Love how the socket is so big it blocks the lights 😂

You have to remember if they are using an older version of the gray drill which is the dewalt dcf900 which come out in 2015, you have to remember the battery type and charge, because a 5AH battery is going to give it a little more juice than wjat a 2AH battery would

So they both work. Cool. I'll take which ever one cost less.

To me, these types of demonstrations don't prove much. So - one driver cranks a nut at a fraction of a second quicker than another brand. That wouldn't change my life one bit.

I believe yellow still has the highest rating according to Torque Test Channel

a very cunning comparison is the gray painted dewalt dcf900 and in the 3rd stage but the problem is that the tightening torque is always less than the loosening torque therefore milwaukee wins but the milwaukee's tightening torque is close to the dewalt's loosening torque, so the dewalt cannot be removed quickly and we do not know what is happening in the background. and battery charge status is important, so do not trust such tests and remember that there are no unbiased youtubers.

This test should be an electric battery model against the compressed air model.

It’s cool that the 3 gen high torque for two weeks was the best high torque just to get out classed by dewalts new one high torque with “V-Tech” I really want to see Milwaukees version with the Forge 6.0 because those to tools would smack the shit out of any bolt

TTC is everyones T&D department now

Milwaukee is 100% the best on the market for any industrial/equipment work. I have seen just about every other brand in shops, and milwaukee beats them every time. Air is the only thing that actually beats out the milwaukee. But it is a heck of an investment

Ill take the Gray one it works and save me money

Best thing is, both tool's are same but one is paint and other is lebe with company branding

If you notice, the left hand of the red impact user was slipping, indicating he was pushing hard towards the nut when tightening. Then, not at all when undoing. Believe it not that makes a huge difference in energy not being wasted by the socket jumping around on the nut.

I like how they hold the impact guns differently depending on what brand they are using

I got the small one of these, love it on the farm

I love my 1/2 inch impact but I will say this in case you are listening Milwaukee..the ones you are making now don't hold a candle to the very first ones..put the original guts back in them and make Milwaukee great again

That doesn't look like the big win the sales guy was looking for 😂 For those who haven't figured it out, the other drill is a dewalt dcf899... released in 2015 🤦🏻 Edit: it is the 900, so I'm 99% sure this is fixed, since EVERY independent test has it the other way round...

Honesty for home work the Parkside performance is amazing for thier price! I just can offer the performance series of parkside.

Older dewalt model with normal battery vs newest red with a stacked lithium battery thats proven to make the tools stronger

Hey Milwaukee! I just wanted to let you know, I'm moving up there in a couple weeks from Texas! See you soon!

Ive used both multiple times doing the same work, red wins everytime

I have one and they are absolutely amazing i use it on semi's, tractor. Def worth it

Milwaukee is awesome 😎. But there are many other great tool brands too. I use Milwaukee and Makita for the most part because I have batteries. DeWalt is amazing too

So it looks like it might be a the DeWalt dcf900 spray painted grey.. My bet is those are knockoff batteries on it, because on the Dyno the dcf900 is superior. Curious that they would spray paint the entire tool, and batteries for a comparison.

Muy buena idea de comparasion

Looks like they had to pick a wire out battery on the dewalt it’s just flopping around on it. But still got the job done with out the battery falling off. I had Milwaukee, it was great at first but then the battery’s kept falling off because there locks suck balls. Then warrenty the dam thing and it take 6 weeks to get one back. I got sick of the problem and switched to dewalt since I could just walk on a Mac truck and get 1 for 1 no questions asked as long as the gun and battery are within warrenty. Plus the Milwaukee can’t take a hit

Nothing better than Milwaukee

Bill me already , I want it

Try the dcf901 next time the Milwaukee is great but bro dewalt crazy good

Anyone else notice how the brand new milwaukee is brushless and the grayed out dinosaur of an impact is beushed?

Old dcf900 non xr vs the new Milwaukee which grips still can break and the old tool can still cut the mustard, waiting for the 900 replacement as my 961 is fab love the torque and application of torque less issues with battery’s so far and qc, there 39 923 blows the new snap on 3/8 out the water as well for far less then half the cost. Can’t moan when you’ve got the battery’s.

Hahahahah it is evident how the Milwaukee operator at the beginning with the gray releases the trigger and fakes the vibration with his wrist. This way we are all capable of winning the challenge. 

The thing is those impacts are the same Milwaukee impact. One is just painted

Yea but my mid torque will do the same with the current Milwaukee. Reverse the test and don’t spin your wrist back and fourth while using the dewalt

Nobody needs Milwaukee. We need Dewalt, Bosch, Makita, Festool

They really got Milwaukee going against Hercules smh

This test isn’t to far but I get you want to show off your new tool in a better light. I am a fan of dewalt tools but I think Milwaukee makes great tools as well a better test to show off the gen 3 is you a torque wrench and torque both bolts to the max break away for the gen 3 and watch and see the dewalt not be able to remove it. This test just shows the gen 3 can do more bpm which makes a bolt tighter sooner

it's normal no matter what the brand is.. it starts great.. if you always force the coil to heat up.. the coil will burn.. then it starts to slow down or a year or more after using it all the time. .

vast majority of videos on youtube shows new milwaukee, it's almost impossible to find a video with old, hardly used milwaukee. Interesting why😁

This was a failed demonstration cause cause it was few second difference and the Milwaukee usually has the higher rpm of the impacts so not much difference but one cost twice as much

Honestly this is a very controlled experiment because we have NO clue if the grey impacts are even in the same torque range. Could very well be a mid torque dewalt going against a high torque Milly.

Dammmmmmmmm Milwaukee is the best ❤❤❤❤❤

That’s the old dewalt. The new one absolutely blaster the Milwaukee one

They think they’re slick with this one

Have the 3/8 and half inch impact guns nothing can beat Milwaukee

Generally when I work I’m trying to make money. Buying Milwaukee tools is like throwing all your profit away. Get over it

Id prefer durability, ergonomics and consistency over speed or power

This gun is better than A RANDOM UNKNOWN OLD GUN. Wow. *slow clap*

Unless its project farm I'm not buying it . Literally

I got the 3/4 drive Bolt buster man

That milwaukee is game changer I have 1! It's no joke! I really like it!

The red ones always break when warranty runs out that’s why I’m going back to air gun

Let's be honest, some like Milwalkee, some like Makita o Bosch and some Dewalt. Once ur in with a brand it's too expensive to change to another brand, all will do a job

Team yellow on impacts it loosened what the Milwaukee couldn’t

Can't tell if that's a Hercules or DeWalt but either way it did it and for at least 100$ cheaper

Them boys are using the 5 year old dewalt dcf899. Dewalt has came out with a new high torque this year, the dcf900 and the mileaukee cant touch it.

Milwaukee dude looks nervous as hell😅

So that mean the grey drill is better right since the nut where it was at at first release first when switching the drills everything Milwaukee is ridged

Never trust people who test there own shit. Trust real numbers like the torque test channel which is unbiased.

Do I see DeWalt on speed one or my vision suck because the light is on first spot and Milwaukee has the 3rd speed

Hey where is the Honda crank bolt? Lol

They look for the cheapest China thing and the screw is off 4 seconds later 😂

actually a legit run

Honestly... Buy the grey one. It made it easier for the red one than the red did for grey...

Whats he gonna do with the 5 seconds being faster? 😂😂

Сына Сотоны сюда!

L'huile de coude marche pas mal non plus avec un bras de levier !!

Wouldn't be without it!

Am i the only one who remembers when if you held the impact driver like the guy in red is , it would try to brake your wrist

Now against the makita xgt 😊

jadi pengen impact driver M12 gen3 nya😬

UGGA DUGGA!!!

They should've but a powerstack the dewalt

My DCF961 destroyed it. Sorry milwaukee. Not there yet

I saved two seconds!

So now the second most important thing is what the price difference

Milwaukee guy probably not depressing the trigger consistently. The only test we can trust is from the (torque test channel)... Who cares if its 3 seconds faster. Price to performance wins

take the gray one you can buy 3 for the same price

I have it so amazing 👏

We all know that was a Dewalt impact painted Grey.

You know if they spent as much time and money actually making their tool better instead of just telling us it was better, then maybe it would actually be better!

Not even using dewalts best high torque…

I dont understand why you guys spray painted the dewalt grey

Do that enough times and the Milwaukee will shake itself apart

Conclusion half a second is worth double the price

When does the 3/4 drive come out?

They definitely mess up those other drills

I like how this comment section is just full of dewalt fan boys claiming that that's the older dcf 899 (it is not) and claiming that the dcf 900 is more powerful than that milwaukee (it is not) because thay can't tell the difference between milwaukee models making themselves look stupid and milwaukee fan boys not knowing enough to dispute them making themselves look stupid.😂 btw im a dewalt user but just an overall tool fan

Is that a dcf900? Because the 899 looks the same but is way less powerful.

Ten test pokazał że DeWalt i tak odkręci chodź jest prawie połowę tańszy

what the f*** is the other one

These Milwaukee tool testers are some real winners. They use people that’s never seen grease on their hands can call someone to change a flat

Eu só queria montar meu armário de cozinha... Será que uma dessas vai atender??

Okay now use the Milwaukee on the same ones the grey one is old and prolly not all the same specs

Now put it up again the new dewault….

Great marketing guys. Use the previous gen of he competitor to your current gen so that way it doesn't loose. 😂

Use the Ingersoll rand 1/2 brushless you ain't testing against the big boys

36V Metabo HPT

No real professional cares about a one second difference. It’s about how much abuse the tool can get before I kicks the bucket.

Am a makita man, u will never be able to convince me Milwaukee is better 😂😂