Tools! Episode 2102: A New Air Compressor!

No video

Tools! Episode 2102: A New Air Compressor!

Рет қаралды 8,796

Күн бұрын

Tools! Episode 2102: A New Air Compressor! In this video the Big Dog50001 shop gets a new DeWalt Air Compressor! The new unit is a portable 25 gallon air compressor from DeWalt, model number DXCM251. I also got some new air accessories to go with it, enjoy!
Be sure to subscribe for more tool and car repair videos!
/ bigdog50001
Buy Big Dog50001 T-Shirts, coffee mugs and other gear here!
bigdog50001aut...
/ bigdog50001
/ bigdog50001
The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com... (As an Amazon Associate I earn from qualifying purchases).
Disclosure: This channel earns a small commission using some of these links - at no additional cost to you.
Tools:
DeWalt Air Compressor DXCM251: amzn.to/2TkOGE2
Milton 1/4" Air Coupler Kit s-210: amzn.to/3xeRvFm
DeWalt 50' 3/8" Hybrid Air Hose DXCM012-0205: thd.co/3zp5OsI
DeWalt 6' Lead In Air Hose: amzn.to/3iCH4HG
Milton Air Chuck 580e: amzn.to/2RMxIxQ
Drain Extension Kit (Don't exceed Air Compressor working pressure): amzn.to/3gtYd3F
Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses or automotive questions.
Have something you would like to send to Big Dog50001?
Send it here:
Big Dog50001 Automotive Channel
P.O. Box 726
Cortaro, AZ 85652
2021 Epidemic Entertainment. All rights reserved.
Disclaimer:
Due to factors beyond the control of the Big Dog50001 Automotive Channel, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Big Dog50001 Automotive Channel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
The Big Dog50001 Automotive Channel recommends safe practices when working with power tools, in on or around automobiles or other vehicles, automotive lifts, lifting tools, jack stands, electrical equipment, automotive modules and systems, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of the Big Dog50001 Automotive Channel, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not the Big Dog50001 Automotive Channel.

Пікірлер: 48

@AntonioClaudioMichael 3 жыл бұрын

Glad there is no bleed off and it's working better then the old setup

@TheDisgruntledMechanic 3 жыл бұрын

I just got milton air couplers.was tired of the hf leaking. Looks like a nice rig. Hope it it works well. Keep us informed on its operation.

@BigDog50001 3 жыл бұрын

I was definitely tired of them leaking too, thanks for the comment Mike!

@BigDog50001 3 жыл бұрын

Be sure to subscribe for more tool and car repair videos! kzfaq.info twitter.com/BigDog50001 instagram.com/bigdog50001/ The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive (As an Amazon Associate I earn from qualifying purchases).

@radicalrenegade8528 3 жыл бұрын

Oh my. I WANT that air compressor! Very cool setup. Great video my friend!

@BigDog50001 3 жыл бұрын

Thanks for the comment 👍!

@AntonioClaudioMichael 3 жыл бұрын

Very nice dewalt compressor

@BigDog50001 3 жыл бұрын

Thanks 👍

@AntonioClaudioMichael 3 жыл бұрын

That Milton digital air chuck is very nice

@feelnrite 8 ай бұрын

Yes but is high like he said.

@AntonioClaudioMichael 3 жыл бұрын

I extend the drain valves on my compressors with brass pipe and put a ball valve on them so it makes it easier to drain never used soft line very cool 😎

@BigDog50001 3 жыл бұрын

Hard lines are better but the angle of the drain valve on the old HF air compressor made that difficult.

@AntonioClaudioMichael 3 жыл бұрын

@@BigDog50001 aww got ya

@NextLevelAutoDiagnostics 3 жыл бұрын

Dave...nice as usual. I have an accurate Astro inflator but find myself rarely using it ever since I got a Vaclife automatic inflator where you set the psi and it will automatically inflate to the desired psi and then shut off. It is surprising very accurate after confirming with my Accu-gage. No more back and forth adding or releasing air.

@BigDog50001 3 жыл бұрын

Thanks for the input!

@dhruvpatel6884 3 жыл бұрын

Congrats 50k subs! Next 100k and more

@BigDog50001 3 жыл бұрын

Thanks!

@AntonioClaudioMichael 3 жыл бұрын

Nice milton couplers

@richardjeun Жыл бұрын

I see how you posted this video over a year ago. So far, any problems? How much, before tax, approx, did you pay for this unit? You can use the regulator to bring the pressure down to 120 psi, then plug it in your harbor freight (with a quick release installed on one of your ports on the manifold that goes to the main tank, not after the regulator) to increase tank size and cfm; with both units hooked up on its own dedicated electrical outlets, they can run together if need be. Only the loud compressor will kick in if your dewalt lacks recovery power. You can probably paint nonstop.

@BigDog50001 3 жыл бұрын

*Tools* Disclosure: This channel earns a small commission using some of these links - at no additional cost to you. DeWalt Air Compressor DXCM251: amzn.to/2TkOGE2 Milton 1/4" Air Coupler Kit s-210: amzn.to/3xeRvFm DeWalt 50' 3/8" Hybrid Air Hose DXCM012-0205: thd.co/3zp5OsI DeWalt 6' Lead In Air Hose: amzn.to/3iCH4HG Milton Air Chuck 580e: amzn.to/2RMxIxQ Drain Extension Kit (Don't exceed Air Compressor working pressure): amzn.to/3gtYd3F The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive (As an Amazon Associate I earn from qualifying purchases).

@HotRod-wv4vm 3 жыл бұрын

Nice 👍

@BigDog50001 3 жыл бұрын

Thanks 👍!

@themechanic6117 3 жыл бұрын

Nice upgrade ! 👍

@BigDog50001 3 жыл бұрын

I hope so lol!

@arthurfricchione8119 3 жыл бұрын

Dave very nice. I have the Dewalt 15gal. 200psi model. I’ve had it for a few years now and it’s problem free. Noisy yes but nothing you can do about that. It sounds like yours runs pretty quiet seeing as it’s oil lubed. I liked that. You know me when I get one of your positive tool reviews. Mine is only 5.0CFM AT 90PSI. It does the job. It had no problem breaking the Honda crank pulley bolt loose for the timing belt job. Anyway let me know how you like it. Dave you and family stay safe and well Artie 🇺🇸 Dave I stayed to the end do you like the hose and is it flexible. Up north here the poly hoses get very stiff in the cold. Real pain to roll up. Let me know I’ll buy some accessories. 👍

@BigDog50001 3 жыл бұрын

It certainly doesn't get as cold here as it does up north but I'll let you know how these hoses hold up after I use them for a while. Thanks for the comment Artie!

@Zib187 3 жыл бұрын

I was looking at that same compressor about a year ago. I should have bought it then because it was cheaper. Ended up going with battery impacts to save space in the garage.

@BigDog50001 3 жыл бұрын

Space is definitely a factor!

@robb8773 6 ай бұрын

How easy is it to move around? Is it too top heavy?

@feelnrite 8 ай бұрын

I wonder what you paid for the compressor two years ago?

@richardfabrizio8998 3 жыл бұрын

Love me some new tools

@BigDog50001 3 жыл бұрын

Always fun getting new tools lol

@camcam3087 Жыл бұрын

Nice review. Any reason you didn’t go for the equivalent 30 gallon even though the 30 gal says it’s 155psi? For an impact wrench working on suspension is 155psi enough or would the 25gal at 200psi be better? Thanks!

@wayne7886 3 жыл бұрын

Can you point me in the right direction for the parts you used to extend the drain valve on your old harbor freight compressor? Thanks

@BigDog50001 3 жыл бұрын

I had something like this on there (just can't exceed the 175 psi working pressure): amzn.to/3gtYd3F

@wayne7886 3 жыл бұрын

@@BigDog50001 Thank you very much

@fluxcapacitr121 2 жыл бұрын

Thanks for the video. Can you tell me how long it takes to fill from zero to 200 psi? Or how long to recover from 150 to 200psi? Trying to calculate the real world cfm.

@BigDog50001 2 жыл бұрын

I have not timed that stuff but I can tell you that I have beat the crap out of it and it has run everything I have thrown at it from paint sprayers to die grinders to DA sanders. Thanks for the comment!

@nitrooguy 2 жыл бұрын

Great video!!!! How well does it do with a grinder?

@BigDog50001 2 жыл бұрын

It will run continuously but it seems to keep up with grinders and DA sanders. Thanks for the comment!

@user-ib2li2zc1w 3 жыл бұрын

Your harbour freight one is absolutely fine...why waste money on new one

@BigDog50001 3 жыл бұрын

4.0 CFM and 150 PSI was not enough to run certain air tools.

@jonesy4588 2 ай бұрын

work better on 240 v

@a.c.m.e.ink.4568 6 ай бұрын

Hahaha, made in the U.S.A. ! (With global 🌏 components) 🤨😆 'False advertising'. Come on, Dewalt, seriously !!?.

@Grannyhauenstein 5 ай бұрын

Who cares about taking it out of the box? How well does it work with AIR TOOLS? Will it run a cut off wheel or die grinder? If all you're going to do is put 32 psi in your wife's tire or blow dust off your bench, you could have saved about $500

@BigDog50001 4 ай бұрын

Yep, that's all I have done with it....