I made a classic mini try square, with walnut scrap wood and scrap brass. #makeatool#trysquare#tool
Пікірлер: 67
@dagwood13272 жыл бұрын
Thanks for posting and giving this younger generation another way to see craftsmanship and skill.
@ohasis83312 жыл бұрын
Another sweet little tool for the collection.
@MauricioGoncalves.2 жыл бұрын
Nice!
@mehdiboudoudou6416 Жыл бұрын
Nice job 👍
@norakasa2 жыл бұрын
Fantastic piece of work!
@blankreg4202 жыл бұрын
That is a beautiful piece of work. ☮
@douggilchrist51312 жыл бұрын
Once again you have shown us what a fine toolmaker you are. I love the decorative ogee at the end of the blade. It dresses up the tool to give it a refined look. Nice job!
@YoungJe2 жыл бұрын
Thanks
@bradleytuckwell48542 жыл бұрын
Beautiful work Love the difference with the end sets it off
@dannywilsher41652 жыл бұрын
You are so good that you don't even have to try to make a square 90 degrees!!!
@stewartmcmanus39912 жыл бұрын
What a beautiful little thing, I quite fancy a go at one myself. Thanks, Stewart, south west Australia.
@josephhaddakin70952 жыл бұрын
As always, very nice.
@sapelesteve2 жыл бұрын
Beautiful & exacting work a always Je! 👍👍😉😉
@YoungJe2 жыл бұрын
Thanks
@cariboocustomwoodworks65282 жыл бұрын
Beautiful work.
@yehudaboneh87862 жыл бұрын
Beautiful, Beautiful, and once more....Beautiful
@YoungJe2 жыл бұрын
Thanks
@thxthx9791 Жыл бұрын
You are a great woodworker! Greetings from Germany
@imareare19492 жыл бұрын
Being a two year old hobby enthusiast, at the age of seventy two, attempted step by step and successfuly made a try square, with 2mm brass strip and a piece of purple wood. It took me hours to refine hairline by hairline on 400 and 600 grit to bring it to a nearly perfect ninty degree. Both lines drawn when fliped are acceptably parallel. Thanks to the inspiration I got from you. Sir. Regards and Best Wishes from India.
@johnbell75522 жыл бұрын
A great looking and very useful little tool 👌
@adrianwilliams763 Жыл бұрын
Beautiful
@jessjulian94582 жыл бұрын
Another masterpiece from the master maker, Mr Je.
@YoungJe2 жыл бұрын
Thanks
@VORONM2 жыл бұрын
Perfect tool!!!
@YoungJe2 жыл бұрын
Thanks
@brucesannino61812 жыл бұрын
Gorgeous piece of work. You do have nice hands, I'm surprised. Yes, given the closeness of the table saw blade and the razor knife it is surprising that your skilled hands still work. You made a beautiful and useful tool. Thanks and best regards.
@yeagerxp2 жыл бұрын
Excellent work 👍👍👍 . Thanks for sharing
@troystaten56332 жыл бұрын
Very nice.
@sagguharjit882 жыл бұрын
Dear Sir Really this tri square is classic beautiful and accurate
@jumabujjumabuj78532 жыл бұрын
Hi there, Nice pice of art. Well made as what u usually do 👏👏👏
@conkick11922 жыл бұрын
Hi, Good job, congratulations. God bless you.
@ianvicedomini26482 жыл бұрын
That is a beautiful try square and like many of your other projects, stunning. Great video sir je 👍🏼👍🏼
@YoungJe2 жыл бұрын
Thanks
@mehmethanaydn31132 жыл бұрын
thanks for your handiwork a fine work
@user-uq8ei1nj4p2 жыл бұрын
Шикарный угольник 💪🔥👌👍
@raulsoto20882 жыл бұрын
Increíble trabajo
@ramosoficinadamadeira55102 жыл бұрын
Muito bom 👏👏👏👏👏
@mehdiboudoudou64162 жыл бұрын
Very nice job
@gilnunes14582 жыл бұрын
Perfect
@Colinmac12 жыл бұрын
Very nice
@taejinlee55562 жыл бұрын
언제나 깔끔한 작업, 완성도 높은 작품 예술입니다^^ 추석입니다. 먼 곳이지만 건강하시고 풍요로운 한가위 보내세요~
@YoungJe2 жыл бұрын
감사합니다 추석명절잘보내시길바랍니다 아룰러 짬짬이 목공작업도 하시길,,,,
@mickwilton77502 жыл бұрын
Great craftsmanship
@YoungJe2 жыл бұрын
Thanks
@krenwregget76672 жыл бұрын
Excellent.
@YoungJe2 жыл бұрын
Thanks
@MCsCreations2 жыл бұрын
Beautiful work, my friend! Nicely done! 😃 Stay safe there with your family! 🖖😊
@YoungJe2 жыл бұрын
Thank you I hope you are safe too
@iainthavinthat2 жыл бұрын
perfect
@masterskay_na_naberezhnoi2 жыл бұрын
👏👏
@PeterNetped2 жыл бұрын
Top..
@RSFRLI2 жыл бұрын
👍👏
@hang-on48072 жыл бұрын
멋지네요.
@YoungJe2 жыл бұрын
감사합니다
@davidcotter24702 жыл бұрын
I got the brass a couple of days ago so I’m ready to pull the trigger. I noticed your epoxy was mixed on a Meijer ad. Must be Michigan or at least mid-west.
@pjhalchemy2 жыл бұрын
Beautifully done! Should last a lifetime or two. What is the Ogee at the end of the blade used for/purpose? Thanks for sharing your fine talent and projects!
@YoungJe2 жыл бұрын
it's just design
@luismigueldominguez54872 жыл бұрын
Beautiful like always, but..... In a classical tool I don't lilike the Philips screws.... Is only a personal opinion
@namabuki9252 Жыл бұрын
Объясните пожалуйста, для чего нужен фигурный вырез на конце пера угольника?
@keithspencersr.68062 жыл бұрын
Very nice, is this going to be one of a set?
@YoungJe2 жыл бұрын
I made one with leftover materials.
@BobBlarneystone2 жыл бұрын
A quwstion: Is the end of the blade shaped as a template for a rule joint as is found on dropleaf tables?
@travlinpartner2 жыл бұрын
I love it, thank you for posting. Is there a reason you didn't bring the brass to a brilliant shine ?