I can confirm it works. As soon as this video finished, i went outside to my CL9 Euro, did the exact same thing and yes it is louder. but only in the higher rev range. Normal cruising sounds the same until you give it the beans. Nice mate, cheers for that. Just gained a Sub

i just did this to my cl7 accord and it’s actually louder haha, what a nice little free mod

I did this on my tsx. It sounded sick. But dude you wont even imagine how much better it sounds with an actual cold air or short ram. The cold air intake that runs all the way into your bumper sounds a lot deeper but the short ram sounds a bit louder. You hear the vtec wayyy more and all my friends think I have an exhaust but I dont lol.

Definitely makes the VTEC sound so much better. Very good if on a budget to make a car sound better! Should do a video on a CL1 Euro R. Or do comparison. Awesome vid!

Airbox drill mod also work really well, although frowned upon by many, I did it on my old accord with a spare airbox and it sounded amazing on cam.

You will actually lose power if you remove the Box. That Box is a Helmholtz resonator that helps smooth the air flow. Spoon always ran the stock airbox on all the CL9 race cars.

Bought my accord with this mod already done to it, saved me time and effort👌

You are making me look for one of these cars as my first car lol. Im in love with Honda Bikes/Cars. That bulletproof and sound eargasm makes you wanna get it as soon as possible... dont know why in my coutry is way harder to find a 2.4 cl9... almost everyone here uses diesel so that cl9 2.2 is more used here, but i hate the smell and the sound or lack there of Diesel exhaust note. Cheers and hope u get a ton of views, if you continue this u gonna get a big channel in due time bro.

the cl9 vids are lit asf bro

I spent $250 for an k&n intake that sounds the same as if i would have done what u did. What a waste of money. Wish i saw this vid before. Great vid man!

I did the resonator delete on my cl7 and it saouds awsome lol❤❤

Awesome video, had me crack up. My CL7 has to sound like that xD

Hi bro. I did the same thing that u did, to my car, cl7 euro r but i noticed fuel consumption had increased without any extra increase in power. So what i did was, i attached back the rubber hose but instead of connecting it back to the long intake hose, i redirect it facing front towards the headlamp. It made the pipe a bit longer so as to correct turbulent flow upon entering the air filter box, or so i thought. Fuel consumption went back to normal, power is there and better breathing till redline. Needs a little adjustment to the box position though. Well, until i find a proper air filter upgrade, things will stay the way it is hehe. Thanks for the idea. Indeed changed how the car responds.

Thanks Man! Nice to see someone do it all correctly and providing trustworthy information!!!!!!!

Kiwicarlife - make sure you have the engine shield on top of the front bumper, so it won't create drag/or get tangled. :D

haha just removed mine after this video and wowwwww the video doesn't do it justice, thanks man :) from Aussie land :)

Thanks for the videos. Because of your last video, I’m not waiting to get my cables and get the reflash done.

I love the face u make whenshifting ! Smiling cheekily as u wait for that oh so sweet shift lol

love your videos keep it up ❤️

Can achieve the same thing by attaching a pod filter, sounds sick

Crackup we used to do this in the 90s to our 1600 dohc civics and crxs ..and yes bro it's easier to just take out the pipe its sounds different ..when you take off slow then blast it after 3000rpm bro you will here it ...love the sound bro nice video brought my teens bro fort street auckland crazy cruising up for drags and car meets from tauranga and the mount ...papakura specialists you guys were insane ..was fricken great the 90s

Done it in Accord VII CM1. At first just deleted short rubber tube and SOUNDS AMAZING :) A bit later removed whole resonator. Thinking about custom cold air intake and a cone filter. Maybe K&N

This clip will forever haunt mark x lovers😂 love Mark x but we all know 300g is not a match for euro maybe supercharge or 3.5g

Enjoying the vids mate. I'm actually still thinking of getting a 4 2 1 header and exhaust lol! Didn't know the ECU flash let you launch the car at 3000rpm. When you do another vid on this accord could you explain the 2 step? Keep up the good work.

That box is a Helmholtz resonator, not sure if you are disturbing the flow of the air entering the throttle body. A dyno test should be performed to test the results.

Add some street fighter cold air in take for what u want for just tweets with map sensor

would swapping the stock airbox for a cone filter be the same thing? notice any change in gas mileage?

SOUNDS GOOD

Loving the videos mate. Keep it up! :)

00:14 My stock CL9 tsx does that as well.. Holds, of rather, doesn't allow you to rev past 3.5k...

Honda: spend engineering time to meticulously counteract the resonance. KZfaq: MAKE YOUR HONDA LOUD BY DELETING IT

K&N Typhoon Kit Performance Sport Air Filter System Version 1 Honda Accord (CN1/CL7/CL9/CM1/CM2/CN2) 2.4i from 2003 till 2008

Great vids! Is this before or after you installed your tonaka exhausts?

hello mate have you just removed a small tube instead of taking the whole air box rez? 1) is that safe that if you drive in some big puddle water wont be suncined into the engine? 2) do i need to take off whole bumber just to get rid of that small tube? thank you

After doing this resonator delete is there anything else I need to do? Don’t want it causing problems in my cl9 your awesome btw 🎉❤

You could just hum racing sounds while you drive.

Hey mate I was just asking if the engine would suck in the hot air under the bonnet itself instead of the cold air if i remove the hose?

Just finished doing this to my euro love it mate, just wondering if this causes any issues with the car?

Will I pass a wof if I take the pipe out between air box and resonantor

Hey can u plz make a video on how to launch

Was confused because I couldn’t find the tube. Turns out the previous owners already did a intake delete 😅

Doing this dose it have any down sides or long term effects

Does this work on the CU2? Excuse my ignorance.

Where did you get your tune from?

Sweet Tik Tok light dude lol

Hey Bro, Hope you read that: i just let repaint my Front bumper of my CL7 and there's ia exact the same difference in the paint, when you take the view from that Position in 2:07. Did you buy it or did you let repaint it? Probably its just a phenomenon to handle with...what about you? Does it disturb you? By the way: amazing accord!!

i have an auto accord euro cl9, do u reckon a manual conversion is worth?

Can this be done without removing the front bumber? ☹️

Does this work on an accord cu 2008

would you be able to do a tutorial for a muffler delete on a CU2?

nice, but im 41, im just gonna leave it stock and quite and still got the power

So it doesn’t harm or affect anything else ? Just remove the extended hose you mean right ?

5 months later sound still the same ?

For free for manual only? my cl9 Is auto and the gearbox is messed up so it makes a weird sound

Can i put it back as easy as i get it out? :O

weird question maybe, but do you get drone doing this?

since u only removed the tube, do u still have to take off the bumper

Would it be the same case as CU2s where you just pull the tube out?

Does this affect fuel mileage?

needs to install any filter ?

Just did this to my Accord CM1 because i got bored ;P

Since you didn't take the box out does that mean you don't need to remove the front bumper to remove that little tube which gives you this sound?

Any noticeable extra fuel consumption afterwards?

Can you reinstall it?

Why take the whole bumper for that rubber tube?

Hoe do you take the tube out without taking either of the airboxes out? Little bit confused...

Is it possible do same thing on a k24z3,, CW2 ?

do you need to replace anything with that tube?

Did your check engine light come on?

Diss anyone know how to fix the clock so it doesn’t keep fading away all the time on the luxury version

Wheel specs?

Could I do the same to my type s my weekend just got exciting

What is the current price of this car in good conditions?

Hey man, what did you say at 3:11? How do you do this "properly"?

Hey guys I have a cl9 and I want to get paddle shifters installed, does anyone know where to get the right paddle shifter kit for it?

Does this work for automatics?

Did this to my wifes 2.4... she's not as impressed as I am 😆

Tik Tok light 🤣🤣

All you did was disconnect your intake from your cluster that's it..... You might as well do what I did and and put on a cold air intake and put on an aftermarket exhaust

If you remove just the rubber between the plastic and the rezo box, the sound exactly the same, and it's just 1 minutes. ;)

Just cut the airbox

Mid renegade 😂

Does this work on an automatic honda accord euro 2004