There is obvious mold all through this Ice Maker! Badly needs cleaning, both through machine's auto-clean function and manually (use one-to-one water/vinegar solution). New soft sponge brush, unused soft toothbrush, soft cotton cloth. Otherwise, you're drinking mold spores with the ice. There being visual mold, make certain to run the cleaning cycle several times, draining & replacing with fresh water each time. Also, even before you opened the appliance, it was obvious that it needed dust removal. Canned compressed air, soft toothbrush, small-nozzle vacuum cleaner. Beyond that, excellent demonstration of switch removal, part ID'ing, and replacement. Really, really appreciated that bit of info!

I've been using one of these for the past couple of years... it quit last week. I took it apart and found the exact same issue you did. Ordered a replacement switch this morning. Perfect video - thanks!

Thank you very much. The method worked. I am grateful to you. Greetings from Iraq

Thank you for posting this my daughter Ana was able to to fix my machine following your video, it works good as new.

Thanks so much for the video, had the same problem and just fixed my ice maker for $10!

Thanks for posting this!! I'm on ice maker #2. The first one was covered under warranty when it started doing this "no water" thing, so they sent me a new one. Now the replacement has pulled the same stunt, so I figured it had to be something simple. I'm probably going to fix both of them (I mean, why not..?) And I guess then I'll have boatloads of ice LOL Thanks!!

This switch problem is exactly what I have. Thanks so much for this video Y

Used for an igloo ice machine. Worked perfectly.

Make sure you blow out your fan and A/C fins every so often. I have dogs so this is a problem in my household. *Don't judge me.* 😁✌

Thank you I changed that piece but not the bucket doesn’t lift all the way causing small to different size ice???

saludos exelente esos swicher son normalmente abiertos

Mine was the same problem omg... thx

What did the "exhaust" side of the radiator look like? If it was covered in dust, that's also a problem. Using old toothbrush to clean works well.

Thank you sir!

What about if the add water sensor and every thing else doesn’t cut on

Thank you so much for this video, unfortunately it seems the factory has gotten wise to these videos and the six screws that hold the back on are now put on a way that they cannot be removed, all other screws are fine. Has anyone else run into this issue?

Good information, all the troubleshooting sites only say basic bs, like is it plugged in or did you add water, thanks.

es muy comun que marque add wather y lo mas probable es que tenga falso contacto en el panel donde se conecta ka bombita de agua

Thanks so much...

I appreciate this video! My ice maker is doing the same time and my mom is so upset that it's not working. I followed step by step to fix it but the link you have for the piece says currently unavailable on Amazon. Can you update the link so I can make sure I'm buying the correct piece?

Mine freezes just makes a whole big chunk of ice but doesn't scoop out 😞 How do I fix that??

How many minutes that u have take to make an ice ??

Mine is just not making ice. It goes threw all the steps but its like the compressor is gone

Btw is not peltier , is compressor based

Mine it’s liking what can I do 😢

Before you take it apart fill it with vinegar. Let set for 3 hours. Then try it. It should work. Then run a few times with water to clean out the vinegar. Works everytime for me.

Thanks. Worked for me. 👍🏽

My water tray doesn’t move up

You should cleen the radiator i did mine and it work way better

Link shows "no longer available."

With mine the door flap inside that lifts to move the water is audibly jamming How do I fix this?

hey, man i love your video, its interested i have a problem of my ice machine is making ice but it doesn't make ice cube its creating a shape ice please help me to over come it

Yup, it looks like I may have the same problem, as it does the same thing. Says "Ice Full" when there is no ice at all. Why don't you send me a couple of your spare switches? Thanks.

Can you do a series on Keurig repair? I'll bet you'll get a ton of views.

What is the switch called and where to get

My top bucket with the flap keeps going back and forth over and over even when it’s off. Any ideas?

Only change one???

Thanks for the video. That needs to have the mold cleaned out of it.

Good song, but the harmonica needs to be removed, and the very low vocal needs removed, it interferes with that perfect Tom Shultz tone.

Damn.... that wasn't my problem. My water tray won't move all the way frwd and backward. I mean sometimes it does, but there is clearly a sound inside of the housing that is not normal, when the water tray is struggling to move all the way forward. 😭😭😭 @ me if you know a fix before I open it up. Thanks! ❤❤✌

If water keeps overflowing. This video here shows you how to fix that. kzfaq.info/get/bejne/otJyaKmA2a-ZhGw.html

Me: just buy me a new ☝️ 😭

Hey nerd. Good job.

I turned this video off as soon as he saw the drain plug and said, "I don't know what this is."

mine sucked.....only few months into use and BOOM add water light comes on.....even WITH water in it and no more workingh....terrible product....NEVER BUY ONE...

Thank you for posting this. My moms ice maker broke and she was super upset and close to getting a new one and I was not willing to spend money on one without trying to fix it. Thank you so much for your help!! I was able to fix it just now and it’s up and running again🫶🏼

es muy comun que marque add wather y lo mas probable es que tenga falso contacto en el panel donde se conecta ka bombita de agua