Magneti marelli iaw 59f make virgin

No video

Magneti marelli iaw 59f make virgin

Рет қаралды 7,973

PSI.Company Performance

Күн бұрын

Пікірлер: 29

@raxar123456 4 ай бұрын

Please explain how the handmade port is made and how it is connected to the laptop. the map and codes and colors?

@PSICompanyPerformance 3 ай бұрын

its just a obd plug that i got from the scrap yard and connect to the obd on the abrites. you just need to 12v+ with a switch, 12v- and kline in this ecu and you can find the ecu pin out on google. its really easy and im sure you will get it done in no time. good luck

@raxar123456 3 ай бұрын

Thanks. I will reach out again for questions.

@nikolaosmnk 2 жыл бұрын

Great video, can it read eeprom by obd? Make a video virgin Marelli 4AF

@PSICompanyPerformance 2 жыл бұрын

Thanks for watching.. I think if you have abrites its possible.

@PSICompanyPerformance 2 жыл бұрын

I will my friend as soon as i get one here in the shop

@vincenzomiceli4187 2 жыл бұрын

Come fare collegamenti ant e post e alimentatore

@sgauto6013 2 жыл бұрын

Great job. What should be the correct values ? Thanks

@PSICompanyPerformance 2 жыл бұрын

Thanks for watching. In the video from 4 min 30 sec i show the diferences that need to be edited... First file on top is the original and the second file on the bottom is the virgin...the highlighted in red are the diferences...pretty much in those locations just edit the bites to ff...

@hayalteknikoto Жыл бұрын

Is there a schematic on how to make this cable?

@jcsilva.26 Жыл бұрын

Did you get the schematic??

@raxar123456 4 ай бұрын

and what is the version of software you are using

@PSICompanyPerformance 3 ай бұрын

thanks for watching in this case i was using a 2014 version

@182mcg1 Жыл бұрын

I have quick question I wil adopted this ecu for motorcycle but need to settings rev limit over 14000rpm.it is possible to do?

@PSICompanyPerformance Жыл бұрын

thanks for watching yes i now that these ecus were used in ducati and theres is a software that converts these in to auto or moto applications, if you need only to adjust the rev limiter you can use winols or ecm titanium or other chiptunning softwares to do that. good luck

@CT0KAH 2 жыл бұрын

👍🏼🔥👍🏼 💪🏼🧠👉🏻💶

@hotice3181 2 жыл бұрын

Hi dear friend Thank you very much for this video I have 2 queations 1.When it says ignition off did you remove power totally???? 2..After you make it virgin did you follow any steps in car to run engine?? Thank you

@PSICompanyPerformance 2 жыл бұрын

Thanks for watching. Yes i remove the power totally.. After i put it to the car it starts right up and then hit the throttle 3 times up to 5000 rpm for the ecu to learn the limits...otherwise the mil light will keep.flashing until the limits are learned.

@davidbc7209 2 жыл бұрын

Which Is the versión of fvdi?

@PSICompanyPerformance 2 жыл бұрын

Thanks for watching. The version used in the video is the 2018 version

@morenokosta Жыл бұрын

molto interessante... E possibile sapere in nome del software che utilizzi per modificare il file della centralina e quale hardware mi consigli per leggere e scrivere la centralina motore? Grazie mille

@PSICompanyPerformance Жыл бұрын

Thanks for watching. I use Abrites to read and to edit the dump and also to write the dump back to the ECU.

@morenokosta Жыл бұрын

@@PSICompanyPerformance grazie mille per l'informazione... Sto guardando alcuni dei tuoi video e devo dire che sei veramente bravo

@PSICompanyPerformance Жыл бұрын

@@morenokosta thank you very much.

@manuelegargano4413 2 жыл бұрын

Hi, Is there a software for control units 5AM?? Tanks!!

@PSICompanyPerformance 2 жыл бұрын

thanks for watching there is my friend, but because of the way those ecus are built, you need something like Abrites to be able to read it and write it, also abrites will virginize that ecu or clone it, depending on what you need. Good luck

@vincenzomiceli4187 2 жыл бұрын

Salve nel collegamento vedo un ground in più a cosa serve, per alimentatore 12v

@PSICompanyPerformance 2 жыл бұрын

Thanks for watching my friend I am sorry but cant understand your question

@vincenzomiceli4187 2 жыл бұрын

@@PSICompanyPerformance come fare collegamenti