[Made by me] How to install Onduline roofing step by step

Рет қаралды 154,242

10 жыл бұрын

Onduline sheets can be used for DIY applications: pergolas, patio, extension, carport, garden shed, green house or leasure housing... Compact, easy to transport and to install, flexible, available in different colors, Onduline is an ideal solution to realize all your creative ideas for your garden!
Find us on :
www.onduline.com/en
Twitter / ondulinegroup
Facebook / ondulinegroup

Пікірлер: 18

@gillard125758 9 жыл бұрын

Phil - Flatter roofs require more support as its lesser slope does not redirect roof loads as efficiently. Also, snow and rain loads shed off faster on steeper sloped roofs. Jamie

@Joemccxc 3 жыл бұрын

Russell: Make sure you wear PPE, especially the hard hat. Richard: Naaaah. 😄

@grimbleahoy 8 жыл бұрын

on a single pent shed, is there any add-on to create a drip at the top end to stop water ingress?

@smezley50 5 жыл бұрын

I have installed Onduline on the flat roof shed and I'm very pleased with it and how simple it was to install. I am now considering installing it on my summerhouse / office and adding some insulation would help to keep it cool in the summer. Can you tell what was the insulation you used? Thank You.

@OndulineGroupOfficial 5 жыл бұрын

Thank you for your message and your interest in our products. The choice of insulation will depend on the performance you need. For instance, you can refer to the basic specification from Kingspan TW50 1200 X 450 X /100 or 25mm or for more general purpose the polystyrene EPS70 - 2400mm X 1200mm X 25mm as used in the video. We invite you to directly contact our team in the UK, they will be able to assist you onduline.co.uk/contact/ Onduline Team

@JohnDoe-xl1qs 8 жыл бұрын

can I get this in different lengths and colors

@namiroraha7473 8 жыл бұрын

do you sell it in Australia?

@mmd1957 9 жыл бұрын

Wouldn't strong wind drive rain under the top ridge as there are gaps with the corrugated sheet and the flat ridge material?

@georgetellis9483 Жыл бұрын

Highly likely.

@fatphilg 10 жыл бұрын

Just a quick question... Why does a flatter roof require attaching at 45cm and not 61cm points? What adds the need for this extra security?

@namiroraha7473 8 жыл бұрын

wind load will be greater ......

@mmd1957 9 жыл бұрын

Im asking as I am considering using Onduline and want to ensure it will be watertight.

@OndulineGroupOfficial 9 жыл бұрын

Mike Shipman Thank you for your enquiry we are pleased to confirm the following: The Onduline roofing system when laid in accordance with our fixing instructions with sheets cut tight to the ridge line abutment will remain weatherproof in storm force wind conditions. So whilst it is possible to seal the corrugations with eaves corrugation filler strips at the ridge, this action will close the high level roof ventilation which unless other ventilation provision is made will result in a significant increased condensation risk within the building and is therefore not recommended. The Onduline instructional films available on line should be of assistance: www.onduline.co.uk/videos/ We hope these notes are of assistance.