Make Your Own Automatic Sanitizer Dispenser (No Programming Needed!)

Рет қаралды 49,582

Күн бұрын

Hello guys, Welcome to Robocraze! In this video, we will show you how to make an automatic hand sanitiser dispenser without programming. You can create a touch-free dispenser with some basic materials and a little time for easy hand cleaning. we will go through the materials and step-by-step process, with helpful tips for efficiency. It's a fun and practical DIY project that anyone can do, so join us and take the first step towards a healthier, germ-free lifestyle. Watch until the end for all the details.
Don't forget to like and subscribe for more great content like this! And if you have any questions or comments, feel free to leave them down below. Thanks for watching!
►Get the product here: www.robocraze.com/diy-automat...
►𝑭𝒐𝒓 𝒎𝒐𝒓𝒆 𝒊𝒏𝒇𝒐𝒓𝒎𝒂𝒕𝒊𝒐𝒏 𝒂𝒏𝒅 𝒄𝒊𝒓𝒄𝒖𝒊𝒕 𝒅𝒊𝒂𝒈𝒓𝒂𝒎, 𝒄𝒉𝒆𝒄𝒌 𝒐𝒖𝒕 𝒐𝒖𝒓 𝒃𝒍𝒐𝒈 𝒐𝒏 𝒕𝒉𝒆 𝒍𝒊𝒏𝒌 𝒈𝒊𝒗𝒆𝒏 𝒃𝒆𝒍𝒐𝒘:
www.robocraze.com/blog/post/a...
Check out our informative blogs about Popular Electronics: robocraze.com/blogs/post
Check out our Website for awesome deals on a wide range of electronic products and collections: robocraze.com/collections
Check out our video playlist about a few amazing project videos: • Make Your Own Automati...
Due to the variations in the types of relays and sensors available, you might find that the system responds in a manner that is opposite to what is desire. For example, if the motor stops when you place your hand and starts when you remove it, it probably means that either the proximity sensor is active low instead of high, or the relay is trigger low instead of high. For either of these scenarios, the fix is simple. Just swap the usage of NC and NO pins. So if you are using NO pin as instructed by the video, move it to the NC pin and vice versa. The COM pin must remain unchanged.
If the motor does not stop regardless of whether a hand is present in front of the sensor or not, check the calibration of the proximity sensor potentiometer. Ensure that the output of the proximity sensor changes when a hand is brought near it and taken away and that the relay switches on giving high and low input. Malfunction of any of these two components may result in the motor either not starting up or not stopping.
|| Subscribe our Channel for More Updates & Click on the Bell icon for Notification ||
►Subscribe To Our KZfaq Channel : / robocraze
►Follow Us On Facebook To Know About Amazing Discounts :
/ robocrazeindia
►Follow Us On Instagram To Know About Our Latest Discounts: / robocraze
Chapters
0:00 Intro
0:33 Components required
1:09 Getting started
7:19 Working
8:47 Outro
#automatic #Automaticsanitizer #sanitizer #sanitizerdispenser #diysanitizer #diy #Robocraze #automaticalcoholhandsanitizerdispenser #automatichandsanitizer #automaticsanitizerdispenser #DIY #SanitizerDispenser #AutomaticDispenser #NoProgramming #EasyDIY #HandSanitizer #CleanHands

Пікірлер: 143

@saakshibagrodia3824 4 жыл бұрын

This is so cool. Explained really well. Thanks! :)

@Robocraze 4 жыл бұрын

Hi Saakshi, We are glad you liked this tutorial. Do subscribe for more such cool projects :)

@AnjaneyaAgarwal 3 жыл бұрын

Such a good project!!

@Robocraze 3 жыл бұрын

Thank you, we are glad you enjoyed the video. Please like and subscribe for more such content.

@cristiandavidcalle6178 2 жыл бұрын

Gracias amigo un suscriptor más ..

@njongnyanadiakeng1092 2 жыл бұрын

Thanks.

@Robocraze 2 жыл бұрын

You're welcome

@mdslcreations1601 3 жыл бұрын

Superb sir

@Robocraze 3 жыл бұрын

We are glad you enjoyed this video. Do check out the other videos on our channel for more cool ideas! :)

@ankurjain444 2 жыл бұрын

Nicely explained bro

@Robocraze 2 жыл бұрын

Thank you, we are glad the tutorial was helpful to you :)

@infinityexplorerram 3 жыл бұрын

Cool man

@Robocraze 3 жыл бұрын

Thank you, we are glad you enjoyed the video. Please like and subscribe for more such content.

@infotainment1296 3 жыл бұрын

You made a mistake in connecting the pump to relay, you connected it to NC then pump stops only when we show our hands to ir sensor. I know you realized it and changed it to NO but why don't you mention it in the video?

@Robocraze 3 жыл бұрын

Hi, Thank you for bringing this to our notice. There is a minor connection correction performed in the video. However the lable on screen at 6:05 indicates the correct connnections to be made which should be followed.

@mrinmoychoudhury5915 3 жыл бұрын

Can the IR sensor handel 12v 500ma voltage constant from an adaptor? I wonder because the load is low.

@Robocraze 3 жыл бұрын

Hi, The adapter being used in the video is a 5v 1A adapter. A 12v adapter will not work since the IR module requires 5v VCC.

@riddhishakya7791 2 жыл бұрын

I'm getting a problem pls help mine relaymodules both light glows but light on ir sensor doesn't glows pls help

@helalali6555 3 жыл бұрын

Awesome Awesome Awesome

@Robocraze 3 жыл бұрын

Thank you, we are happy that you liked the video. Please like and subscribe to not miss our new videos.

@helalali6555 3 жыл бұрын

@@Robocraze sir it will cheaper than arduino can u please answer?

@Robocraze 3 жыл бұрын

@@helalali6555 Since there is the addition of Arduino to the existing components in the kit, it will not be cheaper to use Arduino, however, if your application has additional requirements such as use of more sensors, LEDs, actuators etc. then it would be advisable to use an Arduino since it is easier to control those using a microcontroller

@rajattripathi362 3 жыл бұрын

What changes will I have to make if I want to add a solenoid (SV) please tell

@Robocraze 3 жыл бұрын

It depends on the solenoid pinout. If the solenoid can be triggered using a 5V signal, then the same circuit can be used and the relay can be replaced with solenoid

@kanna7013 2 жыл бұрын

This video really helps, thanks! I made this but whenever I try to put the battery, it automatically starts pumping; however after that it functions normally. Can you tell me what the problem is?

@Thedcmaker371 2 жыл бұрын

Same problem

@Robocraze 11 ай бұрын

Hello, It could be happening because any obstacle is getting detected while you put the battery.

@hiimbright2246 2 жыл бұрын

Is it okay to use 6v adapter but the single jumper delay module is 5v?

@Robocraze 2 жыл бұрын

It is not recommended to use a source voltage higher than the component's voltage rating as it might end up damaging the device

@mohitbhama5448 3 жыл бұрын

What kind of relay module you are using in your video?

@Robocraze 3 жыл бұрын

Hi Amatya, In this video, a regular 5v relay module has been used.

@sajidabegum2891 2 жыл бұрын

Sir, how long will it take for the product to be delivered if we order the kit which is mentioned in the video description???

@Robocraze 2 жыл бұрын

We ship all orders within 1 Working Day.

@promazing602 2 жыл бұрын

Sir Mera ir sensor ki red light glow ho rahi hai par jab me hat aage le ke ja raha hu tho work nahi ho raha hai red light hi hai. Mene ir sensor ke blue part ke up me gumaya plz hel

@silugr Жыл бұрын

Can I do this with a 12v relay ??

@Robocraze Жыл бұрын

You can, but ensure all your other components are also rated for 12V

@sluxtpr1 3 жыл бұрын

Very nicely done 😊👍

@Robocraze 3 жыл бұрын

Thank you, we are glad you enjoyed the video.

@helalali6555 3 жыл бұрын

Bro i want to know how its costed to you?? And 1 more questions if i use arduino which would be cost effective?

@Robocraze 3 жыл бұрын

Hi, You can find the kit for this project here: www.robocraze.com/diy-automatic-sanitizer-dispenser-kit Using Arduino depends on your requirement and budget. This dispenser can be made without using Arduino as demonstrated in this video. However, if you wish to modify the system to include more sensors, LED's or any other peripheral which requires a microcontroller, then you could use an Arduino since its a low-cost microcontroller.

@dibyojyotibhattacherjee4279 Жыл бұрын

How did u open up the middle of the wire?

@Robocraze Жыл бұрын

You can use a wire stripper or wire cutter to strip out the insulation

@mohitgoutam27 2 жыл бұрын

Sir you are going great but you must create a circuit diagram so that if someone didn't understand your language or connections in the video so he/she can refer the circuit diagram for their project Thank you ❤️

@Robocraze 2 жыл бұрын

Please check the video description for a link to the blog post containing all the necessary circuit diagrams

@beemodise 3 жыл бұрын

Hi there, if I was to add a switch to the circuit to turn it on and off. Where would I add the cables?

@Robocraze 3 жыл бұрын

Hi, If you wish to use a switch as a master override to turn the dispenser off, you can add it between the VCC (red wire) from the adapter and the VCC junction that goes to the motor and sensor.

@beemodise 3 жыл бұрын

Perfect, thank you so much.

@Robocraze 3 жыл бұрын

We are glad this helped you. Do leave a like and subscribe to get more such content :)

@rahulmasali8560 4 жыл бұрын

How to set particular quantity to dispense?

@Robocraze 4 жыл бұрын

You will need a timer module for this. Check this video kzfaq.info/get/bejne/gqiRmdWLyZy0kqs.html

@fairose1052 2 жыл бұрын

With out motor relay is working on and off but if connet motor close the sensor not off if remove hand why bro

@Robocraze 9 ай бұрын

Hello, There might be some issue with the connection. The positive pin of motor or pump is connected with the NO pin of the Relay and the negative pin of the motor or pump is connected with the negative pin of the DC jack.

@ajfoods1446 2 жыл бұрын

How many volt is the adapter Is it work with phone charger

@Robocraze 2 жыл бұрын

Regualr 5V 1A adaptor will work. Yes, most phone chargers will work, but do note that you will need to cut the wires

@ajfoods1446 2 жыл бұрын

@@Robocraze thank you ok

@navyanair5567 2 жыл бұрын

Sir please explain how the adaptor is connected in the end...my project is incomplete...help me out please

@Robocraze 2 жыл бұрын

The adapter is connected to the jack splitter. GND is taken as common and the VCC is passed through the relay to control on/off.

@arsalankhan5868 3 жыл бұрын

Sir mainay battery use kari iski light nay battery khatum kerdi led light was continuously on.

@Robocraze 3 жыл бұрын

Hi, The LEDs can be desoldered to reduce power consumption or can be supplied with power from an adapter.

@nitinbhargav 3 жыл бұрын

Friend my project is going just opposite, when objects comes in contact with sensor then motor stopes and when the object removed the motor start working

@Robocraze 3 жыл бұрын

Hi Nitin, Please check the second last paragraoh in the video description. If the system is behaving differently, the steps given in the description may help you.

@s.m.i.e3283 3 жыл бұрын

What's the input power supply

@Robocraze 3 жыл бұрын

Hi, In the video, we have used a 5v 1A DC adapter.

@fairose1052 2 жыл бұрын

When connect the motor always on.. If not connect motor relay working good why

@Robocraze 2 жыл бұрын

Hi, we will need more information to help you out with your issue

@ckpraveen9150 2 жыл бұрын

I am 3rd year b.tech student I selected this project as mini project But for me the relay is not triggering when hand is placed in front of ir sensor. Please tell me what will be the issue.

@Robocraze 2 жыл бұрын

The issue can vary from relay module not working to connections being incorrect. We will need more information to help you out better

@ajithaju7255 2 жыл бұрын

How to add cut off in this??

@Robocraze 2 жыл бұрын

It automatically cuts the circuit off using relay when the hand is not in front of the proximity sensor

@shortvideosstatus5181 Жыл бұрын

Sir mera ak project hai lakin humse ir sensor or realy se motar nahi chal raha hai please help me

@Robocraze Жыл бұрын

Hello, please raise a ticket on support.robocraze.com with your detailed query and images, and our team will get back to you at the soonest!

@edutech-bio8946 3 жыл бұрын

Is soldering required?

@Robocraze 2 жыл бұрын

Soldering is not required for this project

@sadhansaha7147 2 жыл бұрын

Can i connect 9volt battery

@Robocraze 2 жыл бұрын

Yes! As long as all your parts work with 9V safely (the motor, relay, IR module). You should be good to go. Otherwise you will need a way to step down 9V to 5V using buck modules

@paulrahul9366 2 жыл бұрын

Sir can i get the circuit diagram of the connection ?

@Robocraze 2 жыл бұрын

Please check the description where we have linked the blog post with circuit diagram on our website

@sacspune 4 жыл бұрын

How do u get active high output on IR module? All Chinese modules have active low o/p. They give high when no obstacle and low when detected obstacle. Something is wrong or missing!

@Robocraze 4 жыл бұрын

Hi, The sensor that ships with the kit is active high, hence it can be used in the configuration as shown. If you happen to have an active low sensor, you could work around this issue by connecting your pump to the NC pin of the relay.

@iocareteam8529 4 жыл бұрын

One more thing. Relay has arcing issue which can be very dangerous in case of alcohol based sanitizer. It can trigger an explosion.

@scubecoach4032 3 жыл бұрын

@@Robocraze can you help with this wiring diagram of connecting motor to NC

@Robocraze 3 жыл бұрын

To clarify the circuit once, this setup requires 4 sets of connections. These are as follow: 1. VCC from adapter -> VCC of relay module, VCC of proximity sensor and NO (normally open) pin of relay 2. GND from adapter -> GND of relay module, GND of proximity sensor and GND of pump motor 3. Output of proximity sensor -> input of relay module 4. Positive terminal of pump motor -> COM pin of relay module For more information refer our blog: www.robocraze.com/blog/post/automatic-sanitiser-dispenser

@prabhatsharma8958 3 жыл бұрын

Can I use 9V battery instead of DC connector

@Robocraze 3 жыл бұрын

Hi Prabhat, The adapter and relay used are 5 volts, hence a 9v battery cannot be used. You may howver use a voltage regulator to step down the 9v to 5v. A circuit built using the 7805 voltage regulator may help you.

@prabhatsharma8958 3 жыл бұрын

@@Robocraze Thx for the Help.

@Robocraze 3 жыл бұрын

@@prabhatsharma8958 Glad we could help you. Do drop a like and subscribe and stay tuned for more cool projects :)

@syedmustahsan 4 жыл бұрын

i buyed this project on ur website i m not able to understand the wiring can u plz give me WIRING DIAGRAM... REGARDS

@Robocraze 4 жыл бұрын

Hi Syed, Please find our blog in the link given below. Here you can find the circuit diagram along with additional information about this build. www.robocraze.com/blog/post/automatic-sanitiser-dispenser

@choreographeroftmkoc6696 4 жыл бұрын

Hello its not working dude all 2 lights of relay is glowing when pull wire from relay and then motor is working without sensor

@Robocraze 3 жыл бұрын

Hi, have you tuned the IR sensor, it has a small potentiometer on top that can be used for tuning , ensure that it turn on only when you get your hand close to it

@choreographeroftmkoc6696 3 жыл бұрын

Robocraze yo now it’s working

@sscreator7203 3 жыл бұрын

You can give the diagrame?It would be usefull.Please help me,

@Robocraze 3 жыл бұрын

Please find the connection diagram in the blog here: robocraze.com/blog/post/automatic-sanitiser-dispenser

@sscreator7203 3 жыл бұрын

Ok bro I trying this,Thank you bro❤

@aarushikasundan2567 3 жыл бұрын

5v and single ampere means 5v& 1 ampere ...and also can we use any phone charger as adapter???

@Robocraze 3 жыл бұрын

Yes, a phone charger can be used as a power supply if it meets the required rating of 5V 1A. However, exercise extreme caution while making connections so as to not cause any damage to the phone charger.

@tanuchoudharypw6780 3 жыл бұрын

Sensor is not working🙁 Plz help

@Robocraze 3 жыл бұрын

Hi, which sensor are you talking about? If you purchased from Robocraze, please contact tech@robocraze.com to help you with your project

@tanuchoudharypw6780 3 жыл бұрын

@@Robocraze I've purchased from Amazon. Earlier I was working fine but now it has stopped working

@ayasyamamidala8106 3 жыл бұрын

Can we use ultrasonic sensor In the place of IR sensor

@Robocraze 3 жыл бұрын

You can use ultrasonic sensor if you have a controller such as the Arduino. Without controller, it is not really possible as the a microcontroller is required to calculate the distance between pulses emitted by the sensor itself

@dhruvumraliya2645 2 жыл бұрын

Mera ir sensor on hi nahi hora Same connection hi mene kiye he 😔

@Robocraze Жыл бұрын

If the sensor have a diode(LED) on the module then you can directly check its working just by giving power supply and checking if the LED status changes according to your requirements.

@SarmadRazaOfficial 3 жыл бұрын

Motor pump not work

@Robocraze 3 жыл бұрын

Hi, Please try powering your pump motor directly to see if it is faulty or not. If the motor powers on when conected to supply directly, there may be a problem with your connections.

@hashadshinde2493 Жыл бұрын

Sensor ko adjust how to

@Robocraze Жыл бұрын

Sensitivity can be adjusted with the onboard potentiometer

@no_matters1 Жыл бұрын

But.... Sir in last u cut the video....? .... Bcaz there is fault in your connection.... Thus why....The relay Start in low signal.... Pls sir make a full live video without any editing.... Otherwise... Ur video explanation is very... Gud... But my Project is not working with this circuit....

@Robocraze 10 ай бұрын

"Hello, We appreciate your feedback, and we will certainly take your input into account to enhance the quality of our upcoming videos. Thank you!"

@reetanjalidash6288 3 жыл бұрын

I want an free sample from you please give a link.

@Robocraze 3 жыл бұрын

We dont give free samples, but you can use the coupons on our website to avail discounts. robocraze.com/deals/ For any further asssitanace, please reach out to us via website chat.

@nalingupta7712 3 жыл бұрын

Relay nahi lagate fir bhi kaam karta hai IR Sensor, fir relay kyo lagaya aap ne ?

@Robocraze 3 жыл бұрын

Hi, The relay is to control the power to the pump. We need the pump to turn on and off based on the output of the proximity sensor. The output of the proximity sensor is connected to the input of the relay. The output of the proximity sensor in itself is insufficient to drive the pump.

@beenasharma5043 4 жыл бұрын

not working please help

@Robocraze 4 жыл бұрын

Hi Beena, Please find our blog in the link given below. Here you can find the circuit diagram along with additional information about this build. www.robocraze.com/blog/post/automatic-sanitiser-dispenser If you are facing any other issues with the circuit, do let us know.

@snehparekh6035 4 жыл бұрын

Not working, share your complete circuit diagrams

@Robocraze 4 жыл бұрын

Hi Sneh, Please find our blog in the link given below. Here you can find the circuit diagram along with additional information about this build. www.robocraze.com/blog/post/automatic-sanitiser-dispenser

@kailashjat4209 3 жыл бұрын

Mere sensor ki dono lights jal rahi hai.... Aur current pass karte hai toh bina kuch saamne laye hi pani aana start ho jaata hai... PLZ HELP ME 😩😩

@Robocraze 3 жыл бұрын

Hi, Please check the steps given in the description of this video to ensure your potentiometer settings and connections are correct. We have discussed these issues in the description.

@bhavyagoel6428 3 жыл бұрын

Every thing is good but connections are very confusing.

@Robocraze 3 жыл бұрын

Hi, To clarify the circuit once, this setup requires 4 sets of connections. These are as follow: 1. VCC from adapter -> VCC of relay module, VCC of proximity sensor and NO (normally open) pin of relay 2. GND from adapter -> GND of relay module, GND of proximity sensor and GND of pump motor 3. Output of proximity sensor -> input of relay module 4. Positive terminal of pump motor -> COM pin of relay module Hope this clears things up For more information refer to our blog: www.robocraze.com/blog/post/automatic-sanitiser-dispenser

@bhavyagoel6428 3 жыл бұрын

@@Robocraze Thank you very much for solving my issue and replying fast 🙏

@Robocraze 3 жыл бұрын

We are glad this helped you. Do leave a like and subscribe to get more such content :)

@shortvideosstatus5181 Жыл бұрын

Please sir help kijye 😭😭😭

@Robocraze 11 ай бұрын

Hello, please raise a ticket on support.robocraze.com with your detailed query and images, and our team will get back to you at the soonest!

@encrtm 3 жыл бұрын

Bhai hindi m kyu nhi bolte hooo...circuit diagram bhi show karte

@Robocraze 3 жыл бұрын

Hi, Please check timestamp 6:05 for motor connections. They are mentioned on the screen.

@julianjulian2957 3 жыл бұрын

you do know that sanitizer is flammable, right?

@Robocraze 3 жыл бұрын

The sanitiser itself is not in contact with any of the electrical components apart from the pump - which is designed to be submersible.

@julianjulian2957 3 жыл бұрын

@@Robocraze yes, they do. That kind of diaphragm pump is notorious for being leaks. Once it does, it can cause somebody their life.

@julianjulian2957 3 жыл бұрын

@@Robocraze i hope you understand what i was saying about LEAK. That cheap diaphragm pump is NOTORIOUS for leaking. can you comprehend my statement?

@ifhami4122 2 жыл бұрын

this is just a small project so daddy chill

@julianjulian2957 2 жыл бұрын

@@ifhami4122 small project that can cost someone's their life? Are you nuts?

@reetanjalidash6288 3 жыл бұрын

Please give me the kit for free 😭😭😭

@Robocraze 3 жыл бұрын

Wish we could do that. But we have a lot of coupons available. Check out on www.robocraze.com

@reetanjalidash6288 3 жыл бұрын

Please give me a coupon link

@Robocraze 3 жыл бұрын

@@reetanjalidash6288 robocraze.com/deals/

@reetanjalidash6288 3 жыл бұрын

I want the automatic sanitizer kit for free