he replaced lefty the week before.

I was thinking the same thing!

@@timmyhipbird7543 ap

I knw 🤣🤣🤣🤣

At 7:46 is that a bloody rag laying next to hammer?

They are very talented guys but they don’t have enough resources and tools to use. Other than we should to bring that art at United States .I hope people will like it. Greetings from Seattle.

@@amjadpervaiz4453 i think it's so hard for us to understand is because we forget the fact that they work for 4 cents a hour or less and have nothing

it is my favorite too!

@@amjadpervaiz4453 compare to the states they fix that with nothing

Word to the mother love ❤️

Nossa vcs são maravilhosos um. Trabalho k requer muita força e energia fiquei surpreso com vcs

muito obrigado

Good job. Highly skilled

I see a lot of complete Cabs around Asia. It would make sense to me the cab over the engine was just swapped out with a new one.

And it only offtracks 6 inches to the left...

Thank you

Meanwhile, in my country - uneconomical to repair. Not my fault I don't have the skills.

@@forevercomputing your labor wages is high

@@HinduPAGANcowpissdrinkerRAKESH £60 to £90 per hour? All adds up.

Я хотел бы, чтобы это могло случиться

@@pakistanitruck обязательно всё будет хорошо. Успехов вам. Ждём новые ролики.

Согласен

Woow in italy they will be all rounded up

One hand is for eating one hand is for whipping shit off ass hairs

No click bait, just as honest as the work we see.

Right. They should have a patreon channel

you are an air hammer

this makes me appreciate where I'm from where weight laws do not allow light weight trucks like these to be over loaded and take the place of heavy duty full size trucks.no wonder they break rails and when they wreck it's disastrous probably with drivers killed in the light weight cabs.

Они этим делом явно , давно занимаются. Рука 🤚 поставлена .

Не только руки но и ещё голова😁

Тоже смотрю постоянно, и думаю сколько раз промахивался интересно знать🤔 ручку приварить куда безопаснее чем так держать 🤪

Может у него кинжал за поясом в качестве гаранта безопасности)))

@@MKV664 Если что-то вдруг пойдёт не так, чем он его держать будет?!

Major Fauolo Absolutely right. These are guys are nothing short of amazing!

there only badass because they do without equipment and create a straight usable machine. takes less skill with modern equipment.

Straightening a frame is nothing special. Its just the wage in this country is so low its cheaper to fix that piece of junk with 20 men for 1 week than to buy another one.

@@Chris-yy7qc apparently you never been an iron worker

@@Airman.. Wrong. Ive already done it myself. lol

Thank you

Welcome

И тут Америку всунули ....и причем она здесь так и непонял

Guess you never worked around these kind of people when you were in OIF/OEF, they consider you and everything you have to be a peach dropped from heaven to be exploited by any means, usually they do it with a smile and lies. But, a few of them are great people, sadly just a few, I had hope to find more but after 15 months, I was disappointed.

Seriously!

I thought the same thing. I'm sure they've had some serious injuries doing that over the years.

Lol I though I wouldn’t put my hand their no chance 😂.

Skill gentlemen, skill.

Donald Henke No kidding, don't care how skilled you are, one miss and you can mess up the other guy's hand for life, use some kind of punch extension.

These guys are in a different level to tell you the truth I thought I was hard core but I have to admit these guy passed me left me behind.

I notice in all these Pakistani truck vids, that the workers are all young. I wonder if it’s because they all get injured, and can’t return to work. These guys do incredible work, but seeing them beating on punches & chisels, using cutting torches and grinders, and no safety glasses or face shields anywhere, working around all this heavy steel while wearing sandals, holding a punch while someone else whales away on it with a sledgehammer etc.. I bet this place goes through employees at an alarming rate! A person would probably be lucky to work there 3 months without losing an eye, crushing a foot, or other serious injury! They do some awesome work though!

Bad press for political reasons is world wide, and it is mainly about GOD, Guns Oil and Drugs. But nothing will take away from the skills of these hard working guys, their boss has to be proud of them, i did my time on the tools, 6 year apprenticeship, but I could still sit and watch these guys all day long, wish i was there, maybe next year, dreaming........

Visit my channal

Very nicely stated. I am a Pakistani American, and I agree, Pakistan gets a lot of bad press in the Western Media for mainly the political reasons. But the common people in that country are very hard working. Also almost all of the Trucks, Buses, cars, Motorbikes, Farm tractors are Made in factories set up all over Pakistan, with Technical Assistance from Japanese Parent companies.

I was thinking the same thing! There is no way I would want to be the guy holding the punch!

same - one wrong move couyld end your career in a place with no social safety net

No kidding we are spoiled in America

Greta Tunberg like it!

There is a more solid reason behind it though... A new truck in Pakistan with all the taxes and associated fees is not a very economical option. Once a vin is recorded and registered... owner will try to keep it going for as long as economically viable.

The trucks are expensive, and labor is cheap. Thus every truck gets fixed.

For me re-use is good .. everything has pro and contra ... Negative and positive ...

As long as you pick up the insurance premiums on something like that going down the road again pal

if you want in usa u can serch haider ali truck art in youtube u can find him in usa

They can show us but they can keep their women

You have to remember that through regulations, the United States government has basically forced the American truck driver to give up on rebuilding, recycling and reusing older equipment. Today's cars, trucks, appliances and other material items are built for a specified obsolescence.

@@mattberg6816, you obviously don't understand the salvage and "rebuildable" title in the United States. There is an entire multi billion dollar industry here in the rebuildable/salvage market that includes semi trucks, cars and pickup trucks. A salvage titled vehicle doesn't incur higher insurance premiums, lmfao. Every state has a rigorous process for registering and insuring salvage vehicles, which includes a much more stringent vehicle inspection of a salvage titled vehicle. Insurance companies auction off thousands of wrecked/rebuildable vehicles every year in the United States, it's a lucrative market.

Thank you

Ковёр внутри кабины вешают, иначе вмиг запылится на дорогах Пакистана.

An unlearned person would say "primitive". hahaha, im Canadian and dont include me in "(we) would call primitive". There is not one thing primitive about this; how else would one straighten a frame? Its not even "old fashioned". Here in Canada, the insurance company writes this off because the labor cost to fix is 20x (im just guessing) of what these "smiths" do in Pakistan. We get paid $40/hour, they get paid $40/month. There is just no more kind of "Smithing" trade in N.America, not for over 30 years. The unlearned would equate a ("bygone era in Canada" = "primitive") when there is nothing primitive about it. Even today's modern body shops have anchors in the floor to chain a chassis down and tug straight with chainfall. My observation, the reality is these "Smiths" in Pakistan have skills do do work that tradespeople here in Canada....dont; that is gone and lost with the generation of my parents. Their frame press makes me *drool*, the possibilities of $$ i would make with that.

indeed

​ Dynamo Joe Was going to say the same thing about the US. What we would scrap other countries return to service with the help of trades people. I dont know what is better but it is satisfying to watch people work and turn a pile of scrap into a usable item again.

@@iBackshift Joe, you are right, the cost of labor is a joke in India and Pakistan. I feel for those folks who are taken advantage of. The 'Boss' walks around with his big belly and his white suit while the workers work there tails off in often terrible conditions. Can you imagine working 12 hours per day in 100 degree temperature and 90 percent humidity? I doubt they get more than one day a week off and as you said $40.00 per month. To me that sounds like slave wages. I would like to hire the whole crew, bring them over set them up to rebuild trucks and have them go at it! If you could pay them $10.00 per hour each it would be a Bargen! They would feel RICH!

@@bobordewald1367 they would feel rich until they had to pay the first month rent in N.America. Then it wouldnt be any different other than the location. People jammed into a living quarter making enough to eat expensive food, pay expensive accommodations and have nothing left over but crumbs. They're doing alright over there or they would be doing work to make ends meet.

The birds looked great but the panda? Not so much.

Igor Rudevets судя по тому что у них компрессоры на бензине работают у них походу и нет электричества:)))

Да, после атомной войны, только они и выживут!

@@raZZkataeV в случае атомной войны индусы на всякий случай из территории Пакистана сделают стеклянную пустыню , так что там никто не выживет, выживут глухие районы наподобие афганистана и глубинки африки

Электричество?ват из зэт?

у кого это "у нас"..?необобщайте

Вы нашли друг друга. Ивановы)))

@@user-kf1er2rv8c 🤣🤣

Your comments are very much encouraged by us

the guys are freaking dangerous. rebuilding a truck that in the US wouldn't even be allowed to run the loads these junk yard mechanics piece back together.guess it doesn't matter they will just have more kids to replace the people killed with these junks on wheels. they have plenty of warm bodies there won't miss a few thousand here or there.It's what you get when you have no safety laws and you allow anything that rolls on your streets.they even repair their damaged tires that are beyond repair and are a safety hazard.

@@timmyhipbird7543 you have to admit it is pretty impressive, I'm not saying it is not DANGEROUS. 🤣👍

You didn't make the truck .

i wonder if the detailing was standard of extra?

Hey I'll do that in teplo TX 9713 Hi way 95 .we do it economics works!

Right tho! That dude was on point with hammer and they moved really fast down those rails.

Потому что никто у нас за их гроши горбатиться не станет.

Там похоже труд очень дешёвый человеческий, а вот техника дорогая, даже лохматых годов. Как у нас раньше, в 80х тотальные жигули чинили, потому что был смысл при дефиците.

Меня поражает, насколько им насрать на безопасность! То, как они усиливают рамы и подвеску, ради повышения грузоподъёмности, это конечно интересно, но дорабатывают ли они тормоза? Когда вместо расчетных 5 тонн везёшь 15 и перед тобой неожиданно появляется препятствие (другой водитель, открытый люк или, не дай бог, ребенок), как предотвратить ДТП?

@@firstguy-mgn ты забываешь что еще в условиях горной местности , пакистан далеко не равнина

@@MKV664 незнаю как в пакистане а в иране растаможка машин очнь дорогая чутьли не встоимость самой машины поэтому у них мало иностраных машин только местной сборки пежо рено.Они кнам приезжают завидают у нас одни тойоты.

И это на допотопном оборудовании, что будет, если им современные станки дать

@@user-lg6gz1ym1k ничего хорошего не будет,выгибать гнутую раму идиотизм,если металл имел деформацию такого типа,он подлежит замене.

@@user-zg8rf3mn7n на Пакистан это правило не распространяется))) У них там рама из набора швеллеров общей толщиной 4см

@@alexbriket5817 у них хундай 5 тоник возит по 20 тонн ясен пень рама по пизде пойдет

Я просто в ахуе от этих пакистанцев унас рамы тянут но что бы раму притом тройную полностью расклепать это респект!!!!!!

Much appreciated!

They wouldn't know how to turn it on.

Thank you

Особенно когда заклёпки выбивают 😊

🤣🤣🤣🤣🤣

При этом все руки ноги целы...

@@user-cu6ym8xu7o так может это сменный держатель пробоя, выдают по три держателя на день)

@@user-fw3qx2pp3t убил. От смеха упал со стула