10 Best Butt Joint Methods | Woodworking Tips & Tricks

Рет қаралды 4,870,118

4 жыл бұрын

10 different ways to butt joint two boards together. Brought to you by Squarespace. For 10% off your first purchase, go to: squarespace.com/makesomething
The Holy Grail of Tablesaw Accessories. DIY Sliding Crosscut Table
• DIY Sliding Crosscut T...
0:40 Glue and Nails
0:54 Screws and Plugs
1:40 Pocket Holes:
2:03 Biscuit Joint
2:45 Festool Domino
3:24 Through Dowel
3:47 Blind Dowel
4:23 Spline
6:35 Mitered Butt Spline
8:00 Hidden Mitered Butt Spline
★ TOOLS / SUPPLIES ★
Wood Glue: amzn.to/2U3BNtq
Counter Bore Drill Bit: amzn.to/2OVJZwd
Drill: amzn.to/31kRLSU
Drill Press (similar): shrsl.com/1lwfn
Plug Cutter: amzn.to/2P5nzZD
Pocket Hole Jig: amzn.to/35IQ9pm
Biscuit Jointer: amzn.to/2P0wXxo
Festool Domino: amzn.to/35HfBM9
Little Bandsaw: amzn.to/2MV49nc
Table Saw: amzn.to/2MgDiBz
Large Bandsaw: amzn.to/2yud6uK
Painters Tape: amzn.to/2Mv3j1P
Disc Sander: amzn.to/2KxBeD0
Clamps(similar): amzn.to/2Iu20M9
★ WATCH MORE ★
Get Started in Woodworking: • Getting Started in Woo...
Solid Wood Pencils and Case: • How to Make Solid Wood...
Spline Jig: • How to Make a Spline J...
★ ALL THE LINKS ★
Music by Me: goo.gl/fgyup2
Patreon Support / Extra Content: / picciuto
T-Shirts / Books / Stickers / Plans: makesomething.tv/
My Other KZfaq Channel: / makesomething2
Making It Podcast: makingitpodcast.com
★ FOLLOW ME ★
/ drunkenwood
/ makesomethingtv
/ makesomethingtv
/ makesomethingtv
David Picciuto
PO Box 2499
Toledo, OH 43606

Пікірлер: 1 400

@shawnr888 4 жыл бұрын

I love the no nonsense approach to the video. He doesn't spend ten minutes talking about nothing, he just gets to it!

@rudyando 4 жыл бұрын

Agreed. I hate it. Even with recipes you’ll look something up and get 1500 words on the history of the recipe and how much their family loved it. Just need the recipe. Thanks!

@mike_98058 4 жыл бұрын

You must have missed the commercial from 5:09 - 6:39!

@kempster08 4 жыл бұрын

I agree! You know what, I don't even mind watching the advert because I feel like he deserves it.

@jomendez6929 4 жыл бұрын

bit like my love life ,, tiny fore play ,, then she starts the stop watch ,,

@daniellemeganhicban2896 3 жыл бұрын

agreed!

@elliottdmann Жыл бұрын

As a total beginner, this is incredibly helpful. Answered a number of questions I have about joining two pieces of wood together.

@donb6474 4 жыл бұрын

we used #10 on our coffee tables we made back in 68 but we had to measure the cut out and use a hand saw and a chisel. worked great. I have not seen that joint made since then. Thank You. #9 is my new favorite.

@jorgelimon964 4 жыл бұрын

Nice, so not only was.music great back then... So was carpentry

@davebauerart 4 жыл бұрын

I love that you just name them and go for it, no long explanations or strength comparisons, they all work.

@nemo227 4 жыл бұрын

I like a true dovetail, glued or without glue. Everyone has their own favorites. It's one of the things that make working with wood so interesting and beautiful. Oh, yeah, USEFUL too.

@myaccount9745 4 жыл бұрын

Also fairly easy and quick if you have a router table set up for it. Not a fan of doing them by hand.

@nemo227 4 жыл бұрын

@@myaccount9745 Yes, the dang set up sometimes takes longer than the job. Reminds me: I visited a cabinet shop to have them trim down some window shutters (back around 1963). It had been in town for several decades. I was surprised at how they had set up some simple table saws to easily and quickly do specific jobs. I was also impressed at how the old man there carefully double checked all of his measurements and calculations.

@myaccount9745 4 жыл бұрын

@@nemo227 Oh yeah there's a lot of 'secret' tricks in the trade and combined with skill people can do the craziest things with "simple" tools a hobbyist might not even be able to get done with all the niche tools we have today. It's crazy what some people can do with a circular saw, a drill and some hand tools and guides. I still like having a router and a table saw... I don't mind long set up times if it's built to last. If I make dovetails, it's probably meant to last at least a few years. Else I might as well use nails...

@nemo227 4 жыл бұрын

@@myaccount9745 Nails . . . nails . . . oh, yeah, those long metal thingies that some people use. (I'm old but still a smartass). I had a musician friend that took up wood working in his early retirement. He would have been a master craftsman. Our kitchen has several things he made: cabinet doors, cabinets, free standing pantry. He died a couple of years ago but the things he built are still here and a daily memory of his craftsmanship. BTW, do you make your living building or is woodworking a personal activity?

@glennwells6157 3 жыл бұрын

I didn`t intend to make use of this woodworking book, *TopFineWoodworking. Com* but rather curious about it. I had been truly amazed right after trying it. It never disappointed me in my wish to acquire more information about the art of wood working. Many topics were covered, including everything from wood types to developing your workshop.?

@FodderMoosie 4 жыл бұрын

I've been putting a little shelf together with a combination of dowels, hidden dowels, and mitered splines. Only thing is, only two of my 15 joints are at 90 degrees! So it has been a real adventure, figuring all of this stuff out. This has been a helpful video, thank you.

@mustafamirzaee9508 4 жыл бұрын

when did i ask

@donzemanovic4205 4 жыл бұрын

Best part of learning how to roll a joint? You get to smoke your mistakes

@leonardoasaro1832 8 ай бұрын

@@mustafamirzaee9508 🥶

@thetoughones 3 жыл бұрын

Dude looks like he's gonna be late for a meeting but still nails it.

@tvoovm7254 3 жыл бұрын

Heh, nails it.

@mikecove1 3 жыл бұрын

Late because he’s working on a joint and nailing some butt? He’s not the first.

@jamesclarke3248 4 жыл бұрын

Great video. Thanks! Agree with the others, you should strength test them and then rank accordingly.

@JkCanvas 4 жыл бұрын

Love that all the joints you showcased were made out of maple and the last one had the red maple leaf for the fall.

@williamellis8993 4 жыл бұрын

Thanks, David. I never stopped to count the different types of joints and variations. Using Miller dowels is another great method.

@DelenedeWetLientjie 11 ай бұрын

I'm so glad I found you. You're making it simple for this stupid. I need to make a somewhat padded headboard from offcuts, using just basic tools, a jigsaw and a drill. Arriving here gave me hope. Thank you

@stephenforde7140 4 жыл бұрын

Love the channel man, straight to the point in quick detail, no time to waste talking about the history of this and that.👍👍

@remynisce33 4 жыл бұрын

Wow love the hidden and visible mitered spline!

@tekviper9 4 жыл бұрын

Glad your bringing back some mild humor in your videos, I know you have mentioned in your podcast that you want to be taken more seriously , Just dont be too serious ! :) thank you for sharing your skills.

@jeffmackdesigns 3 жыл бұрын

Great little video! Love how quick you jumped in to it and started sharing your knowledge!

@bunberrier 4 жыл бұрын

You really get it, how to present information well, and quickly. Thank you!

@drumunl 4 жыл бұрын

Mitered Butt Spline is actually the name of my new album. 😂

@JusBidniss 4 жыл бұрын

Coincidentally, it's also the name of a medical condition I had taken care of last year!

@drumunl 4 жыл бұрын

@@JusBidniss 😂😂😂

@Carl-LaFong1618 4 жыл бұрын

they were big in the 60's.

@atlanteum 4 жыл бұрын

You mean that's not the name of some anime series on Netflix?

@ecr-9341 4 жыл бұрын

As civilization continues to devolve...

@indestruct1bl3 2 жыл бұрын

I like using corner clamps, then drilling a hole straight through both pieces at a 45" angle for a dowel, just glue it then just cut the dowel ends off, and sand smooth. I generally do this when I am using a lot of soft woods as even when I predrill holes, screws will split the wood near the ends if I look at if funny, haven't had an issue with dowels though.

@BDL090754 8 ай бұрын

I agree, exactly as the below comment, - No B.S. - No vanity "look at me" self filming. Wish there were more like you. Thank you

@dwighthapeman6590 4 жыл бұрын

Does my heart good seeing someone with tools by Sawstop and Festool doing plain old butt joints.

@victoreous626 4 жыл бұрын

LOL Like riding a Ferrari downtown in the stop and go at rush hour.

@peterkrajewski5942 4 жыл бұрын

Dwight Hapeman and what about pocket holes done on the weaker side?

@peterkrajewski5942 4 жыл бұрын

Dwight Hapeman or using metal hammer instead of a mallet?

@lydiaanderson0083 Жыл бұрын

@hello Dwight how are you doing?

@judam6113 4 жыл бұрын

GOSHDARNIT DAN! MAKE SOMETHING! Thank you two for making me laugh randomly from your videos

@WOODVY 3 жыл бұрын

kzfaq.info/get/bejne/esp0p9N_1suvoqs.html

@robertafreeman Жыл бұрын

I love the way he drops everything and backs away when he’s done. The ultimate mic drop! 🎤😂

@Ray-pr4vb 3 жыл бұрын

Thanks for your “snappy” explaining. Fun and craftsmanship combined 😃

@viejitaaa Жыл бұрын

Thank you!! So much information - very clearly shown, and explained directly and you get straight to the point! Very, very helpful

@kathrynnewton8721 4 жыл бұрын

Lovely! Too quick for me though! Love to see the final ones in slow mo for the beginner!

@petermcmillan1773 4 жыл бұрын

They were done so roughly that he didn't want to show them off. Misaligned and pretty terrible quality for a professional, video could also be called how-not-to-use-glue. I know these joints aren't for a customer but jeez. If I did pay this man for a glue joint, I'd like it to be fully glued.

@jamesbryson9542 3 жыл бұрын

You know you can slow any KZfaq video down?

@armandomartinezramirez560 4 жыл бұрын

¡Wow! Muy útil para quienes estamos empezando a aprender carpintería. ¡Gracias!

@Violetsteel_ 2 жыл бұрын

I literally had no need to watch this video but I loved the quick, snappy demonstration and now I know a bit more about wood joints. :)

@TeddyR_Official Жыл бұрын

Great video. Each joint has their own application. Having said that, the #3 pocket hole can be done better by having the holes outside rather than inner side of the joint. The screws should be pointing towards towards the board to grab more material.

@mar504 Жыл бұрын

Yup, if you are going to do pocket holes at least do them correctly.

@bmacaz Жыл бұрын

Absolutely, this is critical. And more leverage

@haunthunterify Жыл бұрын

Yes that joint he made is weak and will break easily. Outside is the way to go.

@jarrodderr 4 жыл бұрын

Butt joints. My 2 favorite things...👍🏻

@MakeSomething 4 жыл бұрын

Haha!

@Julian-ib8xn 2 ай бұрын

Watching this video was like speed dating for wood joints! Quick, informative, and left me wanting more! 😄

@Bob_Adkins 4 жыл бұрын

Straight and to the point, you assume the viewer knows the basics, which is refreshing. Thumbs up, and thanks!

@unionruines900 4 жыл бұрын

I've been working on some wine boxes lately so those mitered splines are looking promising.

@Katobats 3 жыл бұрын

The best tecnique ever more works less talk

@wagnerluis764 4 жыл бұрын

Hi, man...very nice this video... The last three plugins / examples, the ones I liked the most ... I will practice it and use them in future projects...thank you for sharing them 👍👍👍👍👍👍👍👍👍👍 Wagner ( from Brazil )

@WOODVY 3 жыл бұрын

kzfaq.info/get/bejne/esp0p9N_1suvoqs.html

@velocelt 4 жыл бұрын

So much fun from a basic tips video! It's great that you're indulging your inner shop-comedian.

@lydiaanderson0083 Жыл бұрын

@hello Freelancer how are you doing?

@californiadreamer5968 3 жыл бұрын

Wow! I had no idea. There is something about joining wood that fascinates me. It can turn a functional piece into a designer piece of craftsmanship.

@TakersplaceDeOfficial 4 жыл бұрын

I just made myself a plan to build some simple wooden boxes. Well, if that isn't perfect timing for this video :)

@varietyhub498 4 жыл бұрын

Do you actually need planning!?

@maxwellzimbardo4904 4 жыл бұрын

Just do it

@lytantai972 4 жыл бұрын

If you are one of those people who enjoys building woodworking crafts/projects and some basic carpentry skills this website will interest you in the same way that it did me. >> *TopFineWoodworking. Com*

@valterleao6795 4 жыл бұрын

Parabéns meu Amigo, adorei ver seu trabalho e suas habilidades! Abraço aqui do Brasil 🇧🇷

@josebenitez5904 4 жыл бұрын

excelente gracias por compartir tus conocimientos en madera.

@suelewis2864 3 жыл бұрын

Thanks for this video! I actually understood what you were talking about and I don’t know anything about building things out of wood! 😊

@sharonolsen6579 4 жыл бұрын

My favorite: Mitered spline .. I like the way it looks when you see the spline ... very sexy joint !

@Dsoginventor 4 жыл бұрын

sharon olsen , I have a friend who prefers this type of joint, too. He has trouble making good box joints, but mitered splines are easy for him.

@teddunagan4101 4 жыл бұрын

Not saying its the strongest but i think the hidden mitered spline is my favorite for being so seamless and unnoticeable.

@Denali_Rebel 4 жыл бұрын

I like that you can see it. I think it adds character

@stevenvachon9745 4 жыл бұрын

A dowel joint would be the strongest for those who are wondering (other than a dovetail through or half-blind) and is much easier obtained with a jig like the dowelmax. On a miter with a 45deg attachment on the dowelmax, you can drill through and have exposed dowels, an attractive alternative.

@ruankoen5947 Жыл бұрын

Im new to this type of work And a dowel just seams so weak Was surprised to read that its the strongest I mean look at how thin the dowels are

@nnprsl 3 жыл бұрын

I got here from 9gag by people talking about woodworking and mentions something like 'proper joint' but I love this video, it looks so fun! I'm not a woodworker and never ever do any woodworking in my life, but I subscribe to this channel because the contents are so good. Am I weird?

@bklock7 3 жыл бұрын

NICE. I made a new Playlist labeled "Woodworking" when I found this video ... 👍🏻

@lydiaanderson0083 Жыл бұрын

@hello Brian how are you doing?

@bluetorch13 4 жыл бұрын

10 min - 10 joints, PERFECT!

@acanadianwoodworker 4 жыл бұрын

1:55 Gaffer tape - one of the most helpful tapes around!

@jonwills1957 4 жыл бұрын

Love the look of that hidden miter spline!

@johnnyle5107 4 жыл бұрын

You are the wood artist my friend. It is not about getting the job done but getting it done beautifully.

@nathanmccook133 4 жыл бұрын

I personally really like the rockler beadlock jig

@BarkingIron 4 жыл бұрын

David, I’ve been a subscriber of yours for some time now. I enjoy how you don’t spend a ton of time spewing B.S. and you just get down to the point (project). I find your videos informative and reliable. There’s a lot of woodworking channels here on KZfaq and unfortunately a lot of them aren’t the best source of information. I look forward to your upcoming videos. Thank You

@TomRubicon5949 9 ай бұрын

Seems like I have a new set of skills to master! What a great video

@MechakittenX 2 жыл бұрын

Thanks for the video! I'm very new to woodworking and have 0 clues what to do, haha! I constructed a disaster today 😎Very informative but now it's time to learn more!

@zillpatel201 4 жыл бұрын

Thank you so much for posting! Exactly what I needed and very easy to follow and to the point!

@ALSTR330 4 жыл бұрын

Dang I was kinda hoping you’d test them until failure and rank by strength at the end.

@Yonatan24 4 жыл бұрын

I would send them over to Matthias Wandel but he has probably fainted from the sight of these pocket holes...

@Psychlist1972 4 жыл бұрын

Other folks have done those. You really need 3 of each to do a valid test. And pocket holes are more than fine for many joints. :)

@lar10101 4 жыл бұрын

Way easy to figure out. The strongest joint is the one that has the most gluing surface. The spline joint. I like the blind mitered spline joint, however as it's plenty strong, and is invisible.

@Psychlist1972 4 жыл бұрын

@@lar10101 Not necessarily. The spline joint goes from edge to edge on the wood and so makes it easier to lever apart. A tenon (loose, domino, or full traditional) is fully housed and so may actually end up stronger. Same with dowels.

@mattschoon6940 4 жыл бұрын

Yea that would have caught my attention and watch the entire vid

@nickthedrummer1579 3 жыл бұрын

Thank you for all of your help. I truly appreciate you.

@SARSteam 3 жыл бұрын

Off course I learned a bunch of new things LOL. This was awesome... Thanx for sharing!

@gitaramaker101 4 жыл бұрын

8:05 I thought you rewind it, second look I thought it's a magic trick! I like the spline joints, it looks neat, clean and strong

@j4nch 2 жыл бұрын

I would love to see a comparison of their robustness :)

@cassiejo0012 Жыл бұрын

I am new to woodworking and absolutely love it. I spend a lot of time learning all I can. I love this video and subscribed to you. I am trying to learn everything I can about joining wood. I want to make a chest for my grandpa. I have a question. I was interested in the pocket hole method and while looking at videos on it. I found someone who said to put the pocket holes on the outside for strength. I chose this joining way because in your video it was on the inside, so it would be hidden in the chest I want to make. Please clarify if I should use pocket holes on the inside or outside. Thank you so much and I can't wait to watch more videos.

@ricardoaguiar2241 4 жыл бұрын

I love hidden spline, thanks man.

@JupiterSequence 4 жыл бұрын

Loving that deep cut ween album playing in the background thanks for the helpful tips

@MakeSomething 4 жыл бұрын

Ween when they were awesome!

@alloyd8387 4 жыл бұрын

Would like to have seen a strength test for each type and then a suggestion on best use for each type

@rfrancoi 4 жыл бұрын

First question that came to mind.

@sunnydilyte 4 жыл бұрын

Yeah me too. Want to know which one is the strongest of all.

@turboragtop 4 жыл бұрын

What good does it do to show 10 types of joints without testing them for strength?

@rfrancoi 4 жыл бұрын

@@turboragtop Gotta agree with you...

@Kashed 4 жыл бұрын

For the ultimate strength I do a mitered spline with a hidden spline with dowels, bisquits, pocket holes, screws and plugs.

@harmless9012 4 жыл бұрын

And without a couple of nails it will just fall apart

@barrylast8655 4 жыл бұрын

Lol... is there any wood left?

@shmackbunz1917 4 жыл бұрын

@@luthfiatthariq8324 They needed some extra joint to handle that much butt

@JayReidy 3 жыл бұрын

Pocket Joinery: The best thing since the invention of the 45 degree angle :-)

@MakeSomething 3 жыл бұрын

For real! 🙌

@lydiaanderson0083 Жыл бұрын

@hello Jay how are you doing?

@spencer82rocks 3 жыл бұрын

That’s the cleanest workshop I even seen and looks like drive true spline plus 7 more,so fast I missed some of it,your amazing

@StumpyNubs 4 жыл бұрын

Tell camera man Dan a Domino is a loose/floating tenon. :)

@cameradan7648 4 жыл бұрын

Good point, you've earned a cold one.

@StumpyNubs 4 жыл бұрын

@@cameradan7648 - HA! A viewer!

@chaseowens1122 4 жыл бұрын

Stumpy Nubs you’re on it with all those computers at your new shop!

@StumpyNubs 4 жыл бұрын

@@chaseowens1122 - And all of them are tuned to the Make Something channel :)

@kennethgreer 4 жыл бұрын

What about the hidden dowel? Is that a floating tenon?

@josephawatson 4 жыл бұрын

am I the only one that giggles at butt joints still?

@randyrodriguez4643 4 жыл бұрын

You're certainly not alone!

@edmundolanderos6085 4 жыл бұрын

Thank you , I’m saving this video in my you tube history for future reference . - I will build a table and you just gave me lots of ideas.

@Ebaybbq 4 жыл бұрын

Thanks for sharing your knowledge

@Belboz99 4 жыл бұрын

I'd be really interested in seeing some stress testing on these joints... see which one performs best under a load.

@urbannpa 4 жыл бұрын

Pockets are the best if your not dovetailing it.

@c.garcia2363 4 жыл бұрын

Mathias Wendell already did the stress tests.

@purefury702 4 жыл бұрын

Colin @ woodworkweb did a bunch of tests kzfaq.info/get/bejne/bMlxiN2QyqnRkqs.html

@tmsmottl 4 жыл бұрын

When I saw the title I fully expected something on par with Jonathan Katz-Moses April Fools Day video. But nope, this was useful!

@jesustorres2583 4 жыл бұрын

beginner word worker here and this is invaluable info,thanks for sharing.

@robig1978 4 жыл бұрын

new to wood working and slowly getting more tools - loving that plug cutter as didn't know it existed cheers

@DennisNestor 4 жыл бұрын

2:02 love biscuits and gravy

@Gourmondise 4 жыл бұрын

When I was building my coffee table I used 60mm screw straight down the edge and I have filled up the holes with pine filler. After sanding and 2 layers of linseed oil everything looked like it was done with dowels. Everyone thought it was store bought as I have spent time with the finish. Later I have used the same technique on the dining table and the 4 seater bench.

@cheranth010864 2 жыл бұрын

Best video I've seen on jointing. Helped me a lot. Thank you.

@SaBhu10an 4 жыл бұрын

Pretty cool, but I know ten of you and I always love these !

@withthesehands5799 4 жыл бұрын

And here I was thinking, "there's no way there are 10 ways". Color me surprised. And impressed!

@Evgeniyart1 4 жыл бұрын

Спасибо за видео. Есть полезные варианты.

@gallahant 3 жыл бұрын

There are more than double that.

@chuckmaddox6725 3 жыл бұрын

well, face nail vs face screws and biscuits vs dominoes are basically the same thing. I call fowel :)

@chapmanry 4 жыл бұрын

"Here are 10 ways to do a butt joint. These last two are my favorite. They aren't *technically* butt joints tho. I don't know, we're just having fun. Can't we just have fun?"

@MakeSomething 4 жыл бұрын

right?!?! Thanks Raul!

@paolopedaria3942 4 жыл бұрын

yeah your right bcoz its fillet joint actually

@BraxtlyTools 4 жыл бұрын

Another dynamite video! Great stuff! We are definitely sharing on social media! Emmy Braxtly

@sanjoyroystravelblog5413 2 жыл бұрын

You whites peoples are perfect in every field of lives. That's why I respect you and love you. You are using so many machines here to do your woods works perfectly and hassle free.

@lydiaanderson0083 Жыл бұрын

@hello Roy how are you doing?

@Dogo24h 4 жыл бұрын

Very useful! Thanks for sharing!

@lauriepeters1336 3 жыл бұрын

Guys I am learning woodworking at *TopFineWoodworking. Com* I recommend this website all you guys who are beginner or advance in woodworking

@claytonhiga2778 3 жыл бұрын

LAURIE PETERS up

@shmookins 4 жыл бұрын

Missed opportunity to test how strong each one is.

@jorgelimon964 4 жыл бұрын

It's your job to make the video 🙏

@nafnaf0 4 жыл бұрын

Yes that is what I was thinking.

@gusuave007 4 жыл бұрын

I love your video. I am going to try some of those methods in my walk-in closet makeover project. Thank you very much for posting it. Do you think it's worth it to buy a pocket hole jig?

@kulkarnih5695 4 жыл бұрын

Thanks for sharing a good video. i don't have any of the tools you used what i have is drilling machine, Circular Saw and an angle grinder which is the best way i can get stong joint, i think the last one it just requires cutting using circular saw.

@AIMBOTKATFISH 4 жыл бұрын

would have liked to know the advantages and disadvantages of each.

@junkstough6622 4 жыл бұрын

I was hoping to see finger joints and dovetail joints as well

@michaelposey6529 4 жыл бұрын

I very much appreciate the exaggerated care you took getting the spline piece off the table saw, even though it's a saw stop. Coming from someone who was the average youtube woodworker a year ago, so so many people have table saws that have no business having one. Subbed

@MakeSomething 4 жыл бұрын

Thanks Michael!

@Aspenrayne 3 жыл бұрын

i love your work bench!

@lydiaanderson0083 Жыл бұрын

@hello Phillip how are you doing?

@katzmosestools 4 жыл бұрын

I like big butts and I can not lie

@MakeSomething 4 жыл бұрын

Oh we know Jonathan! Us other woodworkers can't deny.

@chrishand259 4 жыл бұрын

This is where Jonathan takes off his glasses and says “stop it!” 🤣

@KevinLitman 4 жыл бұрын

8:05 - Welcome to Make Something with me, David the Magician Picciuto

@kennethgreer 4 жыл бұрын

It's a good example of kickback.

@tiddlesthatsmycat 2 жыл бұрын

Looking here to make boxes for my cat tree. Shall follow even though you really are more advanced than I am but just watching I have gained confidence and starting my boxes tomorrow. Thank you

@rosemeirevargas2631 3 жыл бұрын

ótimas dicas obrigada...gracias.

@kritikopedo 4 жыл бұрын

Should have put them in the vise after and smacked them with the hammer to see which one ended up being the strongest joint

@EdBrentnall 4 жыл бұрын

I came here expecting to find novel ways to smoke. However, I was not disappointed. 👍

@skipguenter3711 4 жыл бұрын

If you can find the Porter Cable bench mount ... It's got several advantages over the Kreg plastic.

@DI43EL 4 жыл бұрын

Nice! 10 ways in 10 minutes. No time wasted

@bobt7484 Жыл бұрын

Well done! I love the 'handsaw' guide for your table saw!

@mrjroeder 4 жыл бұрын

Follow up video: strength testing to see which joint is strongest?

@cdouglas1942 4 жыл бұрын

job for Matthias Wandel

@matthewsnowdon8530 4 жыл бұрын

Sadly these machines cost lots of money that most of us don’t have

@jjvaliquette1 4 жыл бұрын

@yvonbellemare5734 4 жыл бұрын

i like very much your works,"professional"

@jakenuno9900 3 жыл бұрын

What would be good for 1" x 4" basewood baffle frame to hold about 100lbs of total weight? I've simply used glue and screws in the past, but I'm interested in upping my game to a more quality build this round. Thanks for the info and great video!

@havenisse2009 4 жыл бұрын

There's also the IKEA way: have a round metal dowel with threads and insert a long-ish machine screw to pull things tight. A few small dowels to control position.

@nicosgeo 4 жыл бұрын

Can you state IKEA part number?

@harrison298 4 жыл бұрын

@@nicosgeo They're called "cam lock screws." Do a search for that in google images and you'll recognize them if you've built anything from IKEA.