NEW High Temp Open Source IDEX 3D Printer! 22 IDEX V3 First Look!
Рет қаралды 13,516
8 күн бұрынThe New Vision Miner 22 IDEX V3 can print at 500c on the hotend and it's Open Source! This machine is awesome for any filament, but especially anything High Temp!! A special thanks goes out to the team at Vision Miner for having me out and showing me this awesome machine!
Vision Miner Website: visionminer.com/
Join this channel to get access to perks:
/ @theedgeoftech
🛑 Subscribe for more: www.KZfaq.com/theedgeoftech...
SOCIAL/SUPPORT LINKS
💵 Patreon: / theedgeoftech
💲 PayPal: paypal.me/theedgeoftec
📸 Instagram: / theedgeoftech
📣 Twitter: @theedgeofteck
💬 Discord: / discord
👽 Facebook: TheEdgeofTechOfficial
🎥 FILMING GEAR (affiliate)
www.amazon.com/shop/theedgeof...
Disclaimer: Some of these links go to one of my websites and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
#visionminer #3dprinter #22idex
@TheEdgeofTech 7 күн бұрын
Check out Vision Miner's Video Here! kzfaq.info/get/bejne/eaeHqMuDr7rWeWQ.html
@3dpathfinder 6 күн бұрын
Its 14,900 dollars , Id say that is just a bit out of the range of your average 3d printer. Todays video is on the Sovol SV08 and my next video is a 15k printer...Such diversity
@TheEdgeofTech 6 күн бұрын
I agree that this is not for the normal crowd! It's definitely geared towards business, but it's super cool that they allowed me to come check it out and make a video on it! There's a reason why you don't see many/any videos on this machine. It's because the businesses that own them don't make videos or can't because they're under NDA. So when I get a chance to make a video about an awesome machine that could do more than I have ever even thought about doing myself, I definitely jump at it! I hope you enjoyed the video! What would you Make if you had a printer with these capabilities?
@Todestelzer 6 күн бұрын
I think it’s good to show such printers now and than to see what’s possible in 3D Printing. But yeah I bought a Snapmaker J1 instead 😅 It has a automatic X/Y calibration and a guided z calibration. Pretty easy to do. Only downside is I had in 3 months already 2 issues with it. Changed out X axsis rail and ribbon cable on the right extruder.
@TheKeverin 5 сағат бұрын
Its 15k dollars and they use the cheapest Meanwell LRS Power supplies without PFC-Filtering. Those would not even be Legal to use in the EU in homes as they are not class B rated. No idea about the US tho.
@Todestelzer 4 сағат бұрын
@@TheKeverin you only need PFC above a certain limit. I think it’s 300w. Don’t think this Printer needs more than 300w if the bed is powered by mains voltage.
@TheKeverin 4 сағат бұрын
@@Todestelzer But its only rated class A. So no Home use
@RexAnothership 2 сағат бұрын
Awesome machine. This is what I need. You should make an XXL size with next level tool changer. This is the definition of open source.
@Wbmfishman1 4 күн бұрын
Fun to dream 😊
@klackygears 2 күн бұрын
Great shirt! Also, I'm enjoying your videos, thanks!
@mannysengineeringindustry1064 6 күн бұрын
It's a beautiful printer
@TheEdgeofTech 6 күн бұрын
I think so too!
@flaimingice23ive49 7 күн бұрын
I ❤ 3d printers!!!
@TheEdgeofTech 7 күн бұрын
Awesome! Me Too! Thanks for watching!
@lynntatro7374 6 күн бұрын
Amazing machine!
@TheEdgeofTech 6 күн бұрын
I agree! It's pretty sweet!
@Azzysdesignworks 6 күн бұрын
Looks like a HevOrt setup. Cool!
@braunersalon8548 5 күн бұрын
Has anyone ever seen the thing print?
@dmax9324 4 күн бұрын
This is an awesome video, and I'd love to see the ability to quickly print flow fields for fuel cells and electrolyzers with different flow patterns and number of flow channels. It would accelerate optimization for high temperature and chemical application in hydrogen generation and utilization. Being able to do that with gas and liquid tight, base resistant, materials in FDM quickly would allow researchers to quickly test new ideas rather than just going to CNC. Wondering if this printer could do that with roughly 100mm by 100mm by 10mm flow fields with different serpentine patterns.
@user-hc5ph7jh1i 6 күн бұрын
I would like to see you do a helicopter video with some pek
@TheEdgeofTech 6 күн бұрын
That would be awesome!
@826legoguy 5 күн бұрын
Hey i saw you at mrrf when is the video coming out
@danielknight1162 6 күн бұрын
HAMMER AND NAILS!!!
@TheEdgeofTech 6 күн бұрын
Ooh I like that! What would you test them on?
@danielknight1162 6 күн бұрын
Hammer it into wood of different density or even sheetrock. Use them to hang a sign on that beautiful background wall.
@RGCbaseace 6 күн бұрын
Love the shirt
@TheEdgeofTech 6 күн бұрын
Thank you!
@sabahoudini 6 күн бұрын
Great machine. Where can I get those vision miner shirts?
@TheEdgeofTech 6 күн бұрын
Right! I need one too!
@lynntatro7374 6 күн бұрын
That Vision Miner carbon fiber plate looks like high modulus 'Dragonplate'.
@grahamwatson3677 4 күн бұрын
I think is from Rock West Composites. Still a high temp resin (not as heat resistant as Dragonplate), but it's a little cheaper.
@user-cg5tm7ks3e 2 күн бұрын
@@grahamwatson3677 It's from Protech composites and they lie about "developing the resin"
@PinkGirl2242 Күн бұрын
Right at the beginning when you put your hands on it it slid on the table a bit. That machine will definitely need serious anti slip feet.
@marcozacarias1675 Күн бұрын
about time! As a former V2 user for a short time, the previous version was terrible and completely failed. Bed falling off the shuttles, the old version of the emergency stop switch looked like it was from an old computer, i remember the wiring on the back looked terrible, probe breaking first try, nozzle bent... I can keep going, pics on the facebook community support page. Glad to see that V3 is out with improvements, but until we have real reviews from other users, i would not consider.
@TheEdgeofTech Күн бұрын
@@marcozacarias1675 I totally understand the apprehension! I'm hoping to get one myself and go through it so everybody can see how it is!
@michelefromflorida7852 3 күн бұрын
Poly carbonate record blanks for cutting music on.
@loganbrantley7216 Күн бұрын
Not sure why you would need to go to 500C for any plastic a Bambu x1c goes to 300c that's 572F. The new x1e goes to 320C (607F) and has active chamber heating and you could buy like 5 of those.
@mikeb1596 16 минут бұрын
Engineering grade plastics need 300-450c and build plate temps well over 100c. Bambu doesn't make printers designed for high temp engineering plastics, it's an entirely different class of printers.
@reh.4919 4 күн бұрын
Shiny!
@coreypeacock9900 7 күн бұрын
last I checked this printer is anything but open source...
@TheEdgeofTech 6 күн бұрын
Why do you say that ?
@coreypeacock9900 5 күн бұрын
@@TheEdgeofTech Could just be me but when I think open source I think like, any piece of info I could need is readily available. But there is no CAD model for this printer to download, there is no BOM so I can source my own, nor are there any instructions. They even said in their video about it that they developed their own proprietary XY motion system. Nothing except the specs for this printer are available to the public, therefor to me, and I think to most, this printer is not in the least bit open source.
@TheEdgeofTech 5 күн бұрын
@@coreypeacock9900 I understand what you're saying for sure! Pat, the hot end, board, power supply, Motors, etc. Etc are all readily available. We can get them right now If we want to. The board is open and not some proprietary firmware. I understand that the cad model is not available, But when it comes down to actual functionality and replacement parts, I believe it is. I will ask about the cad model because I'm curious though!
@coreypeacock9900 5 күн бұрын
@@TheEdgeofTech I mean I get that but just because I can buy the parts for something, that doesn't make it open source... by that logic you can call a lot of things open source that simply are not. Yes those individual parts may be, but the unit as a whole is not. If something is open source, by definition that means enough knowledge about it is open to the public that it can be replicated or modified, such as Voron printers. No such information about this printer is available to the public besides SOME of the components it uses. Granted its my own opinion, but I just think that taking a handful of the components from the printer that are open source and calling the entire printer open source is very much a stretch.
@TheEdgeofTech 5 күн бұрын
@@coreypeacock9900 I totally understand what you're saying and do appreciate your opinion! I see it both ways. Aunt, I am definitely not saying you are incorrect. I'm going to bring this up to the team and see what they say. Again, totally understand what you're saying, and definitely respect it!
@AndrewduToit Күн бұрын
I am pretty sure you can build that machine and maybe the bed won't go to 200°C but that price gap is ridiculous. It has normal 3D electronics it is insulated but that does not justify that price.
@Symbole22 13 сағат бұрын
How whant spend 15K for a single printer when you can buy 10x X1C carbon for the same price ? =>
@digitalfire01 2 күн бұрын
Makerbot is the biggest offender of locking customers into their ecosystem, Ive had so many issues with them. Very happy to see such printers coming to market so I can dump my method x
@peters7413 6 күн бұрын
Why RED top.....? 🤔
@foam27 4 күн бұрын
Because $15k😂
@marcozacarias1675 Күн бұрын
why not?
@wimnanoe5887 6 күн бұрын
Printer manufacturers must also invest in filaments recycling machines
@TheEdgeofTech 6 күн бұрын
I like this idea a lot! Thank you for watching!
@wimnanoe5887 6 күн бұрын
@@TheEdgeofTech great content as usual
@EVgenrator 21 сағат бұрын
Почти пятнадцать тысяч долларов за это? Очень деньги нужны? Немыслимая сумма, придётся купить эту копию у китайцев через год, за три тысячи китайских денег.
@TheLoneWolfz5 2 күн бұрын
Massively overpriced Ratrig.
@TMS5100 6 күн бұрын
This is a rebranded AddWise IDEX. There are very few favorable reviews of this printer and a bunch of bad ones. Too bad this video did not show the printer in use.
@ottersdangerden 6 күн бұрын
"We are thrilled to announce that Vision Miner, a global leader in industrial 3D printing solutions, has officially acquired AddWise." - well yeah I can see that being a thing.
@TheEdgeofTech 6 күн бұрын
I agree, I wish I could have shown it working! If I had more time there, I would have definitely done that. I can assure you that I have seen prints that have come off of them and they are awesome in person! They just did not have any running while I was there. But I can fix that and get us some footage!
@TheEdgeofTech 6 күн бұрын
Yes! They acquired that company , and I met the Guy who designed this printer! He was from the Ukraine and he now works in-house at Vision Miner with them! They are not going to put out garbage, I fully believe that!
@ottersdangerden 6 күн бұрын
@@TheEdgeofTech I actually wonder if the bad reviews were of the older design where you would burn your arms. I could see that as an unfavorable review.
@dmax9324 2 күн бұрын
@@ottersdangerden I heard from the company that those bad reviews were somewhat of a smear. These units are wildly improved over the initial beta level units. Nothing like the old addwise version.
@dieselphiend 4 күн бұрын
I could build this for about $3k.
@INNOCUBE3D 4 сағат бұрын
I can build it for about $1K.
@dieselphiend 3 сағат бұрын
@@INNOCUBE3D I seriously doubt it. You'd probably spend that on just 3 high temp linear rails, and carriages.
@INNOCUBE3D 3 сағат бұрын
@@dieselphiend I am in China
@dieselphiend 3 сағат бұрын
@@INNOCUBE3D How much are high temp linear rails, and carriages, in China? Can you provide me with a product name?
@dieselphiend 3 сағат бұрын
@@INNOCUBE3D How do you access the internet outside of China? Isn't it risky?
@resignator 6 күн бұрын
$15k and not open source. This is a joke, right?
@TheEdgeofTech 6 күн бұрын
Um. It's definitely open source. Not sure where that comment came from?
@rammiii2908 7 күн бұрын
😂 this is "Made in USA" No camera, No cooling for the Board, worst printed and cheapest klicky Probe ever, No Display, cheapest 5015 for the heat chamber and 15K for this thing.... Just lol 😂
@TheEdgeofTech 7 күн бұрын
Interesting take on the printer. Is there anything about it that you DO like or is it all just bad??
@rammiii2908 7 күн бұрын
@@TheEdgeofTech the high temp for chamber and hotend are a nice thing. The idex is also good. The suction is a good Idea as well, but should be included for the price. There was nothing said about the slicer, this should also be included and made for the printer. Lidar is also no included, so you have to calibrate like 5 years ago. No beacon probe or similar included. This is just ridicolous for this price.
@TheEdgeofTech 7 күн бұрын
@@rammiii2908 thanks for responding! Actually it calibrates itself with the click of one button. There is no manual bed leveling and the slicer they use I believe is Prusa Slicer. And the probe is included.
@rammiii2908 7 күн бұрын
@@TheEdgeofTech how can the filament be calibrated without lidar or something? I don't talk about bed leveling. Where is the accelerometer? If this thing would be sold for "tinkerers" for 2k maybe 3k it would be okay, but 15k for a printer with technology from 2020 is just insane.
@offsetmakerlab7514 7 күн бұрын
I hope you get to try one out, I'd love to see what you'd do with it!
@BeefIngot 7 күн бұрын
Yuck, it has slice engineering parts. Apart from that glaring fault, it looks pretty well built, open source and a well laid out electronics panel are both great, but there weren't many details about the motion system, speeds and feed etc.
@3dexperiments 7 күн бұрын
It's an industrial product. "Temperature Rating 450°C" for the Slice Copper Head - and they stated in the video it can do 500C.
@TheEdgeofTech 7 күн бұрын
Thank you for your feedback! I can ask them about the speed and feeds, but mostly this thing would be used for very high temp filament and you would want to go slow for that. But it's definitely good info, so I will for sure ask!
@TheEdgeofTech 7 күн бұрын
@@3dexperiments I can't speak to that as I was going through what their specs are. But I will ask them! Thank you for watching!
@BeefIngot 6 күн бұрын
@@3dexperiments They do state this in their own video as well. I imagine its possible for a company to state a rating is one thing, but then later seen that a higher rating is fine too, or there could be revision changes, not that I'd ever want to defend slice, but that sounds completely feasible.
@Famouslastplace 6 күн бұрын
11:14 ehh. IDEX is on the wrong path. They give off "wE pUt CaRbIn FiBeR iN oUr BuILd PlAtE" kind of vibes. Didn't even hit on any points of the benefits or explanation as to why they decided on that build plate. The entirety of this video represents that very thing. A lackluster explanation; or lack their of, of what this product brings too the table and the problems it solves.
CNC Kitchen
Рет қаралды 114 М.
Action C Mini
Рет қаралды 79 МЛН
Stranger Parts
Рет қаралды 102 М.
Vision Miner
Рет қаралды 13 М.
Vision Miner
Рет қаралды 10 М.
Rat Rig
Рет қаралды 30 М.
Nero3D the Canuck Creator
Рет қаралды 25 М.
Buy Smart┃Магазин ноутбуков
Рет қаралды 661 М.