Making a Climbing Volume
Рет қаралды 15,292
Күн бұрынThere is something magical in taking an idea in your mind and making it real and unique with your own hands. The process may sometimes be long and tiering but the result is always worth it!
Here's a short video introducing my process of creating a simple climbing volume. From a computer sketch to a competition boulder at the gym. Enjoy! 💪
Music: Here We Go - Imperss Music (Original Mix) [2021] FreeDL By Imperss Music is licensed under a Creative Commons License.
#climbing #climbingholds #diycrafts #ככהזהבונגה #diy #woodworking #bouldering
@faisolrahman6751 Жыл бұрын
best...Thank for sharing...
@darshabi5393 2 жыл бұрын
אדיר!😍
@NortenhosEscalada 2 жыл бұрын
Great!
@sasontheking44 2 жыл бұрын
וואו, מגניב!
@Mienso000 2 жыл бұрын
Hey a technical question - what's the grain size for aluminium oxide? thank You
@crhclimbing Жыл бұрын
I've heard that 60 grit is good, I am going to try 180 grit out because it's what was available
@paulyD62 Жыл бұрын
I use 80 or 90 grit, i used 60 grit once but found it too coarse and dangerous for the skin
@Ryuchimichin Жыл бұрын
thx for the video. In the holes to anchor to the wall (1:35), do you use some type of bushes to reinforce? I did a test with a low quality wood and the screw broke it, I think I had to install some zinc-coated iron bushes to reinforce it.
@VengaClimbingGym Жыл бұрын
Yes. I use These: escapeclimbing.com/collections/hardware/products/volume-screw-insert
@KayzImagine 2 жыл бұрын
Do you dilute the epoxy paint alot ?
@VengaClimbingGym 2 жыл бұрын
This one I mix with ~20% thinner, but sometimes I use Polyurethane Lacquer that is much thinner and needs no dilution at all.
@KayzImagine 2 жыл бұрын
well i tried to use pure epoxy that i color myself that's why! i just wanted to know, where do you get your aluminium oxide sand ? mine isn't as shinny as yours. i don't know how to get those shinny grains on my last coat?
@KayzImagine 2 жыл бұрын
@@VengaClimbingGym are you here ?
@henrymunnich1648 Жыл бұрын
@@KayzImagine Which paint do you use?
@Helios-ul1fs Жыл бұрын
dude, what kind of paint did you use?
@henrymunnich1648 Жыл бұрын
Did you ever figure out what paint to use?
@TheHavenlover 2 ай бұрын
what screws do you use to hold the seams together?
@VengaClimbingGym 2 ай бұрын
Usually 40-50X4mm wood screws.
GG Cinema
Рет қаралды 1,5 МЛН
AKIpress news
Рет қаралды 4,8 МЛН
Escape Climbing
Рет қаралды 21 М.
Climbingworkouts
Рет қаралды 305 М.
Southern Boulder
Рет қаралды 35 М.