Hi! In this video I'm making an accurate corner clamp / angle clamp from scrap plywood. Much better than what you get in a shop. allflavorworkshop.com/
► For more details check out my website: allflavorworkshop.com/
► Tutorial and Plans available: allflavorworkshop.com/best-di...
► ALL Woodworking Plans: allflavorworkshop.com/woodwor...
I made a simple corner clamp / angle clamp / 90 degree clamp from plywood. You can easily make corner joints and you will spend almost no money on this jig - besides few screws, nuts and plywood. It is a really nice DIY tool and I recommend for you to make it as well. The result is great.
I started out by designing the corner clamp and cutting the plywood for the jig. I made the corner clamp 15x15 which gives a more solid base for a uniform pressure. Also lets more easily to accommodate wood pieces both vertically and horizontally. To cut the wooden pieces I used few of my jigs I created (circular saw guide, jigsaw cutting station) - both work well. I made a sliding mechanism using a ⌀6 rod with a nut at the end, a T-nut for movement and a wooden knob as a handle (make wooden knobs - • Make Awesome Tiny Knob... ). I fixed all the pieces using wood glue, epoxy and wooden screws.
🛠 Tools and Material (affiliate links):
Circular Saw - amzn.to/4aMD0xg
Jigsaw - amzn.to/3S85cDr
Hand Drill - amzn.to/3HqLEnH
Spring Clamps - amzn.to/41Nuh9D
F-Clamps - amzn.to/48ArzY1
Center Hole Punch - amzn.to/48Fq7mv
Machinist Square - amzn.to/48fT6xw
Speed Square - amzn.to/3RO67Hy
Wood Glue - amzn.to/48ltKhJ
Epoxy - amzn.to/3tJ5R4L
Countersink Drill Bit Set - amzn.to/3vubi80
Forstner bit - 15mm, 20mm - amzn.to/3Hd1aDb
Sandpaper Sheets / Sanding Wheel
Jigsaw Blades - amzn.to/4aXeF83
Threaded rod ø6mm - amzn.to/3TJjwn0
Hardware Assortment Kit - amzn.to/41PodgQ
Birch Plywood 12 mm - amzn.to/3RGfpFq
M6 T-Nuts, Bolts
🛠 All My Tools & Gear:
allflavorworkshop.com/tools-a...
We may earn an affiliate commission when you buy something through our retail links. As an Amazon Associate AllFlavor Workshop earns from qualifying purchases.
► Subscribe To AllFlavor Workshop YT Channel: bit.ly/2T9cIxD
► Sign up for my newsletter: allflavorworkshop.com/mailing...
► Other helpful tutorials:
• How To Make a Circular...
• How To Make a Jigsaw C...
• How To Make a Jigsaw G...
► Follow me on:
Website - allflavorworkshop.com/
Pinterest - / allflavorworkshop
Instagram - / allflavorworkshop
If you have any thoughts or questions, let me know in the comments below and I will get back to you as soon as possible. I am not a professional but I like making something new with my hands. Any suggestion or advice is highly appreciated.
TIMESTAMPS:
00:00 Using the corner clamp
01:07 Cutting the plywood
02:30 Making the corner clamp base
04:38 Making the corner clamp slider
06:22 Making the screw mechanism
08:36 Fixing all the pieces together
10:21 Testing the corner clamp
Thank you all for watching and for your support.
#diytools #clamp #homemadetools #diycraft #clamping #allflavorworkshop
----------------------------------------------------------------------
WARNING:
All information, processes and working procedures provided by AllFlavor Workshop is of a general nature and is furnished only for educational/entertainment purposes only. No information is to be taken as professional advice. You agree that use of this information is at your own risk and hold AllFlavor Workshop harmless from any and all losses, liabilities, injuries or damages resulting from any and all claims.
HAVE FUN BUT ALWAYS KEEP SAFE!
----------------------------------------------------------------------
how to make a corner clamp
how to make a right angle corner clamp
diy corner clamp
diy corner clamp jig
how to make 90 degree angle clamp
how to make 90 degree clamp
90 degree clamp
right angle corner clamp
diytools, diycraft
shop made tools
homemade workshop tools
AllFlavor Workshop