Much appreciated 🙏

jhchome52 thank you i will make more vinyl videos soon

Thank you for watching...I do my best

Your very welcome thanks for watching and for the comment much appreciated

Thank you for that comment!!

Thank you for watching, happy to help !!

Thanks for watching and also for the nice comment.

Anyone can do it , few mess ups here and there but it's easy to learn !

Much appreciated thanks for the kind words and for watching!!

Robert Blackburn lol I had a pipe explode and wreck my floor so I planned on putting carpet on it, but it makes such a good work bench for big decals

are you the hard wood floor Nazi ?

I like how you jumped to a conclusion... the WRONG conclusion. That's just moronic and rude.

Thank you!!

Thank you !! Yes I am still doing vinyl . Have not used a cutter/printer but my machine does it with registration Marks...its just harder using two machines to do it .

nate urb... hey thanks man

If you are wanting to do small scale things, might I suggest a cricut explore air 2. You can get kits on amazon with everything you need to start for about $290. It comes with an easy to use software. And settings for different materials. I have one myself and I can't recommend it enough.

Dylan Woodward US cutter , vinyl masters software and oracal 651 vinyl ....papilio vinyl is really good stuff if you only need 12inch rolls

All American Arts MN what is the model of your machine?

Dylan Woodward its a lazer point 2

All American Arts MN thanks man. Keep up the good work.

I buy from both Uscutter.com and Signwarehouse.com. I use oracal the most 651 vinyl and Ht55 transfertape unless I need a color or something that's not an option.

Daniel Valdivia oracal 651

Rontae Moyer it is just a cutter so you would have to layer vinyl if you wanted it to be multicolored like in my video , a lot of those vinyl wraps that you see online are printed vinyl so it's only one layer you run it through the printer then you put it in the cutter to cut the hole out and cut it to size

I use Oracal 651. I am going to try colored ones...this is new! I have always just done White or Black.

Vinylmasters

epoweredrc just got a click on that white with the X ,That will make it so it Picks up the white as a vector color.. A lot of times it does that because the background Is normally white

Thanks !!

I am not to sure on that , I would contact vinyl masters and see .. other wise I know sure cuts alot software is alot similar to ..but I also dont know if that's good for multiple machines

@@AllAmericanArtsMN thanks for the reply. Will be waiting for your response again!!!

My speed i normally run at 500mm/s pressure varies with different material..get a couple circles on there and do some test cuts tell its dialed in were it comes off backing paper well but doesn't cut into backing paper

Thank you

In this video a cheap Amazon that was no good ...I just use oracal ht55 now

Not really anymore I had so many scraped around I never used I normally just trow some random stuff on if I'm not in a hurry to fill gaps

Gary Crumrine vinyl master

Must be Cut , what comes free with it

24inch in the video

I honestly dont remember it's some cheap stuff of Amazon or something I still have a full roll of it it wasn't good ..I have used oracal ht55 for over a yr now... nothing else

Thank you so much yes I really like the transfer paper I'm using from Amazon but it only works for car decals it seems like when I want to put it on stuff like phone cases were laptops or things like that the transfer paper is too sticky I'll try though the one that you just mentioned. I'm watching videos of your able to put the decals on stainless steel water bottles but when I'm trying to put them on hydroflask they're not working I only make t-shirts but sometimes when I need to I make decals and so I'm trying to make these decals for a business and I'm just trying to get them to stick to hydroflask

@@megc4674 yeah that oracal ht55 is good all around sticky enough where you dont have to fight it to get off the backing paper but will release from the transfer paper on really any surface easily. It's great for everything even walls which is one of the hardest thing for vinyl to stick to.

I so appreciate your help! That's what I struggle with is the dang transfer paper! Your decals look really great!

No idea what that is ?!?

Donny Olivera no you would want heat transfer vinyl for that , this is just adhesives vinyl for signs, windows and walls ext...

All American Arts MN Thank you also im thinking on buying the Us cutter SC2 Vinyl Cutter Starter Kit for Laser-Assisted Contour Cutting is the software you are running the basic or another #newtothegame #looking4insite

Donny Olivera mine came with my cutter ..its the basic . There is more advanced softwares but i havent ran into anything i wasnt able to accomplish with it.

Rontae Moyer yes I have made many cornhole boards and put decals on them

eddie chillz transfer paper/tape

Tyler Collier lol not big enough for most things

my knees would not handel that either or my back

Motty Ruttner vinyl masters

Lol

Yeppers

Vinyl masters

All American Arts Ok would you recommend the cricut or us cutter? I’m a complete rookie

@@Joey-id3rk I learned everything on a silhouette cameo but out grew that right away ..I would say go with something 24 inches atleast if you are trying to really make some money not just do little decals . As you see I use mine for so much stuff like stencils for signs , vehicle graphics, apparel..12 inches is just not big enough for me but if your doing little decals stuff for like cups it might work out for you ..At the time I bought my Laserpoint 2 I think it was maybe a 150 bucks more than a cricket or silhouette way worth the extra money