Make Your Own ADS-B Receiver

Make Your Own ADS-B Receiver | Stratux Build

Рет қаралды 28,216

6 жыл бұрын

In this video I am going to show you how to build your own homebuilt stratus ads-b receiver. The whole project costs around $160 at the time of this video. I will show you what parts to buy and how to put everything together. Enjoy!
Instagram: @thatpilotjo
Stratux Parts:
AHRS Sensor- amzn.to/2DjTU64
Dual Band Antennas- amzn.to/2FUDxyA
Internal GPS Chip- amzn.to/2EUkYZY
Remote Mount GPS- amzn.to/2DQUetW
Pre-Programed SD Card- amzn.to/2FSxuKT (Any other sd card will do.)
Case (Tinted)- amzn.to/2BcT61b
Case (Black)- amzn.to/2BdBkuw
Case (White)- amzn.to/2FTSrVZ
Case (Clear)- amzn.to/2DfPZHl
Gear I Used:
Canon 80D- amzn.to/2DOJeh1
Rode VideoMicro- hamzn.to/2DmNp6y
Vanguard Alta Pro 263AB 100 Aluminum Tripod Kit- amzn.to/2DqN9Tk
Music Credits:
Orbit By WRLD
Cloud 9 By Valesco
Hanakotoba By DAH Trump
With this channel I hope to share my aviation adventures with the world. If you would like to join me subscribe, sit back, and enjoy!

Пікірлер: 76

@lloydmorrison5979 3 жыл бұрын

WOW! Outstanding video. So many high priced units out there, but finally, a Great man like you stands up for those of us that wants to hold on to our hard earned dollars and get the same results. You Rock!

@ALSNewsNow 2 жыл бұрын

Damn man, this is a super clean install, best I've seen to explain how to do a whole pi setup

@stevehenderson671 Жыл бұрын

Just finished mine today. Thanks!

@PeterPasieka 2 жыл бұрын

Nicely done. Love the case at the end.

@midwestoffgrid9190 6 жыл бұрын

Nice job! New subscriber too. I’ve seen many other videos and by far yours is much better showing a step by step explanation. You should do another software video and possibly an in flight video showing some of the integration with apps like ForeFlight. Take care. Nick

@greer2ed 6 жыл бұрын

Would definitely like to see the software side. Thanks for taking the time to make this vid.

@thatpilotjo2622 6 жыл бұрын

Working on the video now. Stay tuned!

@motodork Жыл бұрын

Absolutely fantastic instructional video.

@joshuajohnson2154 Жыл бұрын

Great video! You got me as a subscriber..... I love how simple you kept it with no fluff. Any chance you have another source for the AHRS? I'm looking forward to seeing your pi software video as well.

@bshuman44 5 жыл бұрын

Great video, thank you

@bogdankucherov8722 2 жыл бұрын

Thanks, great video!

@bennietipton2820 4 жыл бұрын

Very cool man

@artemisdefcon 4 жыл бұрын

Best job.

@kylekendall1587 5 жыл бұрын

Great video! i have just started looking at building my own Stratux, and your video was the clearest! do you have a video of it in operation with Foreflight?

@mehtkab 3 жыл бұрын

Did you ever get an answer to this? My hunch is that you don't need the GPS dongle if using Foreflight on an iPad. Is that your experience?

@kylekendall1587 3 жыл бұрын

@@mehtkab yes it was, after building it and getting is connected with my ipad it works great! all for a fraction of the cost.

@boeing747200lr 3 жыл бұрын

Awesome!

@DirtNerds 4 жыл бұрын

you should use both fans, the make solder-able usb that fits fine

@und3rgr0undfr34k 4 жыл бұрын

awesome!

@egothrasher 5 жыл бұрын

Love the video, very clear and informative. Will be building my own soon. Could you provide a link as to which Bovke Case you used, as it does fit perfectly.

@joshuasmith4949 4 жыл бұрын

can you tag a link for the black case (looks like a camera case) that you store the stratux in?

@williammoney962 6 жыл бұрын

Howdy. Great video. I learned a lot from your tutorial. After building this neat piece of equipment what software should be used with it to bring it fully operational?

@thatpilotjo2622 6 жыл бұрын

I would recommend downloading the software from the Stratux website and using that. If you are using Foreflight and want the ahrs to work(but glitchy) there is a dangerzone build you can download from github.

@zoozolplexOne Жыл бұрын

cool !!!

@jerryyang8046 3 жыл бұрын

Looks like you didn’t link the raspberry pie motherboard link. Other than that it’s a great video! Btw do I need to buy heat sink separately or it comes with the motherboard?

@birdwing98 5 жыл бұрын

7:54 Color code the antennas with some tape and put color codes on the case. Please do not play music while you are talking. Great build and thanks for sharing.

@richiek7504 6 жыл бұрын

Does the version downloaded from stratux has the fix for ahrs when using foreflight? Also what's the latest version of stratux? How does the internal gps work? I've read various comments about it not working and folks having to make the switch to the external gps. Awesome tutorial

@thatpilotjo2622 6 жыл бұрын

Check out my new video!

@louissanderson719 Жыл бұрын

Hey Joe! Where you at with your flying now?

@MannyGonzalez 5 жыл бұрын

Thank you for the detailed video. Can you link to the Battery Pack and Cable that you purchased? I know I can get anythign similar but wanted to compare to your choices. Thank you

@thatpilotjo2622 5 жыл бұрын

I used the Bainoe 1200 mAh battery. I got it on Amazon, but I don’t think it’s available anymore. www.amazon.com/Bainoe-Portable-Charger12000mah-Power-Charge/dp/B074YW6SF2

@missionpilot9291 5 жыл бұрын

What about a micro usb to usb power cord and continuously power off of the Aircraft power? Do you have to use the battery? @@thatpilotjo2622

@thatpilotjo2622 5 жыл бұрын

You don’t have to use a battery. You can plug it into the plane or a battery.

@62heliman 4 ай бұрын

how did you take the case off the frequency boards?

@ricardoimpagliozza4056 6 ай бұрын

Can you ad the link for the battery pack and cable please

@lloydmorrison5979 3 жыл бұрын

When installing the Stratux and entering software, can you program your tail number or N number to be displayed ?

@thatpilotjo2622 2 жыл бұрын

No, the system is adsb in only. It does not broadcast your location.

@hoverjocki 5 жыл бұрын

can you use raspberry pi 4?

@jeromebarns6151 5 жыл бұрын

You mentioned in your video that you were going to provide links for purchasing the hardware required for the Stratux build. However I'm not seeing it below. Can you please oblige, thanks. Luv your work by the way :-)

@thatpilotjo2622 5 жыл бұрын

The links are in the description.

@Lt_Tragg Жыл бұрын

My build stopped working after a few years recently. No longer receives ADSB towers. GPS still works though. Either or both of the antennas went dead is my guess. I have no idea how to go about troubleshooting. Oh well. A lot of nice parts someone could probably use. Thinking I'll move on to a Stratus or Ping and toss this one in the dead bin.

@raider6511 4 жыл бұрын

So how do you connect it to the iPAD and see everything?? I'm new to this so don't know how to do it. Your list didn't include the board.

@thatpilotjo2622 4 жыл бұрын

It connects via WiFi. & I used a raspberry pi 3, you can get one anywhere.

@Detox5150 4 жыл бұрын

Nice tutorial. I built one a few years ago, but now I’m exploring travel case and battery options. Could you link the ones you used? Those are the only 2 things that aren’t in the description. Thanks man. Happy flying.

@OfficialChrisBreezy 2 жыл бұрын

Does this still work?

@FoysalChowdhuryGoni 6 жыл бұрын

Here is no technical data dBm dBi measure requests can you answer here Thank you so much

@thatpilotjo2622 6 жыл бұрын

I’m not sure what you mean

@missionpilot9291 5 жыл бұрын

Im looking to the Raspberry PI link?

@thatpilotjo2622 5 жыл бұрын

I just used a raspberry pi 3. You can get one from anywhere (amazon, eBay, Newegg...)

@derekgray1633 Жыл бұрын

The rasberi pie has become so expensive that building this costs 300$ and buying a complete unit ready to run is 399$ it’s almost worth it to get the pre made kit if your spending 3/4 of the price to make your own

@Barrometre 2 жыл бұрын

BARROMETRE1: Can this be used to have a METAR & TAF reports without being on the cockpit of a plane?

@thatpilotjo2622 2 жыл бұрын

Yes, as long as you’re in range of an ADSB tower. You can also get that info from the internet.

@Barrometre 2 жыл бұрын

@@thatpilotjo2622 Many thanks!

@Barrometre 2 жыл бұрын

I just received the box Kit like the one you (brown color). To my great surprise it does not come with the green Board (is it Raspberry Pi?). Can you tell me the board I need to purchase in addition to make this work?

@thatpilotjo2622 2 жыл бұрын

You’ll need a raspberry pi 3 or 3b+. Checkout the build list at stratux.me

@MrGolakechelan 2 жыл бұрын

How do I get the data out of this unit into my Phone or tablet so I can read the data ?

@thatpilotjo2622 2 жыл бұрын

The unit should broadcast a WiFi signal. Connect your phone to it and put in the unit’s ip address to get to the system settings.

@MrGolakechelan 2 жыл бұрын

Is there a special app that I need on my phone to interact with this device?

@vinsavi 5 жыл бұрын

What if the red light does not stop flashing?

@avflyguy Жыл бұрын

reflash SD card

@porcusdiu 2 жыл бұрын

I don't understand: where I see other airplane around me?! Need a LCD screen, but in this video is not present. Why? Help me, please..

@avflyguy Жыл бұрын

You'll need your favorite navigation platform.. Garmin, Uvonix, iFlyGPS and several others. Once done you connect via wi-fi and you'll see traffic around you as well a receive weather, Metars, Pireps, weather radar overlay and more.

@porcusdiu Жыл бұрын

@@avflyguy many thanks.. :-)

@helnoSA 6 жыл бұрын

Might want to put that battery on the bottom if you want the GPS to work.

@thatpilotjo2622 6 жыл бұрын

With the way the case is made I have to put it there if I want to use the mounting options on the back, and keep the battery on the unit. But the GPS works perfectly fine still.

@helnoSA 6 жыл бұрын

I'll never quite figure out why Summitlink made it so that it mounts with the GPS facing in rather than out. Then again they obviously did not test the V2 with the GPYes since it cannot be plugged in at the same time as the second fan.

@thatpilotjo2622 6 жыл бұрын

I know that's so annoying. It can get pretty hot where I am in the summer, and I don't want it to overheat.

@helnoSA 6 жыл бұрын

Any particular reason you bought that case in the first place? A lot of effort was put into the official case to ensure that it had adequate cooling. www.amazon.com/gp/product/B072ND582W

@thatpilotjo2622 6 жыл бұрын

I wanted the tinted color and the option to mount the antennas on the side if I wanted. Do you have a Stratux?

@ramjet4025 3 жыл бұрын

Another next to useless ADSB video that fails to even mention the file that is being installed by Etcher.

@avflyguy Жыл бұрын

In his video, he shows just downloading the .ZIP file. That file must be extracted so that there is an .IMG file - Then run the .IMG file through etcher.