Magnetodynamics 3d in Elmer FEM
Рет қаралды 991
11 ай бұрынScreen adaptation of the Tutorial 14 Magnetic field induced by harmonic current in a wire
Elmer is free open source computational tool for multi-physics problems. It has been developed by CSC in collaboration with Finnish universities, research laboratories and industry. Elmer includes physical models of fluid dynamics, structural mechanics, electromagnetics, heat transfer and acoustics.
---------------------------------
Website
www.elmerfem.org
@alexandr-spb 11 ай бұрын
У вас должны быть миллионы лайков. Рекламирую, как могу=)
@elcarmo2 6 ай бұрын
Hello Danial. I tried to do the same example as you. But when I make the boolean junction on the freecad the elmer doesn't recognize the two elements as you showed. Body 1 and body 2. Elmer understood that the two elements became only one. Can you help me what could be happened? Thank you
@DanialIskhakov 6 ай бұрын
Look like you skip part of the video were I point at creating FEM Mesh Group. After boolean merge and mesh generating you must unite mesh parts in groups: Solid for Elmer bodies, faces for Elmer boundaries. After this Elmer will read mesh correctly.
@alexandr-spb 11 ай бұрын
Интересно, можно ли расчитать прием сотового в помещении из расчета конфигурации армирования или обшивки помещения? Так можно высчитать какие, например, в доме из морских контейнеров, нужны отверстия, чтобы не прерывать сигнал=)
Danial Iskhakov
Рет қаралды 1,6 М.
AiTelly
Рет қаралды 16 МЛН