Making Hydraulic & Hydrostatic Dump Truck

Рет қаралды 953,959

Ай бұрын

• Hydrostatic Mini Dumpe... - Mini Dumper Let's Make It Even Better -
In this video we will show you how to make an interesting vehicle that will be very helpful on the farm and around the house.
You might say it was easier to use a lawn tractor and convert it, maybe it was, but we didn't have one and we had a lot of parts we wanted to use.
Parts we used:
- Hydrostatic transmission from a lawn tractor
- The main frame is made of a 70x50x3 mm channel
- The steering gear was found in a scrapyard, unfortunately I don't know what car it came from.
- Briggs & Stratton petrol engine 14 HP
- The seat is from some lawn tractor
- The footrests, sides and crate are made of 1.5 mm stainless steel
- Fuel tank from the gx200 engine
- The air conditioning compressor is probably from a Ford
- Hydraulic pump with a capacity of 10L / min
- Hydraulic cylinder with a height of 200 mm
Specifications are:
Weight approx. 250 kg
Load capacity on the trailer: approx. 400 kg
Power 14 km
Maximum speed 15 km/h
The dimensions of the box are 90 x 96 x 40 cm
Check out our other videos:
• Making revers trike to... - Making reverse trike to Have Fun :D
• Making Hybrid Stump Gr... - Making Hybrid Stump Grinder
• Making 14 Hp Brush Mow... - Making 14 Hp Brush Mower - using Lawn Mower parts

Пікірлер: 414

@tattooedredheadx Ай бұрын

Protect this man at all costs, we need him in the coming apocalypse.

@DanKoning777 Ай бұрын

Wouldn't it be wiser to seek/know how to avoid being here for what you've rightly said IS coming [tribulation/apocalypse]? Sadly, most reject the truth/answer when they hear it because it's inconvenient to their lifestyle. If people only knew how bad it's going to be [globally] for those who reject the answer: To be right with God; Jesus-by grace thru faith *apart from* human effort: good works, rites, ceremony [Eph 2v8-9; Gal 2v16/3v10/5v4; Rom 3v20]. *"Truth is a stubborn thing"* "For then *there will be a great tribulation,* such as has not occurred since the beginning of the world until now, nor ever will" [Matt 24 v21]

@olens.6987 Ай бұрын

"for those who reject the answer" Didn't God say that this would be how it is in the end?😫

@lesd40 Ай бұрын

You're a great fabricator...always a pleasure to watch!

@MadeinPolandChannel Ай бұрын

Thanks! 👍

@josepharagon8259 Ай бұрын

You should start production… AMAZING INGENUITY…!!!!!!!😮❤😮

@chazholder8365 29 күн бұрын

@@MadeinPolandChannelqqq

@ambermason5056 28 күн бұрын

Nice build

@geraldsundberg3610 Ай бұрын

A nice build and a useful machine.

@nonconformist4208 Ай бұрын

Pracowite i zdolne to chłopczysko z Podkarpacia , a propos najbardziej podoba mi się ta piła do cięcia , chyba sobie taką kupię do krajania mojej swojskiej suszonej kiełbasy 👍👍👍👍👍👍👍👍

@piconano Ай бұрын

It's always a pleasure watching a master fabricator build stuff.

@user-ce7tj5rg3i Ай бұрын

Молодец мужик рукастый !

@parttimetourist Ай бұрын

True Professional and I couldn't stop watching this magician from start to finish and I hope he is self employed because he is too good to waste on someone else

@frankdodson3534 16 күн бұрын

It all depends on how much an hourly wage one would be willing to pay. That way one meaning the employer would be the person dealing with the daunting task of running a business?

@DanTheMan0695 Ай бұрын

EXCELLENT idea with the AC compressor clutch. Keep it on the same belt, flip a switch and you have PTO. Love it.

@dimitar4y Ай бұрын

10/10 on the reparability though. There's not a SINGLE inaccessible void, other than the obvious hydraulic oil tank.

@jchrzaniuk Ай бұрын

Silnik z połowy Malucha ;)

@christophbendau1866 Ай бұрын

Też tak umiesz, ty połowa mózgu ?

@user-st3fo5hc3p Ай бұрын

Молодец. Хорошая машина получилась.

@MitzvosGolem1 Ай бұрын

These hydrostatic transmission need larger oil capacity a external filter. For heavy work. Many failed here in mountain lawn mowers. Axels can't carry much weight also. Excellent channel 👍 My grandparents from Poland Lithuania.

@dodgeme1986truck Ай бұрын

I agree even on relatively flat land any transaxle smaller than a Tuff torque k66 just won't last on slopes... Also most transaxles under 1inch axle shaft cannot hold much weight... Best bet is to use transaxle as a transmission with a separate load bearing axle with hubs chain driven from transaxle shafts with a 1.5:1 or 2:1 chain ratio driving the rear wheels

@natereinhold6180 Ай бұрын

It doesn't help that the box stores spec 30w motor oil in the TTs (my homedepot cub's manual states 30w). TT specs 50w in their service manuals. Built in failures. Only buy the mowers from the dealers. They are made in the same factory but built to different specs for the different distributors. You want a JD, go to JD for it, not the box stores.

@2Truth4Liberty 21 күн бұрын

I can only use mine for about 1 hour and then must have a long "cool down" wait for the hot - or else - change out the hot fluid with fresh cold fluid.

@dodgeme1986truck 21 күн бұрын

@@2Truth4Liberty yup I replace the K44/46/48 and smaller with the k66 as a standard procedure for all my lawn equipment once it starts slipping and I avoid the k51... Those k7x are looking pretty beefy though just hard to find for a decent price the k66 is easily rebuild able and much more durable and can be found with differential lockers all the way back to the early simplicity conquest tractors (one version with it is the 1694014 conquest) just rebuilt mine after 600hrs of hard use still operated just fine... just had the case apart already as it took 1 too many dunks in the mud and had a bad input seal from 6ft tall field grass wrapping up on the input shaft

@MitzvosGolem1 21 күн бұрын

@@2Truth4Liberty I would put a cooler on oil somehow . Very poor design on these . I own operate heavy equipment machines and all have coolers .

@mrphotographer3665 Ай бұрын

Dude you are amazing

@HuggieDuggie 23 күн бұрын

Absolutely brilliant - well thought out and skillfully executed

@stevepiechock9234 Ай бұрын

The thing I like the most about your channel is the advanced thinking you constantly put forward. While the rest of the planet is busy destroying itself, you are busy engineering and making positive contributions. I hope you last forever!

@eugenr Ай бұрын

Хорошая работа!

@Leroys_Stuff Ай бұрын

I enjoy watching and guessing what you may do makes it fun. Excellent work

@MrCubflyer Ай бұрын

Really good you are talented.

@MW-qv7ph Ай бұрын

Patrz jaki pomysłowy Dobromir!

@markevans4645 23 күн бұрын

Very impressive skills! Wish I had the equipment you have.

@pawelaco Ай бұрын

Idealny sprzęcik w gospodarstwie, piękna maszyna. Pozdrowionka

@lhe2000 7 күн бұрын

Te has ganado mi admiración, excelente trabajo, gracias por compartirlo 👍

@gucfa3087 Ай бұрын

O Stary, jesteś genialny! Z chęcią bym u Ciebie pobierał nauki i pracował. Bardzo zazdroszczę (w pozytywnym tego słowa znaczeniu) wiedzy, umiejętności i precyzji wykonywanych rzeczy. Mega szacun!

@edwardstephens247 24 күн бұрын

Outstanding job and design.

@SharkyMoto Ай бұрын

i'm here since you only had an angle grinder and a stick welder, impressive how far you have come.

@MadeinPolandChannel Ай бұрын

thanks for being our viewer for so many years!

@garymonsarratt6048 Ай бұрын

NICE JOB...................

@daniellebon9224 Ай бұрын

Bonjour belle réalisation avec de l’a récupérations de pièces automobiles et très bien équipé dans l’atelier 👍

@bymarcatholictinkering 24 күн бұрын

Very talented indeed. It amazes me how you seem to be building this project as if you were simply painting by numbers 1234567 and so on. The detail steps in each phase of the build are truly inspired by a higher power, you are blessed.

@thierrybosc2700 Ай бұрын

Quel travail. Bravo c’est vraiment super. Merci pour cette vidéo.

@kaboom4679 Ай бұрын

Another mechanical masterpiece .

@JH-ve6tx Ай бұрын

Retrofitting an old AC clutch to your hydraulic pump was really done!

@scapriglione8642 Ай бұрын

This might be my favorite build of yours yet! Such a practical and useful creation. Always a big treat when you post a new video!

@iraklisseva2123 Ай бұрын

μπράβο σου φίλε πολύ ωραία κατασκευή χρειάζεται σε κάθε είδους δουλειά σου εύχομαι ότι καλύτερο ευχαριστώ για το βιντεάκι 😊😊😊😊

@FCFDave Ай бұрын

Very nice build and video, thanks.

@jana171 Ай бұрын

Great build... you could go bigger in size and make an industrial version of this... SO cool !

@jimsvideos7201 Ай бұрын

Time well spent. There can't be much to go wrong with this either and anything that does can be fixed easily enough.

@valentin.saniuta.po-derevenski Ай бұрын

Хорошо получилось! Ты настоящий мастер!

@user-pr8fc3oc1k 17 күн бұрын

Ксассно мастер на все руки дар от Бога так держать 💪 лайк и подписка 👍

@doylerabjohn3435 Ай бұрын

That's a excellent built. Something I could definitely use.

@willtricks9432 28 күн бұрын

Great work from a busy man. Thanks.

@donteague614 Ай бұрын

Very impressive!

@Manufacturingsite1 Ай бұрын

Hello everyone have a nice day this is the amazing video

@jimsmirh2406 25 күн бұрын

That’s a slick little contraption you have there.

@nine_lives5597 19 күн бұрын

cannibalizing the AC compressor to use as a clutch for the hydraulic pump was a stroke of genius, very well done

@BranjuPuma-ch3rp Ай бұрын

Amazing talent he have and shareing his idea to everyone how we can make it such . Impossible thing to possible. 🥰🥰🥰

@BEDavisBrown Ай бұрын

Love the build 👍, this looks like the projects on those small tractor forums where owners will add a backhoe or front end loader to their garden tractors.

@nathkrupa3463 Ай бұрын

Great work my master you are awesome engineer thanks for the sharing this video sir 👍 😊❤😊❤❤

@tedbastwock3810 Ай бұрын

Love all your projects, especially your vehicles!! I learned a lot from watching your projects. This one is amazing, thanks for sharing with us!!! How about showing us how to make a 4WD vehicle 😎🙏

@mrmikerc1 Ай бұрын

I love that work excellent excellent work thanks for sharing your video look forward to the next one and I love your welding

@tonysargent1699 Ай бұрын

Cool new addition to the work toys. Thankyou for sharing with us. 😀

@rjung_ch Ай бұрын

Thanks, just great! 👍💪✌

@Barten0071 Ай бұрын

Taczka zmotoryzowana

@DarrellFLops Ай бұрын

good builder very talented keep going we love this stuff

@user-dn8pz9mv9s 19 күн бұрын

Молодец, Всё аккуратно.

@markmaraman8858 26 күн бұрын

Really nice work

@521farmer Ай бұрын

Howdie from Canada 🇨🇦 Sk thinking about how you built this awesome workmanship for what ya do and build thank you for sharing with us this is worth watching ya got this something that can be used and easy to make don't have to be a rocket scientist to be able to do this later mighty fine 😊

@shawngrabowski988 21 күн бұрын

VERY NICE WORK MAN!!!!!!!👍👍👍👍👍👍👍👍👍👍

@kahlid-ataya Ай бұрын

i love your projects because all of them are heavy-duty and really strong

@MadeinPolandChannel Ай бұрын

Thank you 👍

@didierlucas9653 Ай бұрын

Nice smal dump truck . Great job . 👍👍👏

@ianmckay1780 Ай бұрын

Yet another masterpiece of engineering. You always make something that is not clear from the beginning, but as the build grows, everything comes together as one perfect example of what can be done with a little forethought and some considerable skill. Thanks for teaching us what can be done, Much appreciated video, helps add to inspire ideas for the future. From UK.

@JoeD-tm8qp Күн бұрын

Skill level: 10. Amazing to watch

@trucks_channel_razborgruz Ай бұрын

*GREAT JOB! GOOD LUCK TO ALL* 😎

@grzegorzglina5149 Ай бұрын

jak zwykle, rozdupcony system. Brawo!

@metelgodful Ай бұрын

Awesome job and a good job on the paint too I like the color cool dump truck so I take it you're a machinist by trade because you look like you know what you're doing awesome video hope to see more of your builds

@billmullins6833 Ай бұрын

Impressive! Very impressive! Such skill in fabrication.

@NTconstruction 23 күн бұрын

Amazing machine and craftsmanship!

@michaelthrapp8790 20 күн бұрын

That's awesome homemade utility vehicle

@renegade1520 Ай бұрын

Great job!

@stefantomek Ай бұрын

Już wiem jak zrobić wspomaganie w traktorku dzięki wielkie 🤠

@JamesWoodWorker 9 күн бұрын

Kool little machine. I would've made the dump gate hinge on the bottom instead from the top. But that's me. If you had an lever attached to the gate it could be controlled right from the seat of the tractor as well. Lifted and lowered as well as locked. When hinging like a real dump truck things tend to get stuck because of the top. I never understood the reason that dump beds gates was never redesigned?? It is so it closes automatically. I get that. But in the world today. We have better technology and it isn't like rocket science to make a tailgate design flaw fix. You taught me something with the compressor idea. Thanks. I have a lot of them around I can use for projects. How many Polish builders does it take to build a dump truck? Ha ha only one if your a do it yourself genius!! I'm polish and an inventor/builder. I think it was a sarcastic rhetorical statement on how smart the polish are when they started the polish jokes. Because I never understood where they got the premise of us polish people not being smart or not sharp minded. Who knows where this stuff ever gets started though? Good building. Hope you do more videos that give us inspiration and insight.

@alanbanks9677 Ай бұрын

Well done great idea.

@robsdeviceunknown Ай бұрын

You and your genius have single handedly made me take back all the pollock jokes I ever made. Dangit lol.

@patrickrooney5130 16 күн бұрын

Your work is just brilliant. Keep the videos coming. Well done buddy.

@mead6754 Ай бұрын

you mate are one talented guy, Top Class

@user-bt1rp4gv6c 5 күн бұрын

Pozdrawiam,z Alberta ,Canada ❤, dobra robota,Zbigniew

@levonpetrosyan8680 4 күн бұрын

отличная работа, лайк подписка!

@jonathangrenier104 Ай бұрын

Love the longer formats. If i want to skip a section... Tap tap + 10 seconds. Buuut. If I want to watch the whole thing now i can!

@user-lk2sc4zr9o Ай бұрын

Браво Маэстро !!!

@user-rp6hk6ld6k Ай бұрын

Если хочешь чтобы при сварке было видно дугу на камеру. Сделай очень яркий свет. Чтобы камера не меняла яркость.

@francesco_maggio Ай бұрын

Io posso solo dirti che ogni video che fai è un capolavoro di ingegneria. Quanto vorrei poterti stringere la mano e dirti che sei un ragazzo davvero geniale. Grande DARUZ

@johnnyq1233 19 күн бұрын

That's a very cool yard tractor! I especially like the box and hydraulics tilt.

@riverfrontww Ай бұрын

Sweet, great execusion. I've been thinking of building something similar for a while just not made it to the top of the list.

@GuglGavno Ай бұрын

Годный трактор получился. Жалко, что ремень привода и подшипники снизу ни чем не защищены от грязи и веток. Надолго их не хватит.

@elmahdielmahdi6895 20 күн бұрын

It's very interesting. I can't believe this thing😄 walks with such power, relying on a belt

@user-lx3nz4nx8s Ай бұрын

Железный человек, у него наверно повышнный гемоглобин, так железо чувствовать, за что бы он не брался всё получается на высшем уровне. Всего хорошего хорошего вам.

@josephcox4319 Ай бұрын

If you were a small landscaper, that does custom walkways and ornate flower walls, i could envision this hauling sand to the tight areas plus a modular body system where as you could detach the dump bed and mount a small mixer or do a slide in mixer to make small mortar batches. This is ingenious.

@ericprevost5052 13 күн бұрын

super boulot magnifique vous avez des doigts en or 👋👋👋

@petrstuntbiker885 19 күн бұрын

Good work 👏👏👏😉✌️🇨🇿🚜🍀🍀🍀

@RayBecker 25 күн бұрын

My friend, you are a Beast!! Belt is too long, no problem he fabs a tensioner. You have amazing skills.

@samuelmccarty56 22 күн бұрын

Mad skills, reminds me of myself but 30 years younger! I would love to see the build of his pneumonia vice.

@MadeinPolandChannel 22 күн бұрын

kzfaq.info/get/bejne/bahxgb2Dydeqpok.htmlsi=L8emraDRUBfsrrDM 😉

@mattrzewnicki6343 20 күн бұрын

Heck yeah! I'd definitely watch more!

@Michael-mgh-nc6vy 23 күн бұрын

Awesome build great skills

@quantumleap359 19 күн бұрын

Excellent skills, very useful vehicle. Good job!

@bolo1512 Ай бұрын

Za cały dzień oglądania twojej pracy na żywo, mógłbym na fajrant sprzątać warsztat 😂😅

@ElTelBaby Ай бұрын

@ 22:32 ... Who needs drawings & plans 2 work 2;... when they R stored in your Brilliant Mind...

@norolemodel2883 Ай бұрын

That guy can build EVERYTHING

@Anode1kv Ай бұрын

Super super, wygląda naprawdę ciekawie, dużo pracy

@uweherrmann4334 24 күн бұрын

The design might not be up to scratch, but your skills are👋👋 amazing. Thanks for this journey.👍👍

@user-lo6cf3df1x Ай бұрын

Kind of cool but that's why you pull a dump wagon behind your riding lawn mower

@sylvestertinsley1591 Ай бұрын

I was trying to come up with a reason why this would be better than just making it a small dump trailer and all I could think of is "tell me you can't back up a trailer...without tell me " 😂 Impressive fab work regardless

@josephcox4319 Ай бұрын

The issue with a trailer is it's added weight to the tractor plus 2-4 more expensive tires to purchase and not very menueverable and I doubt a lawn trailer could carry as much as something like this.

@zim2063 Ай бұрын

It turned out to be a good dump truck!👍🙂 It can be slightly improved for transporting light but bulky cargo (firewood, hay), and an addition to the sides made of mesh with reinforcements. The additional weight will be small.