Liked for the reverse osmosis water! Good to see someone who cares about ppl's health.

How do you use them... after removing from the freezer... do you run water over the bucket to thaw? Or let them just set out a little bit? Im concerened of cracking the mold? Ty

I seen this video several times! I tried many molds but all seem to crack! I finally found molds that work and i now have over 80 block on hand everyday! Its beautiful! This video inspired me!

Hi... How do You prevent ice from melting? Like You know i tried freezing and it melts very fast when i shaved it? Like i didnt even get any pieces to prepare shaved ice recipe. Should i add some ingredient to water before freezing?

Have you ever had trouble with your containers beveling out at the bottom when you freeze them stacked on top of each other? We've been having to freeze ours in single layers to avoid this but I'd love to solve that problem so we can increase our capacity! Thanks!

How many 16oz cup snow cones would the 20-40 ice blocks make? Give or take?

Thank you for sharing with us how to make block ice. I noticed that you have 3 compartment sink. Could you share how to sanitize used plastic syrup bottles using the 3 compartment sink? Thank you in advance for your help.

What is your lead time on freezing. I am having the hardest time keeping up. Any strategy to getting them to freeze faster?

hey do you find that RO water is harder on the blades at all?

Hello, do you use the 7 inch round ice molds?

How do you keep you blocks from busting or cracking

Great Video! Is there a way you can post a link to these exact containers from Amazon, as far as the correct dimensions? I know you said you get them locally, but want to make sure to get the correct ones. Mahalo 🤙🏽

What is the best container to use that won't beval or crack

How many shaved ice you can do with 1 block ?

Thank you for a great video.. so my blocks are uneven and cracked. wondering if it is because the freezer is too cold? If I try to chip away to even the block out the whole block just comes apart. Any suggestions?

At what temperature do you keep your freezer

have many cups of shaved ice does one block make on average? P.S. where do you find those containers at?

Can I ask where do you get those containers?

how do you prevent these blocks from melting when you close your food truck???

How do you get them from not cracking

Where do you buy your containers ? Thanks

Hi. May i ask will the ice block cracks when you shave them? Mine cracks somehow. But i used steel bowl to make ice block and in the similar freezer to freeze

20-40 blocks how many small/medium/large snow cones does this make? THANKS

How many blocks do you go through in a day?

What did you do with the 2 old machines after buying the 2 new ones would like to purchase them if you still have them

Do you sell just the ice?

Where did you get the containers

How many shave ice and what ounce do you get from one block?

Where do you get the containers

How do you prevent the the blocks from cracking. Mine crack during expansion.

i have the New Orleans block ice shaver but cant seem to find plastic bins for the water to freeze any suggestions .

You do 20-40 blocks how many does that make? I’m needing to make about 250 10oz cup ones Sunday ... help!

How many shaved ice can you sell with 40 blocks of ice

Thanks for sharing. Where do you get your buckets?

Where did u get these from I’m struggling to find the right size!

First time freezing own ice. Freezer only going down to 15-20 degrees. Is this a problem? After 2 days ice still has water bubble in the middle.

What temp do you freeze at for two days to limit block cracking?

How do you pull out the ice from the container, do you have to break it the container?

What temperature do u freeze and store the blocks...

Hey how. Many shaved ice can you make any size per containers?

Hi, I have watched this video several times! Thanks for the help! Would you share what temperature your freezer is at? I have read it is better to freeze them quickly, but some places say to freeze it slowly. I am not having luck with my blocks at home. They have lots of cracks and aren't clear and solid.

Do you encounter ice breaking during freezing process? If so how do you prevent it from happening?

Hi! This may be a silly question, but the water that goes into the tank is it just tap water? And do you keep refilling the tank or does it automatically refill?

Where do you purchase the ice mold containers? I can't find them anywhere!

How many servings on average you can get out of one block and what brand/model of ice shaver do you use?

on a busy day, how many blocks do you go through?

How many servings do you get out of one of those blocks of ice?

Where do you buy the molds ? My blocks crack is there any tips for the blocks not to crack.

You sound rich and exhausted

Love your video can you tell me where can I buy these ice blocks mold??

where you get your supplies to make them! Like the reverse osmosis set up to, share if you don’t mind

Would you say the Fujimarca is better than the Swann?

Can you use just tap water?

How do you take the ice out of the mold?

How much is an average shaved ice?

What type of cooler are you using ? And would you recommend a great northern ice shaving machine ??

how to you freeze ice so that it doesn't crack? and what's the temp in the freezer^^

Where do you find the powder flavors we cant find them anywhere???

Which machine do you use. There are several different machines from that manufacturer

How do you prevent you ice blocks from cracking?

Where do you get your tubs from?

where can i get those tubs?

How many do you get out of a ice block?

Where did you buy your ice block molds and lids

2 days to freeze? I never heard of such a thing, I have a cheapo Kenmore freezer and it only takes about 5 hours.

Do you have an item number for the containers? Thank you

How many blocks do you go through in a week?

Do you need the lids on them

What temperature do you keep your freezer at?

About how many snow cones can you make out of each round ?

Where do you get your containers?

Where did you purchase your ice molds

Is it deep freezer refrigerator?

Bro , i just froze my first ice block It's all cracked ..... I didn't use purified water as I dont have it yet . Will that help with cracking Also , how do you get them out of the container. Not that easy , and not sure if I'll always be ahead of the game enough to have them sitting out getting ready Any tips , please

How do you get the blocks out of the bucket?

20-40 blocks per day serves about how many people sir?

What’s the base/height and thickness of your containers? Thanks

What kind of containers

So all you use is filtered water

Why do you make videos but you wont answer questions from subscribers? So many questions about where to get molds, how many shave ice from each mold etc...

The pour bottles are those 1 Qt?

Do you leave the ice block in the ice shaver machine at all times when the business is open, or you put it back in the freezer after you shave ice to make a shaved ice cone, if you leave it in the ice shaver machine, does it melt downs quickly, or stays frozen for most of the time? thank you much.

Make ye chahi kanh see male ge

My Plastic container keep breaking.. some one please help

No added ingredient to make a ice?

Nice and all but normal people dont have a mini factory in the back

dude tap water really 😕🙁☹️🤯

What are the disadvantages of reverse osmosis? One of the major disadvantages of RO systems for the home is that they remove most of the minerals from the water leaving it with an acidic pH. Also, during the purification process, up to 20 gal of water is flushed down the drain for every gallon of filtered water produced. If I want to open a shaved ice business, should I buy gallons of filtered water, or should I install the RO osmosis system to make the blocks and make the syrups? thank you very much.