Your bench rocked! I made 65 of them for my daughters wedding and they worked perfectly for the ceremony and dinner!

I love how easy u guys make woodworking for us beginners. Not everyone is or can be a pro and you tubers forget that. So thank you for keeping it simple.

This is exactly what I was looking for!! I don't know much about woodworking, but you made me feel a little more confident in making a bench. Thank you so much!

the best woodworking channel for beginners hands down.

Took me less than 45 minutes. Used three 2x4"s which I had on hand because I wanted 36" instead of 32" so it would be less cozy. Used a pneumatic framer instead of drill driver and ring shank nails. Very satisfied. Thanks.

Simple build, I built one very similar and used a Kreg jig and pocket holes for the legs so no screws would show. Nice work! 👍🏼

I love your DIY's for many reasons: 1st the aesthetics I love the way they look, clean lines & simplicity of them. 2nd puppies making appearances in videos are always a plus for me! 3rd the ease of making these DIY's. 4th the affordability factor. 5th that they are DIY and when I am finished making one of your projects I can feel good that I have made it myself! Thank you! 👍

Thank you for a short, clear, and useful video!! You guys made me believe in myself and I built my first ever bench! It’s fricken awesome- cheers!!

Love how simple this is. Thanks.

Simple. Easy. And a great way to use up some of the random scraps of 2x4 I have.

So cool! My first home is old so i took apart the back deck and can reuse the 2x4x16s for these with turf grass instead of expensive landscaping love it

Just got done building this Bench Thanks buddy!!!

Perfect design: elegant in its absolute build simplicity, and PERFECT for my needs! THANK YOU!!

Well done. Simple, beautiful and reliable

Great beginner woodworking video! I love how easy the carpentry is. Nice simple tutorial.

Got a new miter saw last night and figured I'd break it in with this. Thanks for sharing! It was so easy and my GF loves it lol

Very nice. Simple. Explained clearly. Thanks very much.

I love your channel! For a super novice like me, your instructions are perfect. I did a practice project using your bench tutorial. Took me a bit longer because my drill died as I did not have it fully charged, I adjusted my bench to 10 ", 15" & 35" because I had a lot of scrap wood to use, I had 1 x 4's so I doubled a few of those and made 4 rows for the seat instead of 3 & I added a 2x4 middle piece for extra stability underneath. Overall easy to adjust your instructions & next I will try your farm house table. Your channel is the best I came across to build an easy peasy bench. I am going to paint mine black. Mine isn't perfect but it was fun to build. Thank you for your channel, hope to see more great projects 😊

Great work

U give complete info exact measurement while making. Excellent work. Thanks

Very cool. Nice and simple! Great job!

Simple, fairly cheap (with current cost of wood), and nice to see a video from you, it has been awhile.

Nice, easy to follow and perfect for those who doesn't have a lot of tools.

Just finished mine , thanks for the video ! A new shower bench for the firehouse

I was looking for a tutorial on how to make a bedside table and I think this is perfect! Gonna make 2 or 3 of these that run the length of the bed against the wall and put some cube shelvings on top!

Thank you..I appreciate your DIY videos.

Beautiful

I made two 44” X 16 3/4” benches for my giant 20” x 16” tall garden pots. I chose to use pressure treated lumber. With the extra top piece, I needed 7, 8’ pieces of lumber. Each bench came in at $52.50. I had screws, outdoor Tightbond, and outdoor stain-sealer for the project already. Your plans were perfect. I did appreciate having a Framer’s square to square up the legs. There is no way I could buy these benches for the amount I spent on them. Lumber costs have gone nuts. I knew it was going to be over a hundred dollars to build these but I was glad I went with your design. It saved a lot of lumber. Thanks again. Cheers!

Beautiful job! What a great idea...Thank you so much for making this video. I wish I had the tools to make one.

Thanks for the tutorial! Just made 2!

Great job with easy instructions, i think i will give it a try. Thanks for sharing.

Thank you enjoy watching your videos

Love watching your diy videos. Thanks so much.

Thanks for complete tutorial, really love this suitable for me beginner

I'm a beginner and I appreciate you guys making it easy for us to build! I'm in the process of building this right now 😀

Awesome! Thanks for the new tutorial! 😊

Love all your videos !! Please never stop making videos

Done! Simple and looks great!

I just made 2 benches for my son! It was so easy!

Love the simple design!

Pretty cool.

Awesome video!!!! Thank you…

Love your ideas

Wonderful

The puppy did it for me...awww 🐕🐶

glad to ¨see¨ you again! great projects! and so easy to follow. Thank you!

Very nice!! I am actually going to do this!! Thank you!!

Thank you for sharing!!

I've been looking for a bench for my tiny bathroom to sit on yet slide my short laundry under! Omg I could make this accommodate changing the dimensions, length and height! Hopefully somewhere can cut the pieces for me. Great video! Thanks.

I'm making this today! *update* I made it and I love it. Thanks for the easy to follow tutorial. I added two extra 32" pieces to the bottom for a second shelf.

Very nice bench! Easy and awesome

Thanks for the great tutorial. I made two of these out of pressured-treated 2 X 4s. They were 44” long and 16 1/2 inches wide. I built them to hold giant planters that were 20” wide and 16” tall. It took 7 8’ boards but I was able to cut and assemble them 5 hours. I’m going to seal them with an outdoor stain. I am very happy with your practical design. Lumber prices in California are still sky-high. I had the screws and the strain. For lumber alone, this bench with four top pieces to accommodate the big pots, cost $105 for two benches. For me it was worth it. I closed my eyes at the Big Box store when I checked out. I guessed it would be over a hundred. It is our new reality. I could never have bought these sturdy benches for $52.50 each. Thanks again for the great plan. Cheers!

So good. Thanks. Gonna try this.

done... poifect... tyfs

Just built one for a piano bench, thanks!!

Good job and build thx for sharing enjoyed it Cheers

LOVE IT

This has been the best demo....instruction.....I know its just a bench..but your way should be universal. Cant wait to see what your other projects are. Also please leave info on background music...so I can play it during construction lol....Thanks again !!!!!!!

Love it. Thanks for sharing!

Really nice work

Muy buen trabajo, y muy fácil de hacer. Muchas Felicidades, sois Geniales .un saludo desde Barcelona Catalonia

Can you do one just like that but with backrest, Thanks . I love your videos

Muito bacana.nota 10.

Love it! Please keep the videos coming

I live in the UK and I made one of these out of scrap timber from previous projects, they were not all of them were same width. However , with an electric plane this was easily sorted. To buy the sawn treated timber still cost £20 roughly 30 dollars. Tip; make sure the timber you buy is straight and not twisted !!!

I’ve made a ton of these from reclaimed 2x6 composite boards off a wood deck

Love it ❤️❤️

Great bench! Awesome seeing you again!! : )

Nice work JP. Funny, dog trick got the same result as Liz did way back, lol!! Nice to see you change stain colors too. I have two of your benches from the old days in my cabin. With the cost of lumber these days, this is a very nice, practical, and relatively inexpensive build. Great job.

Great video!!

Awesome !

Amasing thanks for the video

ty

super

Brilliant!

I made this and it looks awesome! Subscribed for more

I think some skirting would be nice on there to make it stable as well?

Powli machane loved it India from Kerala

You guys rule

I've been wanting to make a bar height small table that's skinny and will fit up against my deck handrail. Just something to set drinks and a plate on while we get in and out of our bar height chairs. Maybe this will work if I make the legs longer and add an extra support in the middle between the legs? I think I'll try it. 😊

Great instructional video, but is the stain you used water resistant for outside use of the bench? Thanks.

dude!!!! much love

Nice bench using supply 2x4’s. However, I would add a third piece between the legs as a brace to give added support to keep the legs from possibly buckling. Just gives better support.

Miss these build videos.

Nice doggie

Making one today, out of treated wood. Should work well for the outdoor smoking area. lol. 🚬

Would it be easier to stain it before you put it together?

this is great for the beginner/novice woodworker...i viewed another DIY bench making and he used 6x6 cedar...really?...cost of a 4x4 cedar post already cost $30 at lowes...this DIY is so much better...thank you...

How did you poly in between the gaps?

Would the bench be sturdy if built longer?

Would this method work if I do it 6 foot long?

Just made one myself

great job as always! Whats the name of the song in the video?

I'm definitely going to have to pre-drill as I'm not strong enough....

What did you sell it for?

So when is the next book coming out? I bought the 1st one!

Wait which stain is this? The link doesn’t show which brand/color

How many screws roughly did u use?

What size of screws please

I had to sub in 2x6s for the seat boards. I didn't have any decent 2x4s.