Make Your TCA Airbus Throttles EVEN BETTER With These Mods

Рет қаралды 17,761

Күн бұрын

Since getting a 3D printer last week, I wanted to see if we could improve my Airbus TCA Throttles with Add-ons from Thrustmaster to make it even more of a perfect solution for flying both Airbus and Boeing planes. With a little help from my 3D printer and spad.next,
Throttle detents mod: www.thingiverse.com/thing:467...
Flaps and speed brake mod: cults3d.com/en/3d-model/game/...
Join this channel to get access to perks:
/ @airnott
▼ My PC Specs and Gear ▼
DISCLAIMER: I may earn money on qualifying purchases through affiliate links below:
3D Printer: amzn.to/3yHpFI0
Tobii Eye Tracker 5: tobii.gg/airnott (affiliate link)
CPU: AMD 5800X3D amzn.to/49giGm5 (affiliate link)
GPU: Gigabyte Nvidia 4080 Super amzn.to/48fzIQj (affiliate link)
RAM: 32GB Corsair Vengeance RGB 3600 CL16 amzn.to/469E7nM (affiliate link)
Motherboard: MSI B550-A Pro amzn.to/46ez45C (affiliate link)
SSD: 1TB Samsung 980 Pro amzn.to/3LHvg4D (affiliate link)
PSU: Corsair rm850e amzn.to/4byHacl (affiliate link)
Case: NZXT H510 amzn.to/3RDZyZP (affiliate link)
Yoke: amzn.to/3F1PT7K (affiliate link)
Sidestick: amzn.to/3Q1wKsU (affiliate link)
Throttle: amzn.to/3PC2xPT (affiliate link)
Rudder Pedals: amzn.to/3Q16b7j (affiliate link)
Thanks so much for taking the time to watch this video. If you liked the video, please consider leaving a like, it helps the channel more than you can possibly imagine :)
Feel free to leave a comment if you have any questions and I’ll try and get back to you. Also, let me know if you have any landing or takeoff requests, always happy to oblige. Make sure to subscribe and ring the bell so you don’t miss any future videos.
00:00 - Introduction
00:28 - Climb Gate Mod
02:30 - Flap Lever
#MSFS #3DPrinting #TCA

Пікірлер: 42

@heemoooo 2 күн бұрын

Thanks for posting this! I got this print working too 😊

@aquamich129 29 күн бұрын

Thanks a lot for the content! great stuff on a very modular and appealing throttle

@EKMODELS-du6xs Ай бұрын

Bro defeated the point of it being of an “Airbus” quadrant

@Pegazur 27 күн бұрын

@AirNOTT 26 күн бұрын

Bro doesn’t care

@oliverfoden Ай бұрын

That throttle printed one is very cool, however i feel it would annoy me that it does not line up with the arrow where the original (old) detent was i may give it a go thanks for showing us very helpful.

@AirNOTT Ай бұрын

There are new labels that you print, I just have y done that yet. I should have mentioned that

@rezaomar3397 Ай бұрын

@@AirNOTTwhere is do you get the labels

@captpugwash3510 Ай бұрын

If you would get annoyed it would be for the totally wrong reason. The REAL A320 throttle detent is no-where near where Thrustmaster have put them. AirNOTT is spot on with this, and this I must have ! Well done

@oliverfoden Ай бұрын

@@AirNOTT oh then that’s a lot better

@oliverfoden Ай бұрын

@@captpugwash3510 yeah i know there very far as i have been in the jump seat of many a320 and airbus aircraft during flight but it just did not line up but now there are the stickers that makes it a lot better

@SlyShot Ай бұрын

This is great, thank you for the video. What length spring did you use for the flap handle?

@stujeffrey Ай бұрын

Yet more incredible content. Loving every vid

@AirNOTT 26 күн бұрын

🙏

@davidhenry3225 Ай бұрын

Really interesting… thank you for sharing these cool ideas! 😊

@tolgakacmaz1091 Ай бұрын

I'll try asap. Thank you. Also do you have an idea why my thust levers are giving different power like %4-5 when they're in same positions? They re equal at climb+flx.

@bartvansuijlekom6049 Ай бұрын

I have exactly the same, it’s probably cheap manufacturing or so

@lowrivera Ай бұрын

I built ,y own throttle quadrant. Specifically the DIY737 from Carl and I do this but backward as I had to adjust my flaps lever for Airbus. Not for nothing but I would adjust the quality settings on your printer. My printer way smoother and cleaner than those.

@swedishguyflies9077 Ай бұрын

Great stuff - On the first mod, the site shows designs with V1, V2 , V3 etc. What is the difference ?

@AirNOTT Ай бұрын

Unsure, I printed v6 assuming latest = better but I’ll be printing the others in the coming days and testing. I’ll let you know what I find!

@aqalevi 4 күн бұрын

Do you know which size screwdriver you need to unlock the screws from the flaps and speedbrake top

@AirNOTT 4 күн бұрын

Not off the top of my head. I’d have the check

@kilotangosierra Ай бұрын

are the detent clicks still very audible on the throttles after replacing them with the 3d printed ones?

@AirNOTT Ай бұрын

Yep!

@Capone78 Ай бұрын

Im guessing you have to hold down the hole thing when "pulling" up the flaps. Unless you have attached it

@AirNOTT Ай бұрын

Command strips are my friend 🙂

@Capone78 Ай бұрын

ah nice@@AirNOTT

@bagwaa9948 Ай бұрын

I would love to know more about the 3D printer, I am so tempted to buy one for exactly this kind of stuff but I know almost nothing about 3D printing.

@AirNOTT Ай бұрын

You and me both! I’m very much starting out. Did a fair bit of reading and the Creality Ender seems to be the best bet at around £200ish before you move up to silly money. Thing is, there are many Enders in the line up, the v3 SE seems to be the most favoured right now

@bagwaa9948 Ай бұрын

@@AirNOTT down the rabbit hole I go, I’ll use your link if I end up buying one

@Mrv1960 Ай бұрын

Buy a Bambu P1S, very high quality printer.