Is the concentration of your cutting fluid on the low side? Check out the third installment of #Haas ' Machine Tool Coolant series - Topping Up a Low Concentration - at kzfaq.info/get/bejne/aaxppNCH17TUnWw.html #mfg #automation #CNC #cncmachining #coolant

At a shop I worked at we had a DI system that ran lines over a 55 gal drum of concentrate and the plumbing at the drum had a valve that allowed a variable amout of concentrate to be added to the water so it came out of the hose pre mixed and went straight into coolant tanks or buckets. If the coolant in the tanks were at the correct concentrate or higher we did add straight water to the tanks to top off and checked it again. We also cleaned every tank once a month and our systems stayed clean as fuck. Usually they never got as low as the demo here unless it was hot and everything was evaporating quickly.

I can't imagine any shop owner going through all this.

Excellent coolant maintenance tips It's useful for my business

In your visual demonstration, you did not use the same proportions; you used 1 part coolant to 4 parts of water, then you used 1 part water to 4 parts coolant. That will in itself give you poor results

Hi ***** - There are many high-quality coolants available from a variety of manufacturers. Any of these coolants should work well, as long as they are properly maintained. Here at #Haas we are using Castrol Hysol MB 50. This “high-oil” semi-synthetic has proven quite successful across the various machines and material types we use in our machine shop.

In the company I work for we have a blaser swiselube mixer which screws into a blaser mineral oil barrel. A hose pipe then directs tap water through the mixer and into a bucket mixed and ready to go. There is also a knob you swift to lower and increase the percentage of the coolant. We get our coolant in our machine lab tested and everything is always fine. I think this method is long winded and a bit ott.

If you have the money for a Haas, then you should have an inline mixer from a drum. Why would I have my machines sitting idle while you're playing around with coolant concentration levels. Set it to mix correctly right from the drum and simply check it weekly with the refractometer. Occasionally you might need to spike it a bit to maintain the %, but there's no reason to mix anything by hand on these high production machines.

Hi, Do you have any links for the manual pump?

Im new to CNC. How do you calculate the dimensions for the graduated bucket?

What if my machines coolant is literally green, is at 2%, hasn't been drained in years, and has thick layers of way lube mixed with coolant floating on top in this thick gooey mix. Also, is smells like sombebody pissed in it then dropped a dead rat in the tank to let it rot. Should i find a new place to work?

What happened if you fill up the tank with only concentrate? ?

Emulsion brand name? Do you have any suggestions? Who What kind do you use?

Could someone please guide on how to make this cutting oil? The ingredients and the manufacturing procedure? Also, is it suitable for machining cast iron parts?

dump it in the machine and turn the coolant on is what i do, aint nobody got time for this

Thanks for share

what is the brand name of liquid?

Why do you add the 1 to the .06 concentration number at 8:28?

Could you use distilled water instead?

Rolltech Innovation manufactures machine coolant saver. Serious threats to productivity and health are bacteria and fungi which are commonly found in industrial coolants. This coolant bacteria filter has some advantageous features include: last a life time, with guarantee of extended life of coolant with bacteria filter - no consumables, no electricity, no chemical dosing, etc. It is a one time investment, ROI within 4-6 Months, Saves on input of fresh oil and disposal cost like etp treatment, or giving it to authorised recycler. These mineral oil based coolant are prone to generation of bacteria which produces foul odour, often from hydrogen sulfide [rotten egg smell]. Rolltech Innovation "Aqualogic" filter is an innovative and economical method of continuously controlling these micro organisms and the odour they generate. "Aqualogic" bacteria coolant filter consists of series of high-purity multi-metal fibres cased within a stainless steel tube. the dissimilar ions in the multimetal alloy bed undergo a natural electrochemical reaction, also known as an oxidation-reduction reaction. Which Kills the all the Microbial activity in the coolant 24/7 call us at +91-702-723-6191 or write to us at rolltechin(at)gmail.com Enjoy the coolant being running without changing it, just keep the coolant healthy

вот это "молоко" kzfaq.info/get/bejne/aaxppNCH17TUnWw.html начало 3ей минуты

I don't know why I'm watching this, I guess because I think the guy is cute?