I put hose over the handles of my ssq. Best idea I had. Gonna need to heat up the hose to fit over the handles, but will shrink when cool.

Oooo. I see a linear actuator operated quick attach in the works. Very Cool. You wont even have to get off of the tractor!

Some great tips Martin. I will do that with my SSQA and see if it helps make it a bit easer. Have a good week! See ya!

I had never thought about greasing the points you did in this video. Great tips!! Thanks! Cheers, Martin!

Great info and video, Martin. That's definitely a place where you don't want a catastrophic failure. Thanks for sharing!

As always, great tips Martin. Most of us can never do too much maintenance nor can we do it too well.

And Martin leaves us with a tease!!!!👊🏻😁 great maintenance tips! Thanks for sharing!!

This information you shared is extremely helpful to me. Thanks!

Awesome video Martin with some great tips on the SSQA. I don't have one on any of the Kubota's but I do on the New Holland skid steer...and yes, maintenance is important even if its only in the form of grease !! Dang, if you aren't meticulous in all your videos....

Oh man!!! Martin that is going to be a great upgrade. Looking forward to the project. Grease makes the world go round. Thanks for the video 😁👍🚜💨🍳

Love your channel , great info . Giving me the knowledge to to DIY. I’m pretty handy with a wrench but some basic functional knowledge is a great resource. TYDIY

Always enjoy, you’re spot on. Have a good rest of your week.

Now I like my John Deere quick attach even better. No maintenance.

Another good one!

“I start by removing the locking pin pivot bolt… I proceed to drop the washer between the bucket and the quick attach plate”. There, Martin. I fixed your script for you. You’re welcome.

That hint of the next project could be a money maker for you. As far as I know, there's no cost effective aftermarket products to do that.

Great Tips!!! Going to check my adjustments thoroughly tomorrow when my Stump Bucket arrives!

Great info! New subscriber

Another great video Martin, thanks! Instead of grease on the pivot points and locking pins I’ve always used a spray dry lube on all those points every time I grease the loader pins, about every 8-10 hrs. That’s a pretty hostile environment that sees dirt, sand, etc falling all over those areas, and I figured dry lube would be less likely to attract and hold on to such abrasives. Either way works, just as long as it gets done. I’m pretty religious about keeping mine lubed, because when I met my wife she had a 5 year old 47 hp Branson she bought new and her husband at the time (an engineer no less) didn’t own a grease gun. It took me a week of hammering and two cans of WD-40 and Liquid Wrench to break those pins and pivot points loose, and ever since then any tractor I own the SSQA gets oiled like clockwork. Experience is indeed a great teacher. Keep making these excellent videos my friend, you do us all a great service! 👍

Hi Martin. Almost like you read my mind about my L3901. One side has always been more difficult to engage/disengage. I will absolutely be following your tip during my next greasing session. Thanks buddy and good health to you. Michael

Well done video, can’t wait to see that next one you have coming.

can't wait to see it I ve been thinking about something like this for a loader

We actually got our Grand L 3560 with the hydraulic power option for the skid steer. I just grease the zerts every 10 hours when I do the test of the loader and tractor. However, I am going to ask the dealer on what you did with your manual handles when I have it on for the 50 hour service coming up soon. I asked the dealer if I could see them do it so I understand how everything works 💪 👷‍♂️ better. I'm adding this toy list of questions. LOL.

Super 🥰 🥰🥰 🥰🥰 👍👍 👍👍👍💯💯

Martin great minds thing a like. I'm working on building the same thing. So I don't have to get off the tractor with my bad foot to attache different things. By any chance are you using a12v Linear Servo that's what I'm using? Looking forward to seeing how you make yours. Later

Martin what was your full time money career? I’m guessing, but probably wrong!

What about using spray can of lithium grease?

I've never yet seen one of your videos that weren't helpful. Especially the video about carrying a chainsaw in the chipper!!