I am so happy to hear! 🥹 What kind of fabric did you use? 🤗

@@StudioROSADO oh for now I'm still learning to sew but hope to try your dress once i'm ready for it, immediately added to my wishlist! 🥹❤️

Hello! Oh, with this design is a bit tough! What kind of fabric do you have? Does it have some stretch or it doesn't stretch at all? If it doesn't stretch at all, you definitely should go for size 40, because this dress is fitted around hips. Ideally, I would recommend you to use the layer's function and leave both 36 and 40 visible. For lining this will be very easy: at the top part (bust and waist) follow the lines of size 36 and starting from the waist gradually move to the size 40. So the top part would be 36 and hips part and below 40. With the upper ruffle part it is a bit more tricky. But there as well, at the area above the waist, follow the lines of size 36. And then try to follow the lines of size 40. You should double check the length of Ruffle 1 - it should match your adjusted pattern. The lower ruffles should be cut as size 40. I hope this makes sense! Let me know if I should clarify some parts :)

Ah, and if your fabric does have some stretch (it has elastane), I would consider to risk and simply cut the size 38, but the method I mentioned above is a safer one.

@@StudioROSADO Thank you for your answer! The fabric I have chosen is chiffon so no stretchy at all. I am going to do as you told me print the pattern including the 2 versions (3 with 38 to be sure) and change the patterns according to my mesures. I will make a test version first with the lining dress to see how it fits before doing the ruffled one! Doing so, I think I’ll get the right mesures!

@@unalbaa Amazing, making a sample first is the best decision 👏

Ohh, hope you get through with it ❤️ Here is a short how I created the flower: kzfaq.infoMIlKYJ6SRG0?si=RKFDqqJB_vwhQP8n I freestyled it from the leftover fabric 🙈

I got them in an outlet store that sells a lot of random brands. I have worn them so much that even the label has gone off 😭😂 It wasn't a fancy brand. Looks very easy to DIY. Minimalistic sandals as base, there are 2 rows of tassels and a row of rhinestones literally glued on 🙈 The sandals itself looks something like this: www.amazon.com/Soda-Slippers-Sandals-Slides-Efron-S/dp/B08T84927K/ref=mp_s_a_1_10?crid=6DIRYXJNR09L&keywords=women+slip+on+flat+sandals&qid=1697016446&sprefix=women+slip+on+flat+sandal%2Caps%2C254&sr=8-10

Hi, it will need 2.75 - 3.35m (3 - 3.70 yds) depending on the size. If you choose transparent chiffon fabric, then you will also need lining 1.45 - 2.2m (1.60 - 2.40 yds). You can pick between lining or facing pattern details that are included in the pattern :)

​@@StudioROSADOthank you❤