Make a Mallet From a Pipe Tee

No video

Make a Mallet From a Pipe Tee

Рет қаралды 37,356

Күн бұрын

Make a mallet from an inexpensive 3/4 inch pipe tee fitting. I attach the wooden pieces without first cutting a thread but allow the pipe fitting to cut the threads as the wood is screwed in.
web: www.rickmayotte...
etsy: www.etsy.com/sh...

Пікірлер: 50

@ShimonKupferman 5 жыл бұрын

Dear men, It just occurred to me like that, and then I told myself to search Google and see if more people had thought about it, and so I found your lovely video. You do a really nice and accurate job! Well done! I wish you always success!

@christopheleblanc9175 7 жыл бұрын

great job ,,, i used the same fitting to make a bench vice drive handle ,,,, just sanded off the through treads so it does not wreck the handle ,

@garbern1 6 жыл бұрын

Nice mallet, I'll probably use a brass tee for looks.

@TeddyBear651946 6 жыл бұрын

I don't have a lathe, but I made a mallot like yours except I just whittled all the parts out.

@jewelvibebabo 6 жыл бұрын

Nice crisp video and a lovely and useful end product.Thanks for sharing.

@donfillenworth1721 5 жыл бұрын

Nice! I’m making one with a brass tee. Thanks for sharing

@grahamefreestone5309 5 жыл бұрын

Put lead birdshot or BBs in so it's a deadblow hammer... You probably already know, but the reason he struggled to screw in the ends is because the threads in the pipe are tapered.. It's also a good idea to file 4 slots in the threads to make it like a tapping die. It will make it easier when changing the heads later. 👍

@lilly5758 2 жыл бұрын

So cool, gonna try this

@cyrill8226 Жыл бұрын

1000ème !!! Merci pour les astuces 👍🏻

@jackmaravola2496 8 жыл бұрын

Very nice mallet Rick....! Sure beats hitting metal on metal...!

@JuanRodriguez-jl2dd 3 жыл бұрын

José Ariel Romero de san Miguel de Tucumán Argentina amigo mui interesante sus videos sus trabajos me gusta mucho Boí a copiar después le mando una foto muchas gracias x compartir sus videos sus trabajos. Excelente.me despido con un fuerte abrazo suerte

@KagedCreations08XX 8 жыл бұрын

Nice simple solution!

@heru-deshet359 6 жыл бұрын

Very nice!

@thomasarussellsr 7 жыл бұрын

This is the third video of yours that I've watched, liked and SUBd. Nice mallet.

@almchugh1804 6 жыл бұрын

Another great video

@omniviking 5 жыл бұрын

pipe threads are tapered so they get tighter as you go

@kerrycomstock9220 6 жыл бұрын

Thanks Rick....I really enjoyed the video and your mallet looks fantastic! I will be making one for myself (also want to make a dead blow) Again, thanks!

@738polarbear 7 жыл бұрын

Great idea.

@Terry14.88 6 жыл бұрын

You could also fill the T with lead shot to make a dead blow mallet.

@mikewebster6977 6 жыл бұрын

Don't know why KZfaq would have a problem with this video looked great to me

@josepcb2882 7 жыл бұрын

Genial, mejor que los que venden. saludos desde Barcelona Catalonia

@drivesthecar3247 6 жыл бұрын

It got harder to screw the plugs in because pipe threads have a slight taper.

@edmcwv 3 жыл бұрын

Remember pipe threads are taped, so cut a slight taper on the end of your work.

@krashunburn 8 жыл бұрын

Very cool!

@saurios 8 жыл бұрын

very good job,

@thanas1950 6 жыл бұрын

nice magic job !!!!!

@56CrownVick 8 жыл бұрын

I'll have make one of these.

@krashunburn 8 жыл бұрын

Another thought. Could you put some sand or small lead fishing weights in the head and turn it into a dead-blow mallet, too?

@lisag2771 7 жыл бұрын

Tony Kibbie I thought the same thing.

@thomasarussellsr 7 жыл бұрын

me too, I thought the same thing, or copper BBs, about half to two thirds full in the hollow of the T.

@Taylor-xh8uh 6 жыл бұрын

yes

@r.stobenski3327 7 жыл бұрын

Genius, thanks.

@RickMayotte 7 жыл бұрын

You're Welcome!

@cruzjosegomez9900 7 жыл бұрын

gracias

@bruceowens9081 8 жыл бұрын

nice video

@Rolingmetal 7 жыл бұрын

Love the idea. How's the hammer holding up?

@willwegiel5350 7 жыл бұрын

Good voice clear understanding you. Most make the habit of shop noise over riding the voice. You can alway voice it during editing. thanks.

@RickMayotte 7 жыл бұрын

Glad you liked it and thanks for the kind words!

@dabruscar 6 жыл бұрын

Nice job, what issue could possibly be had with this video? Best of luck

@Taylor-xh8uh 6 жыл бұрын

A galvanized steel tee wouldnt rust

@georgeballentine1045 6 жыл бұрын

I like it going to make me one

@christopheleblanc9175 7 жыл бұрын

pipe treads are tapered slightly , thus your delima

@traditionalarcher5678 7 жыл бұрын

Bees wax also helps to lubricate the wood and does no harm to either the wood or metal. Nice job.

@ChurchClown7 7 жыл бұрын

Traditional Archer Thanks for this tip.

@grahamefreestone5309 5 жыл бұрын

It's also a good idea to file 4 slots in the threads to make it like a tapping die. It will make it easier when changing the heads later.

@leonardburns1780 7 жыл бұрын

very kool thanx for sharing ehhh

@victorlaiviera9683 5 жыл бұрын

What's the best kind of wood to use?

@RickMayotte 5 жыл бұрын

Any hardwood will do. Ash is good or hickory if you're in the south but really any wood will work.

@victorlaiviera9683 5 жыл бұрын

Thanks