Making a 4 Stroke Engine. Episode 2

Making a 4 Stroke Engine. Episode 2 - Gear & Valve

Рет қаралды 723,770

Күн бұрын

In this second episode of the 4 Stroke Engine project, I’m making a Valve, Valve Housing and Gear.
I hope you enjoy this as much as I do!
--------------------------------
Episode 1 : Piston and Connecting Rod - • Making a 4 Stroke Engi...
Episode 3 : Crankshaft and Camshaft - • Making a 4 Stroke Engi...
Episode 4 : Engine Block and Cylinder Head - • Making a 4 Stroke Engi...
Episode 5 : Carburetor, Flywheel - • Making a 4 Stroke Engi...
Episode 6 : Final Assembly and First Run - • Making a 4 Stroke Engi...
--------------------------------
Mechanical Drawings & Tools I Use - www.maker-b.com
Thank you for watching this video :)
#Engine #Valve #Gear

Пікірлер: 196

@MakerB 6 ай бұрын

Episode 3 : Crankshaft and Camshaft kzfaq.info/get/bejne/atZ5g9WjyN2xYHk.html Episode 4 : Engine Block and Cylinder Head kzfaq.info/get/bejne/nKt-jNiUrJepiZc.html Episode 5 : Carburetor, Flywheel kzfaq.info/get/bejne/bZqjicqdtamdm6M.html Episode 6 : Final Assembly and First Run kzfaq.info/get/bejne/n9mlntZ_3tewmmw.html Episode 1 : Piston and Connecting Rod kzfaq.info/get/bejne/jtCcicpzvsvMYJc.html Episode 2 : Gear & Valve kzfaq.info/get/bejne/bL1xetaYyajKhGQ.html

@hendroprasetyo9814 2 жыл бұрын

That's what I love. No music, just some of assembly noise.

@stratocaster1greg 4 жыл бұрын

I have been making sprockets for chain drive toy steam trucks. Using my Atlas shaper its a long process. I use a Southbend Indexing Center and manually crank it around for the next tooth. I also ground the form tool. I am amazed how fast you made those gears and your little lathe indexed itself for each cut. Thats a big accomplishment making gears. Hats off to you young man. The world needs more like you. God Bless Us All.

@jho3623 3 жыл бұрын

Ill be 190yrs old before i grasp this kind of patience. Amazing work.

@hifiteen49 3 жыл бұрын

you don't need a lot of patience, you can just grab a magazine while it's doing it's thing. As long as you stay near for safety and glance over every now and then you're good.

@amsaveni8065 3 жыл бұрын

You are the one who is not forcing to subscribe. Makes very accurate,even small gears. Thank you so much 😊

@webdes03 4 жыл бұрын

There's something so soothing and relaxing about watching these. Amazing work, and the attention to detail is 10/10.

@MakerB 4 жыл бұрын

Glad you liked it!!!

@baguettefish 3 жыл бұрын

The attention to detail isn't 10/10 but 100/10

@Machtri343 4 жыл бұрын

These are soooo freaking cool to watch. Just the level of meticulous accuracy required and the super pleasing payoff is just so fascinating

@MrAlex3461 3 жыл бұрын

Machtri look up “Brunel and the dawn of precision”

@Samford404 4 жыл бұрын

I wish I could see daily videos on your channel, the are so peaceful and nice to watch.

@pjhalchemy 4 жыл бұрын

Really nice chips! Almost perfect cutting! Enjoyed this very much. Looking forward to more and the final!

@MakerB 4 жыл бұрын

Glad you enjoyed it!!

@Welcometofacsistube 3 жыл бұрын

As a professional machinist, you do great work

@alvarop5464 4 жыл бұрын

WoW, this video is very relaxing

@corlucassen1064 4 жыл бұрын

Beautiful video showing beautiful produced products.

@nocnylis5904 4 жыл бұрын

It is chilling af!! please more!

@housdrmoon 4 жыл бұрын

very delicate work!!

@musamazhit7653 4 жыл бұрын

hello from Germany!! Your videos are awesome

@Atupaitea 4 жыл бұрын

can't wait thw whole ep..✌️😁👍

@brucebello9892 4 жыл бұрын

Love your videos, thank you!

@MakerB 4 жыл бұрын

Glad you liked it!!

@hifiteen49 3 жыл бұрын

I gotta say; This is amazing. Thanks for existing.

@Templarfreak 3 жыл бұрын

as a pretty big mechanical noob, holy shit. i did not know you can just _cut a gear_ like that, i always assumed they had to be molded or cut in a more slow-and-old-fashioned way (like, cut out a tooth, _then_ rotate, then cut out the next, _then_ rotate, etc). that actually kinda blew my mind how that just _works_

@alexanderbanman9288 4 жыл бұрын

I'm enjoying these.

@machab2810 3 жыл бұрын

Awesome project!

@fabricio512 4 жыл бұрын

That's my type of ASMR haha

@YooProjects 4 жыл бұрын

Amazing project! Thx 🍻👍🤩

@exocat4164 Жыл бұрын

I find it interesting that he decided to have the valve guides and the valve seats combined in one piece. There's nothing wrong with it, it's just kinda neat

@humancattoy7767 3 жыл бұрын

I think you just made Westley Treat weep with envy.

@janwiedemeijer 3 жыл бұрын

Fascinating!!!

@craigjones2015 3 жыл бұрын

I can't wait to see it run

@BXBvlog 2 жыл бұрын

👍👍

@DumbCarGuy 3 жыл бұрын

Maker B should put a counter on his on/off switch. I bet the number would be staggering.

@bigtoe4411 Жыл бұрын

An awesome skill!

@derekgee4223 4 жыл бұрын

Great video , thanks for sharing. Would like to know what equipment you are using

@MuhammadDaudkhanTV100 4 жыл бұрын

Excellent working good experience

@robertl5440 4 жыл бұрын

Parabéns, peças perfeitas, maquinário magnífico.

@bimacz 4 жыл бұрын

Gresy video ! Thx ! I love it❤️

@ohken2619 4 жыл бұрын

I am very interested in the process of making and the role of machine tools!

@JohnSmith-ey6zs 2 жыл бұрын

I'm loving that lathe chuck that you can seamlessly interchange as a workholding vise with all your other machinery. What the hell is that setup?

@thisolesignguy2733 4 жыл бұрын

Man I love to watch you work, the tolerances are just so precise they have to be +/- .0001 or better. It's just an extreme pleasure. Please keep making more!

@MakerB 4 жыл бұрын

Glad you liked it!!!

@muralirao5481 4 жыл бұрын

Please make part 3

@misterhash9329 4 жыл бұрын

Already subscribed and waiting for the next video :)

@David-yo5ws 4 жыл бұрын

It's gearing up to be a great engine. ;-)

@coilmotorworks 4 жыл бұрын

Great videos! I hope this inspires someone to try out this great hobby!

@radosawbrzezinski4161 2 жыл бұрын

Well it did, im setting up workshop Do you know where i can get plans for an engine?

@coilmotorworks 2 жыл бұрын

@@radosawbrzezinski4161 Do a search for Bob Shores on ebay. There are some reasonably priced casting kits with plans. Bob Shores was a great man who produced some fantastic engines and kits so anyone could build them.

@thetruejay20 3 жыл бұрын

Impressive

@asicerik 4 жыл бұрын

I love watching these videos. Makes me want to go out and buy a lathe! One question, I don't see you taking any measurements. Are those all off camera? Or are you using the lathe dials? Thanks

@alexrogers9086 3 жыл бұрын

Probably a bit of both

@risingsunflagsamemeaningas7472 3 жыл бұрын

It's hard to make without a measuring instrument. (Vernier Calipers, micrometers) Precision tolerance is mandatory

@CShellby 4 жыл бұрын

Have you ever make any engines before? I also love your videos! Good work!!

@xile6 3 жыл бұрын

Like i know the machine does 95% if the work. but you till have to tell it what to do and plan out all the dimension. great job. thumbs up

@ardaplbyk 4 жыл бұрын

Good job ;)

@rebmcr 4 жыл бұрын

Her: Come over Me: I'm busy milling metal parts Her: My parents aren't home Me: 1:05

@andrenovelliromansl 4 жыл бұрын

Hahahahah

@easymedia7988 3 жыл бұрын

🤣

@devonfretwell3351 3 жыл бұрын

So funny🙄

@AaronGarcia98 3 жыл бұрын

💀💀😂

@wow-hn5qc 4 жыл бұрын

숨은 고인물 이셨군요...

@kendrijosebarbershop6218 3 жыл бұрын

Que gran trabajo me encanta ver estos video algún día quisiera tener mi taller así con todas sus cosas para hacer cosas así

@ctrain226 4 жыл бұрын

Cant wait to see this thing rip

@zihwaza 4 жыл бұрын

빨리 다음거 주세요!!

@soolsamchon 3 жыл бұрын

어허이 ㅋㅋㅋ 드뎌 여기 오셨군여 ~

@f250freak6 3 жыл бұрын

I wanna see this little engine an action

@rock3tcatU233 4 жыл бұрын

I'm jealous of lathe people, working a lathe seems so satisfying compared to a mill.

@thetraitor3852 4 жыл бұрын

It looks absolutely amazing. I am looking forward to see future parts. Just curious, why didn't you use piston rings in the previous video?

@keenices1972 4 жыл бұрын

Maybe he would use them later.

@David-yo5ws 4 жыл бұрын

@Eddie Hitler Thanks, had a little noesy. 👀

@jacojansevanrensburg6588 4 жыл бұрын

Awesome video. Can you please tell me the name of the lathe

@mechanicalengineeringboile4389 3 жыл бұрын

Nice video

@andrenovelliromansl 4 жыл бұрын

Another great Episode! Counting down minutes to the next one. Amazing job with the lathe. Pls can you share your lathe model and brand?

@Bazzdiver 4 жыл бұрын

Take a look in the description ;)

@andrenovelliromansl 4 жыл бұрын

@@Bazzdiver thank you! I usually watch youtube videos on the tv so, I almost never see the description. Thanks for the tip! Amazing tools!!!

@rickpalechuk4411 4 жыл бұрын

Nice

@rayhanpattuary1870 4 жыл бұрын

bro plz make this type of content It will grow ur channel very fast

@user-yu7rb8pb8u 3 жыл бұрын

ดีมากเลยครับ ผมชอบมาก ทำต่อไปนะครับ

@anubisu1024 4 жыл бұрын

I was so surprised when I saw the spinning part turned. I didn't know that mechanism even exists.

@ramaaramaa 3 жыл бұрын

Taig Micro lathe

@firearmsstudent 3 жыл бұрын

Will there be plans available? I have some bigger machines and a 2x or 3x would be neat to build.

@crisp4085 4 жыл бұрын

Where do you get your round bar its soo hard to find in australia

@RC_Club 4 жыл бұрын

hi ! please share the plans of the engine !

@satrialindu322 4 жыл бұрын

Hi my from indonesia,I Like You Video

@MyxamopMike 3 жыл бұрын

Could you show us a picture or explain how you mounted the tool post to the sherline lathe, I have their lathe but i cant figure out how to mount the tool post.

@Rinat928 4 жыл бұрын

Cool😃👍

@moloymitra4164 4 жыл бұрын

When is the part 3 coming???

@samirsamir7779 3 жыл бұрын

I love your videos , I subscribe , please what is the yellow metal used in the video and where to buy it ? thanks

@BXBvlog 2 жыл бұрын

👍👍

@brielov 4 жыл бұрын

I need more

@muralimanohar8952 4 жыл бұрын

@Maker B When will all the videos be out?

@TheBest-ko7uf 3 жыл бұрын

Good

@who_is_john_galt 3 жыл бұрын

I didn't understand where the mixture is gonna come in from that valve housing... Are you going to mill an opening on the side of it later?

@camaroboy383 3 жыл бұрын

I was thinking the same thing initially, but if I had to guess, he will secure the seats/guides into the cylinder head, then machine the ports after assembly...

@krishnasubramanyam8629 3 жыл бұрын

Pray tell us this.... are these cuttings and drills involve a precision computer program? if so, please share the details.

@halfnelson6115 3 жыл бұрын

Are those clock making tools? I've never seen lathes or mills like that before.

@marceloho1984 3 жыл бұрын

Yep. But in almost the cases, os easier and cheapier to buy tools and parts.

@kevinstaddon8517 3 жыл бұрын

Looks like Sherline

@remixtrap6042 4 жыл бұрын

Waww nice

@suliemanalfuhaid1447 3 жыл бұрын

What keeps the valve from leaking

@DD_yura 4 жыл бұрын

天下のミツトヨじゃーん(工高生感)

@jagooding 3 жыл бұрын

What rotary axis / indexer are you using for milling the teeth?

@kentuckytrapper780 4 жыл бұрын

What kind of lathe is that? It's very precise.

@BXBvlog 2 жыл бұрын

👍👍

@Epicalogical 3 жыл бұрын

Great video. What is the machine called that is used to cut the gears?

@elburropeligroso4689 3 жыл бұрын

It's an electric rotary table/indexing head. Manual indexing heads are fairly common and have a specific numbers holes on a plate that correspond to the number of teeth you might be looking to cut on a gear. Look up Chris and his channel, ClickSpring. He has a video on manual indexing/dividing.

@Epicalogical 3 жыл бұрын

@@elburropeligroso4689 Thank you, I will check out that channel

@elburropeligroso4689 3 жыл бұрын

@@Epicalogical Here is an indexing/dividing head. www.grizzly.com/products/grizzly-dividing-head-bs-1/g1054

@filmfbi2976 4 жыл бұрын

Fcจากไทยยยย

@CrSys1 4 жыл бұрын

👍👍👍

@playlistkurniawan2318 3 жыл бұрын

What lathe machine do you use?

@user-se1wz9qf2j 4 жыл бұрын

Gold Hands....진짜 최고 금손.....ㄷㄷㄷ

@zugly1999 4 жыл бұрын

what kind of gear tooth profile are you using? The size of the cutter looks like its a cycloidal cutter that's used in watchmaking, but i assume you're using the normal involute tooth profile.

@BXBvlog 2 жыл бұрын

👍👍

@KM6VV 3 жыл бұрын

What gear cutter was used?

@juraassem9035 4 жыл бұрын

превосходно

@zaferaksoy2775 4 жыл бұрын

I like your works. I'm curious about the machines you use. I would be glad if you share your brand and model with me. I also want to buy these machines. practical and useful machines.

@pierrickreveillere3768 4 жыл бұрын

His tools are all in the info box below the video ;)

@jimmy2times 2 жыл бұрын

What milling and lathe machines are you using?

@SKTechnology44RUS 4 жыл бұрын

Экселент )

@bolb012 4 жыл бұрын

Which lathe are you using

@steadfastkil1582 4 жыл бұрын

making a mini car ?

@BXBvlog 2 жыл бұрын

👍👍👍👍👍👍👍👍👍👍

@theavatar9375 4 жыл бұрын

What's the type of your lathe machine sir?

@David-yo5ws 4 жыл бұрын

Just under the video is Maker B comments and there is a 'click' on saying"show more", click on that and it shows links to all the machinery.

@hyperrunner4589 4 жыл бұрын

What is the name of cutting gear tool

@karanapupravallika3570 3 жыл бұрын

Ur videos are awesome and more interesting.😁.. Any one out there, i am mechanical engineering student could you suggest some you tube channels similar to this channel that might help me to gain more knowledge ... #from INDIA🇮🇳.

@BXBvlog 2 жыл бұрын

👍👍