Macintosh IIci Restoration: Lots of faults with magic smoke!

Рет қаралды 1,004

4 ай бұрын

#marchintosh #retrocomputing #vintagemacintosh
For the finale of our Marchintosh series, we have a Macintosh IIci which has multiple issues! There will be a follow-up part 2 of this series, we had the magic smoke! and also some other faults. Come along for the ride!

Пікірлер: 14

@ConsolesRetro 3 ай бұрын

Nice work! Another IIci living! 👍

@BigBadBench 3 ай бұрын

That was a wild ride. Can’t believe one freaking bit corrupted that ROM.

@iiidiy 3 ай бұрын

Man that was a lot of work! Really felt you at 1:26:58 - laughing at the frustration... just to get one working system, you wind up fixing a chain of things 😂 Awesome catch on the ROM. Nice restoration!

@aplmak1 3 ай бұрын

Excellent buy in my opinion 👍

@gmcnewlook 3 ай бұрын

“Here we have….” I miss retrochad

@charlesdorval394 3 ай бұрын

LMAO "has a flat side" I've got to remember that one :)

@danielramirezv 3 ай бұрын

I expected smoke from the power supply, not the network card!😆

@cla3d 3 ай бұрын

the network card I have in my IIci can't connect to a modern router. I had to use a 10base-t hub to connect it, then connect the hub to my modern router for it to work and connect router to get internet. That may be why that card doesn't work. Also could be that missing part but if you have an old hub you may want to try that first.

@neilmayo6868 3 ай бұрын

Time to send the card in for warranty. 😁

@John-dp5ve 3 ай бұрын

Love your vids. I need a floppy drive if you’ve still got any?

@leecremeans5446 3 ай бұрын

What's happening here is that the card's port autodetect is getting confused by the NWAY negotiation and switching back and forth between AUI and twisted-pair. I had the Mac LC version of this card years ago, and I ended up rewiring it (poorly) to force the DP83902 to use the TP port. I think a pin needs to be grounded.

@leecremeans5446 3 ай бұрын

Okay, I found it. The AUI-TPI select (pin 72 on PLCC, pin 75 on PQFP) needs to be grounded. There may be a trace going to the Asante gate array that needs to be cut as well.

@THEtechknight 3 ай бұрын

Its funny, I have not had this problem on any other 83902 and 83932 cards. Just this one. Always the question of... why? Thanks for the advice! I will have to try it!