Making A Coin Ring With Harbor Freight Tools

Рет қаралды 161,300

3 жыл бұрын

linkup.top/coinringmaker
Thanks for watching my video. I'm Coin Ring Maker and I make coins into rings. If you would like to see more of my work check out my shop link below.
Coin Ring Store
buycoinrings.com
Learn How To Make Coin Rings By Following Me On My Coin Ring Making Journey!
coinringmaker.com/
COIN RING TOOLS I USE
coinringmaker.com/recommended...
Etsy Shop
www.etsy.com/shop/TheCoinRing...
Get $15 credit when you sign up for whatnot, the live collectibles auction app
whatnot.com/invite/coinringmaker
Apply to sell today on Whatnot!
www.whatnot.com/invite/seller...
#coinringtool #coinringmaker
#coinring #howto

Пікірлер: 98

@pauldejesus9644 3 ай бұрын

wow one of the best and cheapest ways to make a ring wish i would have seen it 3yrs ago thx for posting

@CoinRingMaker 3 ай бұрын

Thanks for watching

@tammygurl64 Жыл бұрын

That's really cool! 😎 Btw, 1964 was the last year quarters were made from silver. In 1965 quarters started being made from copper and nickel. Thanks for the demo!👍

@Blinkerd00d Жыл бұрын

I was thinking the same thing when he said that- he might have been thinking of half dollars which from 65-70 they reduced the silver content from 90% to 40% before they finally went to using the copper nickel.

@terryswails1191 3 жыл бұрын

I love the simplicity of the tools and your willingness to share with us the knowledge you have gained in your journey of making coin rings, your explanation of each part of the process is clear and enlightening, thank you very much.

@CoinRingMaker 3 жыл бұрын

I’m happy to be helpful 😁

@ruthmoldan5523 9 ай бұрын

Very cool! Thanks for sharing!

@CoinRingMaker 9 ай бұрын

Thanks for watching 😎👍

@alexanderdavis5332 Жыл бұрын

Liked the video. Pretty cool website. And great links! Thanks for the time you have put in! I’m definitely ordering tools and doing this! You make it look easy!

@CoinRingMaker Жыл бұрын

Glad it was helpful, I need to update my tool list. Lol

@alancook2752 2 жыл бұрын

My first tools. They work

@tyronejohnson3652 2 жыл бұрын

Great video, but you got to rename it. How to make a coin ring with tools from everywhere.

@CoinRingMaker 2 жыл бұрын

😆

@owenwoodard4108 2 жыл бұрын

Sweet!!!

@CoinRingMaker 2 жыл бұрын

Thanks

@simonlinser8286 Жыл бұрын

i didn't know they had a die set that's cool. cool video.

@CoinRingMaker Жыл бұрын

Thanks

@DRAGNET-pn5vf 3 жыл бұрын

LOOKS GOOD, THANKS FOR SHARING WHERE YOU GOT THE TOOLS AT.🇺🇲👍

@CoinRingMaker 3 жыл бұрын

For sure! Glad I was able to help. I have a full list of recommended coin ring tools at www.coinringmaker.com

@larrycroft6819 8 ай бұрын

Use a plastic or wooden mallet to knock out the piece that you hammer on when removing it so you don't mushroom the end. Enjoyed your presentation.

@CoinRingMaker 8 ай бұрын

Thanks! I’ve definitely switched to a plastic hammer

@mje1625 2 жыл бұрын

I agree! I like the roughness of the ring, too. I've watched videos where the person makes a ring then polishes the it to the point of perfection. And that's fine, but it looks too store-bought. The rough look gives it a more industrial, vintage look. Nice job! I would have liked to have seen how you actually reduce the size rather than saying how it could be done.

@CoinRingMaker 2 жыл бұрын

Thank you 😁

@samTollefson Жыл бұрын

Great video! I checked out your catalog of beautiful rings and such and have a suggestion for an item you could add to your line. I have domed coins and soldered the male side of a brass/bronze snap inside the dome so it can be pressed to make a coin snap for jackets, leather pouches, etc. I don't make them to sell but have gotten nice comments from people that see them. They would be quick and easy enough to add to your line! Good luck!

@CoinRingMaker Жыл бұрын

Great idea!

@user-sy4ef9cz4l Жыл бұрын

Top!

@CoinRingMaker Жыл бұрын

😎👍

@alfredhummer4396 3 жыл бұрын

Would like to get a list of tools needed and where I can purchase them. Thank you.

@CoinRingMaker 3 жыл бұрын

Check out my recommend tool list at coinringmaker.com

@alexanderdavis5332 Жыл бұрын

I would suggest warming it up after first hole punch and dipping in water

@CoinRingMaker Жыл бұрын

I really haven’t seen much of a difference with this except when a coin is annealed it’s more likely to flair out when punched.

@CandSMINING 3 жыл бұрын

Great video, I have been doing metal work for years and am ready to look at another type of metal work. I have seen others heat the ring several times between stretches, is that not necesary? Thanks for sharing your knowledge.😎⛏⛏🔥🔥🔥

@CoinRingMaker 3 жыл бұрын

I’m glad you liked it.

@theresabot 3 жыл бұрын

How do you shrink a quarter ring? We got a stretcher but it made it to big.

@CoinRingMaker 3 жыл бұрын

I use a tool called a 17 degree reduction die. You can find it on my recommend tool list here - coinringmaker.com/recommended-coin-ring-tools/

@davemaguire4086 3 жыл бұрын

Hey man I was just wondering you mentioned right here at 10 minutes and 30 seconds or so about using the doming block to reduce the ring after you use that special tool how do you do that?

@CoinRingMaker 3 жыл бұрын

Now I mostly use 17 degree reduction dies for reducing. I use a Doming Block and ball bearing for my first fold.

@davemaguire4086 3 жыл бұрын

I understand you there in the video you mention you can use the doming block to reduce the ring in size as well is that possible

@CoinRingMaker 3 жыл бұрын

This is the best video I’ve found that explains what you can and can’t do with coin rings using a Doming Block. kzfaq.info/get/bejne/fqqod9Gonp60nok.html

@israel8847 3 жыл бұрын

Is the press a must have or just makes it easier?

@CoinRingMaker 3 жыл бұрын

The one ton is a must, the 12 ton makes things easier

@alexanderdavis5332 Жыл бұрын

1964 man…cool video though

@CoinRingMaker Жыл бұрын

Thanks

@joemama5125 3 жыл бұрын

What is the tool you're using to clean up the rough edge of the punched inside of the coin?

@CoinRingMaker 3 жыл бұрын

It’s called a deburring tool. you should be able to find it at a hardware store for under 10 bucks

@joemama5125 3 жыл бұрын

@@CoinRingMaker Thanks for that! Great video. I just purchased this tool yesterday. I used the wrong end of the 3/16 punch and now it's stuck! Any ideas? I should have watched your video first! Be well and stay healthy.

@CoinRingMaker 3 жыл бұрын

@@joemama5125 might need a new kit. Could try and grab the punch with a wrench then hit the wrench with a hammer, be careful. Good luck!

@joemama5125 3 жыл бұрын

@@CoinRingMaker Thanks for the suggestion. A new kit may be the answer if that doesn't work. Be well and appreciate you advise and great videos

@alexholloway5422 2 жыл бұрын

Jarrod Rod Joyce from Pelican,👍

@despraterado588 Жыл бұрын

Making a coin ring with harbor freight tools *DISCLAIMER: only a couple of the tools you see in this video are available at hobo freight, you'll still need other tools that you can't get there*

@user.A9 2 жыл бұрын

could a 3d printed die and folding cone work?

@CoinRingMaker 2 жыл бұрын

Probably not very well

@loopster40 3 жыл бұрын

Can I have a copy of the STL on the 3D printed holder?

@CoinRingMaker 3 жыл бұрын

I’d like to hang on to the file but you can get the tool on my Etsy.

@loopster40 3 жыл бұрын

@@CoinRingMaker I will make it then myself.

@markthompson8656 Жыл бұрын

I would like to make a size 6 ring for my wife. What size coin should I start with?

@CoinRingMaker Жыл бұрын

A quarter should work nicely

@markthompson8656 Жыл бұрын

@@CoinRingMaker thanks

@saybrj 3 жыл бұрын

Where did you get the quarter center finder?

@CoinRingMaker 3 жыл бұрын

I made it using a 3d printer. If you’d like one you can get one here. merc.li/rYYNmEkVb

@CoinRingMaker 3 жыл бұрын

If you haven’t used Mercari before you can get a $10 coupon by signing up through this link. merc.li/G6bzJWb

@saybrj 3 жыл бұрын

Appreciate it.

@CoinRingMaker 3 жыл бұрын

This listing has sold but if you want one you can order it through my Etsy store here. www.etsy.com/shop/TheCoinRingMaker

@lizzieyeehaw5016 2 жыл бұрын

How do you stretch the center without making the ring gigantic? In trying to get the half inch edge the same as the outside edge the ring just keeps getting bigger and bigger…

@CoinRingMaker 2 жыл бұрын

Usually I will reduce and stretch until I get to the right size and shape. If you’ve gone to big, reduce. I hope this helps.

@CoinRingMaker 2 жыл бұрын

You may have to tailor you punched hole size to how thick you want the band.

@lizzieyeehaw5016 2 жыл бұрын

@@CoinRingMaker yes that helps… how do you reduce?

@CoinRingMaker 2 жыл бұрын

17 degree reduction die and a one ton arbor press

@CoinRingMaker 2 жыл бұрын

kzfaq.info/get/bejne/rc2HlJuLuc7Gook.html

@sjv6598 10 ай бұрын

Yup, you got me, great clickbait. ✊🏻

@vinnieangelo2888 2 жыл бұрын

you bought all these tools at h/f?

@CoinRingMaker 2 жыл бұрын

Most of them, some are speciality coin ring tools. Here is a list of my recommended tools. coinringmaker.com/recommended-coin-ring-tools/

@jamescraig6036 Жыл бұрын

Nice video, and I know you're really trying to highlight tools that the average person will have at home, but you really should avoid using a steel hammer on your ring stretcher. Hard plastic or leather is definitely the way you wanna go.

@CoinRingMaker Жыл бұрын

Oh absolutely. I’ve since traded up to a plastic hammer and it works great.

@weatherill430 Жыл бұрын

CAN YOU MAKE AND SEND ME THE BLUE CENTERING THINGY. I KEEP MESSING UP THE CENTER.

@CoinRingMaker Жыл бұрын

buycoinrings.com/products/Quarter-Punch-Guides-For-Making-Coin-Rings-1-2-inch-and-3-4-inch-punch-guides-2-Pack-p381439660

@thomasjefferson3836 3 жыл бұрын

So, not all the tools are from Harbor Freight?

@CoinRingMaker 3 жыл бұрын

You got me, but most of them are.

@justingeraldi2304 2 жыл бұрын

Thank you for making the video,, Has anyone ever told you that you sound like Garfield. No disrespect just had to mention it.

@CoinRingMaker 2 жыл бұрын

Nope, I’ll take it as a complement. I like Garfield.... and lasagna.

@panosmj1976 3 жыл бұрын

That’s not annealing my dude. Every time you quench that coin you re-harden it. Annealing is letting the annealed metal cool at a given rate for that particular metal.

@navarrorings5923 3 жыл бұрын

My dude, you're thinking about ferrous metals my dude. Non ferrous metals become easier to work after a quick anneal and quench as shown in this video my dude. For more information on this my dude, check out beginning metal working videos here on you tube my dude.

@CoinRingMaker 3 жыл бұрын

😆

@panosmj1976 3 жыл бұрын

@@navarrorings5923 oh ok my dude. sorry my dude. my mistake my dude.

@tripleh4884 Жыл бұрын

Dude my dudes..chill my dudes

@filjewell6725 3 жыл бұрын

Didnt kneal it

@CoinRingMaker 3 жыл бұрын

Truth, with copper I skip the flame. Silver is a different story.

@jayjones6904 Жыл бұрын

Use ball peen hammer that claw hammer can chip

@CoinRingMaker Жыл бұрын

You’re right. I use a plastic hammer now.

@tjpelfrey6939 Жыл бұрын

Common man, who can get all this shot what a waste of my time

@chrisallen2005 Жыл бұрын

What are you trying to say?

@dennistennyson8856 9 ай бұрын

Shame on you. You said making a ring with Harbor Freight tools, you lied to everyone.

@CoinRingMaker 8 ай бұрын

Did I not use harbor freight tools? Sorry if this video upset you but I only made it to help others. Coin ring tools can be a bit difficult to wrap your head around. Unfortunately harbor freight doesn’t carry all the tools I recommend but the do carry a good amount of them. Thanks for watching!