Project 0134 | Slotting Machine on a Lathe | Internal and External Keyway Cutting

Рет қаралды 2,108,503

Жыл бұрын

Get the exclusive NordVPN deal here: nordvpn.com/makeitextreme. It’s risk free with Nord’s 30 day money-back guarantee!
Thanks to NordVPN for sponsoring this video.
On this video, we decided to show the making of a slotting machine which is placed on a lathe.
► Get the plan: / makeitextreme
► Linktree: linktr.ee/makeitextreme
►All details about the video: bit.ly/slottingmachine
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3IgWU4G
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.com/shop/makeitext...
-----------------------------------------------------------------------------
Click here to Subscribe: bit.ly/MakeitExtreme
Second Channel: bit.ly/MakeitExtremeShorts
Facebook: bit.ly/Makeitextreme
Instagram: bit.ly/makeitextreme
TikTok: / makeitextremeshorts
Welding Machines:
Mig: bit.ly/Rallymig
Tig: bit.ly/PITIG
►Special Thanks to our new Patrons:
TOP (Jakob Keller)
Antonio Sola, Rafał Merchelski, Artemiy Starolavnikov, Ryan Petersen,
Dyon van Baal, Dorian Mathews, Alex, Allen S Mahler, Vincent Ret,
กาวิน วิจารณ์, Nicolas Vaes, Chuck Miller, Angelo Negro, Noah Parker,
Sami Fischer, Droyer, Kostadinov Deyan, Hartono Lie, Ricardo Lopes da Silva,
RetroSteamKnight
Music from Artlist: bit.ly/MIEArtlist
(Subscribe now and get an extra 2 months on your subscription)
#makeitextreme #makeitextremeshorts

Пікірлер: 592

@MakeitExtreme Жыл бұрын

Get the exclusive NordVPN deal here: nordvpn.com/makeitextreme. It’s risk free with Nord’s 30 day money-back guarantee!

@danielcartier2570 Жыл бұрын

From Ecuador Congratulations my dear friends really you are the best all homework.

@gghghhjtr4478 Жыл бұрын

انت مبدع

@mohdnasimuddinmohdnasimudd8681 Жыл бұрын

@@gghghhjtr4478 y

@khachiknikoghosyan7576 Жыл бұрын

@@danielcartier2570 թհգռռ

@hamidbaddar700 Жыл бұрын

@@gghghhjtr4478 gmg

@BernardSandler Жыл бұрын

The way you tell the story of these builds improves and evolves every single video. The designs have always been brilliant.

@MakeitExtreme Жыл бұрын

Thank you very much!:)

@aymaneamr1540 Жыл бұрын

@@MakeitExtreme I want to draw all the pieces I need help

@mumblbeebee6546 Жыл бұрын

Dude built himself a modular shaper. I’m loving it so much! Your storytelling is so good too! Thank you for sharing these videos!

@MakeitExtreme Жыл бұрын

Glad you enjoy it!

@junaalbafaraj9585 Жыл бұрын

I have watched more than 1 channel with mechanical and engine themes. But this one is EXTREMELY GENIUS. I can only shake my head in awe of what this brother did. With every detail very fine and precise measurements. I really love this channel. Hopefully in the future videos I can see you driving your motorbike with your single mini jet engine. gbu brother. brilliant job..👍🏻👍🏻❤️❤️

@DanKoning777 Жыл бұрын

*Everything about this video was great.* The lathe work, music choice, playback speed and editing, etc were all excellent. *Well done.* I get you're busy, but still; I wish you were able to post more videos. Besides learning from them, they're also relaxing.

@MakeitExtreme Жыл бұрын

Thank you very much!

@TR-rj9fn Жыл бұрын

Amazing every time. The ideas, The engineering, the making, the filming, the editing, ... Every thing is just WOW! Thanks a lot.

@MakeitExtreme Жыл бұрын

Glad you enjoyed it!

@spudnikholyghostroller7314 Жыл бұрын

The talent that you have been blessed with takes many years to learn it is the same becoming a master craftsman in wood working making fine furniture or cabinets of top line quality.

@silverbullet7434 Жыл бұрын

Enjoyable watching the builds you do. You don't leave out any details. This key way cutter is really a work of art .

@kaosthecosmicreviewer1055 Жыл бұрын

A magnificent piece of engineering fellas Well done.

@allanramgoolam8007 Жыл бұрын

Bro your a born genius, honestly you got burned talents,keep moving forward brother and stay blessed.

@Redneckmfg Жыл бұрын

WoW, You guys never disappoint!!!! I can see that coming in handy for future Extreme Builds.....

@boltonky Жыл бұрын

Love the build you always give my mind something to think about engineering wise, only thing i might do different is add a clapperbox but get that given yours rotates it could become a problem. Other option is adding a horizontal drill attachment which some lathes already have attachments for. Great work and only dream of a day i can afford steel when its not for a paid job haha

@Miketm155 Жыл бұрын

That is bloody brilliant! One of your most interesting builds! 👌👌💪

@Smallathe Жыл бұрын

A great video and DIY making. Keep up the wonderful ideas and impressive fabrication guys!

@bryanwanek46 7 ай бұрын

Awesome build man!

@spatialguy5571 Жыл бұрын

G’day guys, you make THE MOST AMAZING projects on KZfaq without a doubt! I became a boilermaker straight from school and have learned machining reasonably well. I make a lot of things in my shed, but you guys are on another level! I am ALWAYS totally amazed. Shows that you need more than the actual metal skills to be really good at ‘metalwork’. Really really good! I watch a lot of sites like yours, but none really compare. Quick questions now that I’ve stopped with the hero worship, lol, Are you worried the bearings will quickly were the groove as they are much harder. Is there a reason you didn’t use pillow blocks or linear bearing cylinders? - I prefer your make it yourself so I’m not being critical, just curious. I’m just an old disabled pensioner in Australia now, but I’m still going to see if I can support you somehow, seems fair since I get so much enjoyment from your work. The videos could be a little more frequent though, you tend to ‘disappear’ occasionally. I’ve been watching since your “Extreme Pipe Notcher” Got me hooked immediately! Anyways, all the best mate. 🍻 Michael

@alocin110 Жыл бұрын

It looks very easy but I can tell the deep engineering involved in this design. Very fascinating and ingenious. I loved watching every secod of it. Your design, skills, and building something from drawing board to working tools, are just amazing. Thank you for sharing.

@Ramdas-xw1yt 5 ай бұрын

JAYSHREERAM

@barthanes1 Жыл бұрын

I could see that tool being very useful. Nice work. And congrats on getting a sponsor. Hadn't seen one on your channel before.

@MakeitExtreme Жыл бұрын

Thank you very much!

@ManojVarsani Жыл бұрын

Good work man. What an accuracy and finishing bro.

@user-xw7jt2ol9t 3 ай бұрын

You are a talented engineer. Thank you for your videos. They are very useful to me

@NPerillo Жыл бұрын

🤯 WOW. This is what im here for. So nice to watch!!

@felixfromnebraska8648 Жыл бұрын

I really love your channel, my friend. I get mesmerized watching your precision work. Thank you for sharing with the world. Felix

@MakeitExtreme Жыл бұрын

Thank you very much Felix!

@986munkie Жыл бұрын

I watched this video with no sound due to other things going on. Absolutely fantastic video! Well done and well built!

@MakeitExtreme Жыл бұрын

Thank you very much!

@BITTYBOY121 Жыл бұрын

You're a star ! - At 10:37 you just showed an amazing trick to hold square bar in a 3 jaw lathe chuck by using a bit of tubing to get around the 3 jaw problem - I sadly didn't think of this before I bought and installed expensive 4 jaw self centering chucks on all my lathes just to have the privilege of being able to turn down square bar stock without having to use a 4 jaw independent chuck and mess around with clocks to get it dead center ! - Well done - Great project and video man ! 👍👍👍👍👍

@mastergilbert97 Жыл бұрын

Use collet or make collets

@BITTYBOY121 Жыл бұрын

@@mastergilbert97 Yes !

@yenaurapourtoulmonde Жыл бұрын

Video takes, lighting and editing are top level. Other could take example.

@ronmurphy9819 Жыл бұрын

Great video. It all starts with an idea, and that was a pretty good one. I love it! Thanks Ron

@Miniatures-And-More Жыл бұрын

Amazing Design , I Loved The Ball Guide Mechanism !

@billgilbride7972 Ай бұрын

Well thought out project. Nice seeing it come together as presented. Nothing flimsy going on here AT ALL!

@vanVcreaate Жыл бұрын

Indexing or rotary table, shaped cutter and you have an awesome gear cutter. Keep up the good work !!

@em21701 Жыл бұрын

The work-holding techniques in this video are pretty clever. Drill some more holes on the motor cam at different radiuses to be able to vary your stroke length.

@kristianskov4841 Жыл бұрын

....you should always be able to vary your stroke length....😁

@ajjskins Жыл бұрын

It’s been a minute since I’ve been on a channel cinematography is really stepped up nice work man

@prestongoodolboy8561 Жыл бұрын

Beautiful work guys, I'm going to build one for work. I hate cutting key ways with a broach and press.

@unusualfabrication9937 Жыл бұрын

using the ball bearings to linearly constrain the shaft is genius

@MrTimsvids Жыл бұрын

yeah, what he said!

@union310 Жыл бұрын

Standard engineering practice

@NStone79 Жыл бұрын

Great build, but how well will it hold up though? The balls are constraining the shaft to move in 1 dimension, but it's riding on 2 rather sharp edges that are the keyway shoulders. I'm sure it will suffice for intermittent use, but why not a ball nose end-mill of exact same diameter as the retaining balls for increased contact area?..... Also.... No lift on the return stroke? Regardless, great build, keep up the good work!

@Argosh Жыл бұрын

@@NStone79 there's so many places where this falls short, but it's not meant as a serious machine tool. If they use it at all it'll be fine for the job.

@paradiselost9946 6 ай бұрын

@@Argosh it wouldnt get used at all, i dare say. gotta clamp the mount down. then go get motor from shelf, clamp that down. fiddle fiddle, tinker tinker, adjust and tweak... spend half an hour setting up, when you could drop the bar straight into the toolpost and do it by hand in a minute. then pull it all off and shove it back on the shelf to do the next operation... thats not a useful tool. its so slow and clunky it wouldnt be helpful if doing several, either. like everything made on this channel. its a facade. flashy editing, dramatic music... but the actual engineering is absolutely pathetic. nothing is done properly. rather than watch it fascinated... you already see that theres some failings... try and pick up on just how many aspects of each and every design he gets wrong... whole backlog of videos with these janky contraptions that serve no real purpose other than make views. "he"... its a whole team of people... at least three. everything planned and thought out but nothings actually... "thought out". other than "how to make video". am i being too negative? naw. this is one of those channels that i try not to watch as it simply pisses me off. like bashing my head against a brick wall :)

@G40bv Жыл бұрын

Every time I see one of your videos I learn something. I've never seen a fly cutter used like that. It's the first time I see someone put one on the lathe.

@bmwautonerd Жыл бұрын

Absolutely amazing video !

@emperadorromano567 Жыл бұрын

At the beginning I didn't knew what it was, but damn is it cool! That's very practical! Congratulations again my masters!

@smashyrashy Жыл бұрын

One of the best machining videos ive seen in a while

@SuperStefanventer Жыл бұрын

Editing is on point!!!!

@iancraig1951 Жыл бұрын

that was an excellent job---well done

@homemadetools Жыл бұрын

Nice work as always. We shared this video on our homemade tools forum this week 😎

@MakeitExtreme Жыл бұрын

Awesome! Thank you!

@53jeepjeff Жыл бұрын

Excellent build. Very useful tool!

@Donorcyclist Жыл бұрын

Impressive, as always. The great work!

@SekAustria Жыл бұрын

nice addition for the lathe!

@khoirulrozikin4777 Жыл бұрын

Good work and high precision👍

@MCsCreations Жыл бұрын

Brilliant, dude! Really beautiful machine!!! 😃 Stay safe there with your family! 🖖😊

@MakeitExtreme Жыл бұрын

Thanks, you too my friend!

@user-kt2hb8xr3p Жыл бұрын

Great job, thank you brother. You are so talented

@mohammedhajji8973 Жыл бұрын

the best work i have ever seen

@hanko456 6 ай бұрын

Wow this guy is a genius. Thanks for sharing 👍 you knowledge. I learned something amazing 😢. Thank again

@hasankorzebor2605 Жыл бұрын

you are so professional man

@manul707 9 ай бұрын

So professional love it

@weicheisen9999 Жыл бұрын

Great idea and great work ! Thumbs up for this !

@kafouille4870 Жыл бұрын

it’s a remarkable machine bravo!

@MachiningandMicrowaves Жыл бұрын

Love the tracking shots around 11:35 I am SO going to borrow that idea for my own vids!

@prince-of-saiyan Жыл бұрын

What a editing man, total masterpiece 🔥🔥🔥🔥🔥🔥🔥🔥🔥 and what a idea, total genius 🧠🤟🤟🤟

@MakeitExtreme Жыл бұрын

Glad you liked it!!

@ksmechanicalengineering92 8 ай бұрын

That tool is amazing

@casalmikurti Жыл бұрын

Muito lindo, uma verdadeira obra de arte!!!! Parabéns amigo Deus abençoe vocé e toda a sua família grandemente abraço Tmj 🙌👏👏🤜🤛🇧🇷🙏

@balakrishnanacharya 6 ай бұрын

Mind blowing work

@Austinificationify Жыл бұрын

Holy shit how am i just now finding this channel. Some Great machining action going on here

@hippie-io7225 Жыл бұрын

Super job, as usual! Would it be possible to repurpose this idea for cutting splines? (OD and/or ID) Splines seem to be a big hangup for E Vehicle conversions.

@styx5977 Жыл бұрын

The filming guy + editor of the video did as much work as the actual building process😭👍

@Lucas_sGarage Жыл бұрын

So, you made a shaper for the lathe..., Very cool

@Jimmeh_B Жыл бұрын

I can't help but think, given the time taken to knock that up and the resultant flex you could see on the cutter in one of the shots... It probably would have been quicker to mount two motors on the x and y wheels and just bolt a cutter into the tool post. I guess I only think so because for me it's trivial to control a couple of steppers. To each their own.

@life.is.to.short1414 Жыл бұрын

So much detail. Keep it up..

@djevo3441 Жыл бұрын

Amazing idea congratulations my friend

@user-ng6xq9tg6z Жыл бұрын

Класс! Высоко профессиональная работа! Смотреть одно удовольствие. С уважением к вам простой российский пенсионер. Желаю всем здоровья мира и добра.

@xscitobor1233 Жыл бұрын

All of the music in this video are bops

@skulldark_ Жыл бұрын

Insane projects!

@hatemismail6154 Жыл бұрын

it's amazing my respect from egypt 👍

@TEIEB_RIADH Жыл бұрын

impressive 😎 looks like a hollywood movie nice shooting

@watahyahknow Жыл бұрын

the rotating part is a good idea , been thinking on sumting simulair but mounted verticly and using a milling machine base , the lathe is more solid though

@lastridetomussewala5170 7 ай бұрын

Very very very very nice👍👍👍👍 Good idea sir🎉🎉🎉🎉 You are genius and good work🎉🎉🎉God bless you❤❤❤

@monkeyflyer410 Жыл бұрын

Your work is impressive! One question that I'd like to know the answer; I use similar tooling to yours, but what ever I do I end up with relentless birds nests of continuous unbroken swarf, very unlike your easily manageable fragmented swarf. Is it the inserts that you're using, or the speed as well? Out of interest what are your choice of speeds and insert?

@geo2cv6tron14 Жыл бұрын

Really really impressive 👍

@428Mario Жыл бұрын

Impressive work

@shanecateriny4359 Жыл бұрын

Dope is the only word that comes to mind.

@joewhitney4097 Жыл бұрын

Great project on useful shop tool. Thanks for sharing.

@MakeitExtreme Жыл бұрын

Thanks for watching!

@HP_rep_mek Жыл бұрын

Very nice video editing👍

@greattechnical_AH Жыл бұрын

wonderful, I love this work, especially when you get what you want from the design, and during work when you work and you notice iron filings on circular shapes.👍

@DragonofDread 6 ай бұрын

Now that I've seen the end product, you could use some kind of tapered bit to make your own gears if you wanted to. That would take things to the next level.

@albertooliveiraOliveira Жыл бұрын

Jackob is the man...! lol Brazil. Good job.

@benjaminnarvaezesquivel4615 Жыл бұрын

Me gustaron los acabados se ve muy bien el proyecto gracias por el video 😀

@engineer567 9 ай бұрын

Super skill bro

@steveb936 Жыл бұрын

Incredible, thats good viewing

@jorgepaulo5118 Жыл бұрын

Fantástico trabalho de nível internacional Maiden Brasil!!!

@buckinthetree1233 Жыл бұрын

Very nice. The only weakness I can see is the store bought turnbuckle. Everything you made was excellent. Are you able to index your lathe chuck inorder to cut splines?

@danielcartier2570 Жыл бұрын

From Ecuador Congratulations my dear friends really you are the best all homework.

@mateusandradeantunes6417 Жыл бұрын

Top demais muito bom parabéns vc é um exelente engenheiro

@vinceianni4026 Жыл бұрын

Hello mister beautifully made professionally done good job my friend

@MakeitExtreme Жыл бұрын

Thank you very much!

@kalleklp7291 Жыл бұрын

Excellent build. :)

@223mike Жыл бұрын

Excellent work!!!!

@rsz90182 10 ай бұрын

You have skills beyond a my imagination.

@micksbackyardaquaponics1408 Жыл бұрын

That is amazing what you build there it was great to see it an watch it there an keep up the amazing video clip there 👍👍

@MakeitExtreme Жыл бұрын

Glad you enjoyed it

@kaelkramer1259 Жыл бұрын

Looks good!

@Uswesi1527 9 ай бұрын

Excellent. Thanks

@rabelaninemurunzini2732 Жыл бұрын

The best Channel ever

@miguelfernandez2325 Жыл бұрын

Wow that was awesome.

@subhashk941 Ай бұрын

Very nice videose 👍👍 .. Turning . Threading. And parthing . grooving. Operations very nice👍👍

@guipop2614 Жыл бұрын

Incredible Video work, good job !

@MakeitExtreme Жыл бұрын

Glad you enjoyed it

@guipop2614 Жыл бұрын

Of course I did, and also incredible technical performance, the choices of solution are really good

@RJMachine62 Жыл бұрын

Awesome job! If I were to change anything, I would put a T Slot in the flywheel so you could adjust the stroke. Otherwise, great!

@prince-rc5pv 7 ай бұрын

I really like what you did

@nethajiajay4617 Жыл бұрын

well done man keep on doing wishes from india