You would not believe how much this has already helped me, thanks!
@DIYKAI3 жыл бұрын
Your welcome!
@atomic2722 жыл бұрын
Glad there are people like you 🙂
@DIYKAI2 жыл бұрын
Thanks! Knowledge is only good if you share it!!
@meditationlife93373 жыл бұрын
Smoothing map its very helpful understanding hts colums and good settings.Thanks so much Brudasssss.
@DIYKAI3 жыл бұрын
Your welcome I'm doing some more repair videos if you haven't already subscribed please do
@meditationlife93373 жыл бұрын
@@DIYKAI l am gonna follow you :)
@alexholmes95213 жыл бұрын
Really informative step by step video bud look forward to the next
@DIYKAI3 жыл бұрын
Thank you! The next one will be actual chip burning and what devices I use.
@alexholmes95213 жыл бұрын
@@DIYKAI exactly what i wanna see haha doing a z6 turbo build the next coming months so yourll be helping massively
@hondaland_3 жыл бұрын
Great 👍 basemap video and explanations!
@DIYKAI3 жыл бұрын
Thanks! 👍
@DIYKAI3 жыл бұрын
Sub to my channel more to come!
@hondaland_3 жыл бұрын
Subbed up
@DIYKAI3 жыл бұрын
Same
@woodsonking3 жыл бұрын
Thanks for the vid really helped my understanding in the next vid could you possibly show the gear need to write to the chip and some data logging if possible I gave you a sub bro nice vid ✊🏾
@DIYKAI3 жыл бұрын
Your welcome, yes absolutely the next video will show how to write the file to the chip
@hondaland_3 жыл бұрын
I have a old datalogging one I made if you want to check it out. I will make new ones.
@yaboygerry3 жыл бұрын
Greatly appreciate it! Not many videos on on to use HTS. Thank you! Will you do a video on setting up 2 step?
@DIYKAI3 жыл бұрын
Yes more videos to follow in order next will be burning a file to chip, then datalogging and so on. Stay tuned! Thank you!
@hondaland_3 жыл бұрын
I have a few videos on hts as well if willing to spend the time to watch. One is on popcorn decel
@codewaterairsoftandmore10503 жыл бұрын
So true, there are not really any in depth tutorials on hts which is surprising.
@franybotesh674 Жыл бұрын
So dumb question I haven’t downloaded the program yet so it bolted on anything, so I’m running stock engine as can be My question is in the videos I’ve seen it looks like I can adjust the injectors and put a launch control, is there any benefit for my f22b1? I plan to put in a bigger fuel pump and change the injectors to about 400cc or so I just didn’t know if it’s advisable I wanna push it as far as it can go without cracking the block or anything
@DIYKAI Жыл бұрын
If your motor is stock then tuning is not required, hard launches will break things lol
@franybotesh674 Жыл бұрын
@@DIYKAI that’s fair I can see that I plan a tear down and want to build it back up, but from what I’m seeing finding parts that are budget friendly and finding things compatible are hard For the most part stock parts like timing and gaskets are easy but I do want to find forged pistons heads and rods maybe bore it out a bit but I don’t see it adding much hp I see kits for springs and plan to send my camshaft and rockers to delta cams to make it a stage 2 Eventually it’ll get there but first I want it to pop
@DIYKAI Жыл бұрын
If you just want the snap crackle pop……make sure you are ready to replace the catalyst if short time unless your running straight pipe then your fine
@franybotesh674 Жыл бұрын
@@DIYKAI well I thought about hollowing it out and spacing the 02 sensor to prevent a code but that’s a no no and I don’t recommend anyone doing that 😉 But mines a 97 so I’ll still need emissions but I’m definitely leaning towards bigger injectors and replacing fuel lines and pump since it is a 20+ year old vehicle
@ryan_widdoes3 жыл бұрын
If you would be using a chip burner how do you burn chip?
@DIYKAI3 жыл бұрын
kzfaq.info/get/bejne/l7xoZMmCt7TTmKs.html
@DIYKAI3 жыл бұрын
kzfaq.info/get/bejne/j9CGZJl7nqy5ZGw.html
@sethowen37282 жыл бұрын
well this video has aged but i have a d16y7 what engine should i select in the basemap creator or am i not supported?
@DIYKAI2 жыл бұрын
You can use z6 map and turn off vtec and adjust from there
@sethowen37282 жыл бұрын
@@DIYKAI sweet thanks man. abought to lock vtech in my engine so im gona need to tune
@DIYKAI2 жыл бұрын
Your welcome make sure your have a wideband o2 to monitor everything
@righty-tightybuilt5482 жыл бұрын
I can't get my car to start.. the check engine light goes on only when I step on the gas and goes away when I let off to try and start it when it cranks.. but I noticed I can't calibrate my tps sensor only let's me check the box to set a custom tps value.. I set my decapped ls injectors at 450cc and deadtimes to rc750cc 12ohms and took out my resistor box.. its what huntertuned told me to set them at
@DIYKAI2 жыл бұрын
So many variables…motor set up? Ecu type? Stock TPS and map? Built motor? Turbo?
@righty-tightybuilt5482 жыл бұрын
@@DIYKAI stock motor stock f23a block with stock f22a head. Obd1 chipped p06 non vector ecu, using honda tuning suites. Just installed turbo, hunter tuned decapped ls injectors, quantum 255lph fuel pump, stock fuel pressure. I set the com ports to com4 and com3 and I am able to connect the data logger now and the tps is able to calibrate also but still no start but my battery died so ill have to wait to try again..
@DIYKAI2 жыл бұрын
@@righty-tightybuilt548 yes fully charge the battery and leave it hooked up until started and running.....as far as everything else pull the plugs you may have to adjust the fuel tip in at start-up.....also make sure you calibrate the TPS otherwise things can be off then get your base timing dialed in
@MarkRensoSoriano3 жыл бұрын
Thanks for this dude can i ask something? What happened to engine if u dont know how to tuned?
@DIYKAI3 жыл бұрын
Your welcome. So alot can happen from not starting to running lean to rich.....get a wideband if you start messing with anything you need to watch AFR stock is 14.7
@DIYKAI3 жыл бұрын
With that serious damage can occur from bent rods to broke ring lands or pistons.
@MarkRensoSoriano3 жыл бұрын
Thanks for this bro i watching ur videos right now without skipping ads thankyousomuch broooo! ☝️💥
@DIYKAI3 жыл бұрын
@@MarkRensoSoriano your welcome let me know if you have any other questions
@tomarun66243 жыл бұрын
Can i use Honda tuning suite on a demon2
@DIYKAI3 жыл бұрын
I think so
@darbats3 жыл бұрын
hello, where I can get the software to download?
@DIYKAI3 жыл бұрын
What country are you in?
@darbats3 жыл бұрын
@@DIYKAI phlippines
@DIYKAI3 жыл бұрын
If you can Google HTS
@darbats3 жыл бұрын
@@DIYKAI thanks
@earlskie78castillo773 жыл бұрын
Will this work to honda fi motorcycles?
@DIYKAI3 жыл бұрын
I am not sure sorry
@DIYKAI3 жыл бұрын
As long as you using one of the listed ECUs it should
@meditationlife93373 жыл бұрын
Sir could you make a video about p29 ecu launch control and popcorn setup.Thanks a lot .l need help so could you give me your email adresss for ask something p29 ecu remap????
@DIYKAI3 жыл бұрын
Hello I do not have a p29 but can make a similar one on a p28. To make a basemap you just find the ecu code the closest in your case p28
@meditationlife93373 жыл бұрын
@@DIYKAI l make a p29 basemap with honda tuning suite software But l cant make setup low high cam settings injector iggination setups.just Hts' p29 stock rom basemap enough for car or we must setup fuel and iggnation settings?
@DIYKAI3 жыл бұрын
@@meditationlife9337 it's enough to start the car but you need a wideband o2 to tune it and datalogging
@goncalofonseca59353 жыл бұрын
Am I the only one who can't enlarge the windows and can only read half of what's written inside????
@DIYKAI3 жыл бұрын
Not sure when I do I can? What device are you watching on?
@goncalofonseca59353 жыл бұрын
@@DIYKAI I was referring to HTS... I've tried to get familiar with it but the windows aren't showing everything... For example on the settings window where you choose the units displayed for the various tables/ graphs it only show half of what's written... I can't enlarge any of the windows.... I've tried the cursor on every corner and nothing happened... I've looked for a solution online bit it seems that it's just me who can't make them bigger.... I've tried 3 versions of HTS without luck....
@DIYKAI3 жыл бұрын
@@goncalofonseca5935 never experienced this🤔 and you cant enlarge by dragging at the center of the window line?
@goncalofonseca59353 жыл бұрын
@@DIYKAI I just tryed the corners... I'll try dragging on the center as you suggested.... Thank you for the tip...
@DIYKAI3 жыл бұрын
@@goncalofonseca5935 cool lmk if it dont work I can try to help some more