Maintenance: Fuel injector servicing Volvo Penta

Рет қаралды 27,901

Күн бұрын

Injector servicing on a Volvo Penta D2-40. The process works much the same for other Volvo Penta models.
1. Why are there so many sirens 0:00
2. Let's do it 0:46
3. Tools 01:45
4. Remove Fuel hoses 01:50
5. Remove Fuel supply pipes 02:40
6. Remove Fuel return pipe 03:45
7. Remove injectors 04:20
8. Intermission 06:15
9. Knucklehead 07:00
10. Torque wrench tutorial 07:30
11. Injector inspection 09:10
12. Injector installation 09:57
13. Fuel return rail installation 11:45
14. Fuel hose installation 12:52
15. Fuel supply pipe installation 13:00
16. Starting bleeding and leak check 13:35
You So Zany by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: audionautix.com/

Пікірлер: 21

@SoundzAlive1 2 ай бұрын

Hi Laura and Dustin, Thanks I am about to tackle this and now feel more confident. André in Sydney

@SailingLifeonJupiter 2 жыл бұрын

Nice one guys... Love the DIY stuff... And ur Aussie vocab cracks me up!

@letsbuyaboathesaid1658 2 жыл бұрын

Thanks! I forget how aussie we all sound until see yourself on video 😂

@thechannel8x Жыл бұрын

G'Day Mate, fantastic instructions, keep these videos coming, please :)

@StormchaserIB Жыл бұрын

Thanks mate ... and brought back memories of doing the same job on my previous yacht where I received a written warning from the Marina for offensive language ... I managed to bend the fuel pipe which was an expensive mistake ... One thing to note - a previous owner had not removed the crush washers where the injectors screw in - and just installed new ones over the top - and it was really hard to tell as the old ones were so ingrained in the engine block... it was only because one injector came out with 2 washers that I guessed it was the case .... so digging out the other 3 and not dropping debris into the block (whilst me folded in half over an engine in Brisbane on a 30 degree day) ... well 4 hours later and another language complaint it was done .... apparently its quite common and some people recon its best to just leave the old washers in place ? Volvo Penta engines are painted green so when you get angry and turn into the INCREDIBLE HULK .. you don't rip the thing out and throw it at people .. instead you think its a friend and you give it a hug ... of course it won't stay your friend for very long as at some point you will need to order some parts (there goes another shirt and pants) ... here's a tip - just buy a spare engine and keep it for parts ... as it doesn't take long to rack-up that sort of cost buying parts separately ...add the shirts and pants bills and its not far from the truth

@kylaholland7767 2 жыл бұрын

Thanks. Just learnt a few things that might come in handy.

@cally123 Жыл бұрын

This vid was outstanding, I'd love to see more engine/electrical system maintenance videos from you, you're very funny and have an excellent eye for explaining how to do these tasks to lay people wanna-be sailors, i.e., me.

@richardtaylor1527 Жыл бұрын

Brilliant video , avtually real life including the ' Oh **** moments' and additional costs when things break.... real life.. yes

@JorgeLopezSegura 2 жыл бұрын

Nice turorial !!!! Tks !!!

@letsbuyaboathesaid1658 2 жыл бұрын

You’re welcome, glad you liked it

@mesientorelajadoalas438 2 жыл бұрын

Oooh master, thanks ! thanks! thanks! Mmm nice t-shirt

@josephwhite4043 Жыл бұрын

thank you! It would be great if you could do one on how to change the injector fuel pump.

@michaelinkster4977 2 жыл бұрын

How long does that take from start to finish? If one or two injectors are faulty, should all be replaced?

@letsbuyaboathesaid1658 2 жыл бұрын

Pulling the injectors out took about an hour, and putting them back in about the same. We dropped the injectors off to a local diesel shop and they did the servicing and had them back to us within 48 hours. When we had ours done, the service shop said one injector needed to be done, however the other injectors tested low and would need to be done soon, so we just had all of them refurbished together. As for replacing the whole injector, that is not really necessary with this type of injector since components of the injector can be changed if required. Hope that helps. D

@michaelinkster4977 2 жыл бұрын

@@letsbuyaboathesaid1658 Thanks, just had all six of mine serviced with new tips fitted.

@StormchaserIB Жыл бұрын

ps .. nearly forgot my favourite VP saying after any service ... "If it bleeds, we can kill it" .... (in Arnie accent)

@letsbuyaboathesaid1658 Жыл бұрын

Don’t you start quoting Arnie with Dustin, the two of you won’t stop!