MAJOR FAIL Dewalt 30 gallon air compressor...plus break in and review

No video

MAJOR FAIL Dewalt 30 gallon air compressor...plus break in and review

Рет қаралды 1,821

Hoobs Garage

3 ай бұрын

A review of my new compressor that was broke immediately. replacement was defective as well.
#dewalt
#tractorsupply

Пікірлер: 28

@michaelbell7465 24 күн бұрын

I have one of these. I bought mine in May 2024 and runs perfect. zero problems. I did a few mods. Larger air filter, vented filler tube, longer tank drain hose and oil drain extension.

@hoobsgarage 23 күн бұрын

@michaelbell7465 it functions OK so far, just ridiculous it could ever leave the factory with all those different fittings crossthreaded like they were. Especially on 2 different units. Thanks for watching and commenting, hope you enjoyed the video.

@kmanrl3112 Ай бұрын

Thanks for the video. I'm going to purchase one of these as the price is right at Tractor Supply. Now I know what to look at before I load it up.

@hoobsgarage Ай бұрын

No problem glad you enjoyed the video. Last time I was there I checked out another one and it was put together decent from what I could see. Thanks for watching and commenting.

@matthewhoffman6520 16 күн бұрын

Dewalt definately has quality control issuess on their air compressors; your not alone. I bought the two stage 30 gallon dewalt air compressor last year around this time, started it up for break in and the nut on the flywheel wasn't tightened down and the fly wheel came off. Bent the shaft or fly wheel as it had a horrible wobble after putting the nut on and tightening down. Was considering ordering another one at the time and decided not to after returning the first one.

@hoobsgarage 15 күн бұрын

@matthewhoffman6520 thanks for watching and commenting and sorry you had problems to. It's unbelievable they let them leave the factory like that. Did you reach out dewalt and tell them about your issues? If so what did they say?

@brewsnoop Күн бұрын

Was about to buy this exact compressor. After watching, I’m going with an IR instead.

@hoobsgarage Күн бұрын

@brewsnoop thanks for watching and commenting. im glad you found the video helpful. I will say once all the cross threaded issues were addressed it does function normally but I still say it's ridiculous it ever left the factory in that condition. Thanks again for watching.

@stevebost8048 3 ай бұрын

I'm in the market for a new compressor myself thanks for sharing I believe I'm going to go to Northern Tool and get one of their North Star compressors.

@hoobsgarage 3 ай бұрын

Good luck with your new compressor. I've seen those north star ones they look nice. Thanks for watching and commenting.

@waynebussert5180 Ай бұрын

Has Dewalt seen any of these videos and have any comments. This is not the only video showing cross threading.

@hoobsgarage Ай бұрын

I specifically sent this video to them. They seemed like they could really care less. Tractor supply was great, I didn't even tell them about the issue with this one I didn't feel like hauling it back and I got that thing put back in there correctly and it's been fine so far. Still pathetic craftsmanship I think though.

@waynebussert5180 Ай бұрын

It makes no sense why Dewalt who is owned by Black & Decker makes the big bold sticker statement " Made in America" and have such quality crap. There is no way this should make out of their plant. At least Tractor Supply cares about their customers. Shame Shame Dewalt and Black & Decker.

@hoobsgarage 29 күн бұрын

@@waynebussert5180 I agree it's ridiculous something like that made it through the line. Thanks again for watching.

@jameshill4900 8 күн бұрын

@@waynebussert5180They don't make it. It's made by Mat industries that makes powermate, industrial air and many huskys. Just painted yellow with dewalt sticker.

@userx702 Ай бұрын

Think this would run a die grinder or air hammer with intermittent use? Hobby guy here who would like to have a die grinder to clean gasket surfaces or even use an air hammer on occasion for rotors.

@hoobsgarage Ай бұрын

@userx702 I haven't used this one very much yet but it should definitely do it for intermittent use. I used to use a die grinder and air hammer (in short burst on occasion) on my old compressor, way smaller than this one.

@theElderberryFarmer 3 ай бұрын

I'd use some Rectorseal on those threads (yellow pipe dope that works for compressed air and for natural gas as well as water). I've always had good results when using Rectorseal on air fittings. What did you decide to do?

@hoobsgarage 3 ай бұрын

Might try the thread sealer. Still won't help the fact that it was cross threaded and probably ruined the threads though. Thanks for watching and commenting. Will probably return it this weekend

@gravelytodd 3 ай бұрын

What is the duty cycle on that compressor ? I chose an IR Garagemate because it has a 100% duty cycle.

@hoobsgarage 3 ай бұрын

No clue. The original plan for the video was to break it in then get the book out and go over the specs. After realizing I had gotten another defective unit the video plans changed lol. Thanks for watching and commenting though I appreciate it.