Love videos where theres just building and no talking. Some people just like to hear themselves talk 🤦

Hola Pechoo, buenas tardes.

I built a dump trailer a few years ago. My base trailer had coil springs and I cut the truck bed frame right behind them. This allowed me to tilt the trailer bed about 30% closer to the front. It turned it into more of a teeter totter effect. I then built a sub frame for the trailer bed. This required much less mechanical force to lift it, as the weight in the back helped lift the front. This also put the bed right on the ground allowing me to drive my ATV right in without the use of ramps. I loved your idea of lifting it, mine was not as ingenious. The two ideas combined would have been just the ticket. Thank you, I really enjoyed the video.

Top job Mate 👍. You may consider a 2:1 snatch block to reduce winch loading up. Downside would be twice as long to move through full range of motion.

Бесконечно можно смотреть как горит огонь, как льётся вода, ну как работает человек.. РЕСПЕКТ автору, просто МОЛОДЕЦ, руки - из правильного места растут...👍👍👍👍👍

The bed is connected only to the hinge on the frame. The airstream could cause the bed to raise up. Especially if you want to transport something light with great wind resistance. Therefore, I would recommend an additional lock that fixes the bed to the frame, so that this can be ruled out while riding.

It crazy that you did all this without listening to music, and it's even more crazy that I watched this without thinking to put music in the background for it 🤘 inspirational build man!

All you need to do to double the lifting power of the winch, would be to double the length of cable, add a pulley to where the cable is anchored on the hinge, and the cable would be strung through the pulley and anchored on the post that mounts the winch. Excellent video.

Muito bom! Gostei demais! Irei seguir esse mesmo modelo para a minha! Achei a sua muito mais leve!

Excellent build. I love designing and building things and I’ve got to say this was a great build not a lot of people have the ability to design and build on the move.

Cant wait to try this set up on my trailer. This video is exactly what I have been searching for.

Great video. You are clearly an experienced DYI design engineer and metal fabricator and have the proper tools to do it.

WOW YOUR WORK IS AMAZING!!!!❤❤❤

Congratulations on your project. Having done so much I suggest you can add two limit switches and a remote switch with a relay so you can safely operate the tipper remotely and safely.

Łapka za pomysłowość i nakład pracy... Do lekkich towarów ok

Excelente todos s los trabajos y los tipos de video! Lo haves ver tan fácil jeje. Es un placer verte diseñar y soldar.

Muito bom mesmo gostei parabéns

For $20 you can add a snatch block then that winch will be plenty strong. The dump time will take twice as long, but the winch pull will be twice as strong. Great idea, good craftsmanship, and nice video. Thanks for sharing.

It's so cool to see you use the tools you build over the last few years! You're a legend!

nice build, not something I would do to a light weight trailer like this one. Great idea all the same :)