Hello Dennis, Happy New Year 🎉. Hope you're feeling better 🤞 I got this trick from Pete's mate Ric and thought I'd share it 👍 I was going to enlarge the hole on the servo saver to fit a turnbuckle but thought it might crack so opted for this version. It does the same job with no breakages 👏 You hurry up and Get Well Soon ready for the next Screwdriver Challenge 😎

Cheers Craig. It's a cheap and cheerful mod that takes the slack out of the steering. And with the choice of rear body post, you can give your Mad Bull a free facelift 👍

Hi Mads, I thought this trick would be great to try first as I was scared about drilling a bigger hole in the servo saver top plate just in case it split but a turnbuckle would also improve the slop in the steering 👍

I think it improves the steering characteristics tremendously Del. Out of all the Mad Bull's that I have, this pink one and the blue one are the only ones that I haven't done the steering mod to. This black one I built up for a so-called friend who decided that he didn't want it so I sold it to someone else who thinks it is the best handling buggy he has driven 👍 And it's a cheap mod to do 😎

It's a simple mod that takes the slack out of the steering 👍 and you don't have to pay loads to do it either 😊

Hello Damien, you're not wrong about the handling characteristics of the DT-01 kit. They certainly do have a mind of their own and they are a bit like Marmite. You either love it or hate it. I love the Mad Bull but hate Marmite. I didn't enlarge either of the holes to slide the steering rod into its position but I did cure the amount of play there was on the standard build 👍

You're welcome Gary 👍

Hello John, I thought it was a cheap and cheerful quick mod to do on the Mad Bull. They're not everyone's taste but I think they are a blast to drive. They certainly will keep you on your toes 👍

It certainly is Cameron when your hacking across the grass 👍 I sometimes think the car has a mind of its own 😎

Hi Addam, it's easier to show on film and explain what goes where than it is to describe in writing when someone asks about it. This hobby is about sharing our experiences and how we overcome the challenges that we come across when we are replacing the standard parts for alternative parts.

@@cw-01creations46 well said!!! Thanks again!

@@AddamsPlayground You're Welcome 👍

It's cheaper to build the kit from spare parts than it is to purchase a whole kit 👍 as I found with most of my builds 😀

@@cw-01creations46 havent even compared the price on just parts vs the hole kit, the Mad Bull kit is arround 117 euro here.

I know that you know that you are getting a DT-01 Mad Memorial Bull Buggy in black similar to the black one in this video, young Grasshopper 👍 complete with instructions AND oil filled shocks but no electrics unfortunately due to the weight and yours will have the yellow rims WooHoo 😎

@@cw-01creations46 I didn't want to seem presumptuous! 😝 I'm definitely looking forward to that!!!

@@CarminesRCTipsandTricks Hopefully the Postman will pull his finger out and bloody hurry up and deliver that box of lovleyness to you 👍 And I've just made that word up cos my predictive text on my phone kept coming up with a question mark 😎

@@cw-01creations46 I'm an excited little sh!t! 😆 Me mailbox is tingling!!! 😜

Thanks Duke 👍 Much Appreciated 😎

Morning Sunshine, sorry to hear that you're not very well ☹️ I'll post your box of lovleyness later today so that you can unwrap it in the comfort of your hobby room 👍 I hope that you are feeling better sooner rather than later. I unfortunately won't be able to come out and play until the end of February due to my commitments with Maisie and I have a new car lined up for March/April, not brand new but new to me - Hurrah 😎

@@cw-01creations46 I was going to ask what's happening with Maisie and her op. Hope she's ok. Thank you in anticipation of my surprise gift. Really looking forward to that. We will organise a meet up as soon as we can manage. Very best wishes to you and Maisie.

@@PeteWylieRC My little princess was due to have her op on Monday 20th December but as she came into season, her op was cancelled and has been rebooked for Friday 28th January which is better for her as the Vets wouldn't be able to operate while she was still in season. I've got 3 wks off work as I need to monitor Maisie so that I can change her dressings every day and to make sure that she doesn't pull her stitches out and take her medicine like a good girl 😎

@@cw-01creations46 ooh I just got a package from TJD Models! I'm all bunged up and sore throat with Covid at the moment so I'm going to leave it all packed up till I'm well enough to unbox on camera. I've got some video of me unboxing my Lancia Delta at Christmas that I can put up in the meantime. Thank you so much in anticipation of opening it and the surprise contents. I've got all your bits wrapped up that I can post over to you once I'm allowed out. Otherwise it will be when you are able to get down here. Let me know and if you want me to post them then email me your address. Thanks again 😁

@@PeteWylieRC I'm sorry it's a tad late but at least you can oggle over it in person and not on a TV screen or magazine 👍 I shall receive mine from you when you're feeling 100% tikkity-boo at our next RC outing at Holmsley 👌 We hope that you are getting well ✌️

Thank You 👍 Out of all the Mad Bull's I have, I've done this mod on seven out of nine. I know they have terrible handling characteristics which is probably why I love them so much 😎

Thanks 👍 I thought it would be useful to share as some people have a DT-01 Mad Bull or Memorial Buggy 😎

@@cw-01creations46 enjoy champ..you alsow welcome to check my new vid..😝

@@g.bjumpsbashing3062 just subbed you 👍

The chrome ones are Wild Willy 2 wheels otherwise known as WR-02 wheels. They are 12mm hex at the rear and bearings for the front. Or you can just use the standard yellow Mad Bull rims as they are the same setup and you can also get Gold WR-02 wheels too 👍

Hi there, thanks for watching 👍 Yes, you put the heat shrink tubing on the rod end to end as described in the video and the tubing takes away the slack that you would normally have on the rod without the tubing.

Thank You 👍