Making a Console Staircase

Making a Console Staircase - Pt1 steel

Рет қаралды 2,435,057

2 жыл бұрын

No more ladders :) turn CC on for subtitles! We assembled the steel staircase which will be covered in wood when most of the interior work will be done. I made the stairs almost half a year ago when we were only starting with the house build but didn't install it because it would get in the way when moving the scaffolding and during the concrete pours of the upper floor. It waited on the construction site so it got a bit of rust here and there, but now when all that rough work is completed, we could finally assemble it. Each stair is made from 60x60x4 square tubes welded on 15x25cm 12mm thick steel plate. To connect the stairs to the concrete wall, we used 16mm threaded rods anchored with vinyl ester resin.
I hope you like this this project! Please ask any question in the comments and as always, subscribe for more!:D
House build project:
Pt 1: • Finally! I started bui...
Pt 2: • My house build Pt2- gr...
Pt 3: • Our house build Pt3- w...
Pt 4: • We started building th...
Pt 5: • Our house build Pt 5- ...
Pt 6: • My House Build Pt6- co...
Pt 7: • The Roof is Going up! ...
Website: www.lignum-art.com/
Email: info@lignum-art.com
My instagram: lignum_chan...
My facebook: / lignumchannel
Music:
Concerto No. 1 in E major, Op. 8, RV 269, "La primavera" (Spring) - Movement 3: Allegro
from The Four Seasons by Antonio Vivaldi
Live, Unedited performance - 4m:14.106s
Concerto No. 1 in E major, Op. 8, RV 269, "La primavera" (Spring) - Movement 1: Allegro from The Four Seasons by Antonio Vivaldi
Live, Unedited performance - 3m:35.280s
Wiedemann Recital Hall, Wichita State University
John Harrison - Violin / Robert Turizziani - Conductor / Wichita State University Chamber Players
Wiedemann Recital Hall, Wichita State University
John Harrison - Violin / Robert Turizziani - Conductor / Wichita State University Chamber Players
licence:creativecommons.org/licenses/...
Intro music: Danse Macabre - No Violin by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: freepd.com/Classical/Danse%20M...
Artist: incompetech.com/

Пікірлер: 584

@valentineshanley2959 Жыл бұрын

Greetings from Baldock in England, firstly as a construction man of 53 years, I am so impressed with your videos from first cuttings the foundations to currant status. A truly great journey in constructing this amazing house, together with attention to detail and coordination. Looking forward to the next videos and ultimately the finished article, in particular the external landscaping and boundry fencing. Best Regards Valentine Shanley

@CrankyPantss 2 жыл бұрын

I’m glad you were finally able to get the stairs up. Going from ladders to stairs must feel like a definite milestone and turning point. I hope spring doesn’t rain you out too much. Thanks for sharing this with us.

@lignumchannel 2 жыл бұрын

Yes I hope so too but the long term weather forecast is not so promising.. At least we can start on the interior. Now the visitors are not afraid to go up! Thank you for watching!:)

@elalaouicharaf195 Жыл бұрын

@@lignumchannel 1جطجطهعط اللاإنسانية تتمكء روووعه الله

@covakoma1064 Жыл бұрын

@@lignumchannel why you didnt use concrete anker? Why using silicon or whatever is it in hole ?

@MrFreddarama Жыл бұрын

This is very similar to how I have built a floating metal stair case. Excellent work and I'm sure the final product will come out well.

@HowtoMakeThings Жыл бұрын

I’m loving all these thumbnails to entice us in 🤣🤣🤣

@kamlaelcock3205 Жыл бұрын

Wow I have never done construction before its not even close to my field. But i just sat through 11 videos "Building Your Home" plus this one and i can tell you i am fascinated by your work, excited to begin my journey and tired like hell lol because i felt as if I was working alongside you guys lol. This is some great work and although in the Caribbean we dont do as much when building our houses, it still taught me a lot. I will definitely be watching more of your videos. Thank you

@RobertWiggers 2 жыл бұрын

I always feel so happy inside when your vids are uploaded. Always fun to watch.

@lignumchannel 2 жыл бұрын

Thank you so much Robert! :)

@galgubesi2314 8 ай бұрын

Inspiring work!! nearly 18 months after video is released, how the stair frame is holding? anything that you would have down differently? thanks

@markpfeifer1402 2 жыл бұрын

I like how heavy-duty you build everything.

@ketrotheiinuo Жыл бұрын

Wonderful workmanship and design, keep going. Kindly upload Part 2.

@cncplasmacutting8027 Жыл бұрын

Who click on this video after see thumbnail

@inseiin 2 ай бұрын

You're goddamn right I did!

@user-kx5gs4bf9r Ай бұрын

🙋‍♂️ GUILTY

@timyanke9559 27 күн бұрын

i sure didn't click before 😂😂

@dingbop963 Жыл бұрын

Thing looks looks like a dang ol' death trap

@alexnik888 2 жыл бұрын

Одно удовольствие смотреть как вы работаете. И музыка шикарная.

@giovannyarguello2645 Жыл бұрын

Beautiful! Steel & Concrete go very well together.

@maciejwojcik5216 2 жыл бұрын

Cool realization, as always. My wife wanted to have this kind of stairs. But no rails and childrens it is very bad idea. I am waiting to see next steps. Great house.

@bobdickweed 2 жыл бұрын

Pt1 steel

@vallevaan 2 жыл бұрын

im sure it will have railings it would never pass inspection like that.

@lignumchannel 2 жыл бұрын

Thank you! Yeah this is just the first step, the wood will come last after all the interior work so it doesn't get damaged. I'm also thinking about installing two thin steel pipes up to the ceiling on each step so nothing can get trough and stairs will keep the floating look, still thinking about it though..

@julianreverse 2 жыл бұрын

@@vallevaan BS!

@maciejwojcik5216 2 жыл бұрын

@@lignumchannel floating look is just hilarious and worth to have it. To be honest I cannot wait untill you release next episode.

@user-cf7gu4cf4m 2 жыл бұрын

Выглядит добротно. Молодцы!

@marcovega2651 2 жыл бұрын

Que belleza de trabajo. Verdadera ingeniería convertida en arte. Saludos desde Costa Rica!!! Excelente trabajo.

@lllCCCPlll Жыл бұрын

peligroso diseño. Mi pie (adulto) o la de un pequeño podría trabarse en medio de cada escalón....

@Jaime1698 2 жыл бұрын

Hvala vam što ste podijelili svoje radove a posebno vrhunsku glazbu koju Vivaldi već dugo nisam oduševio, svaka čast za vaše radove, pozdrav iz Portugala točnije iz južnog grada koji se zove Portimão.

@lignumchannel 2 жыл бұрын

Pozdrav iz Hrvatske! :) Hvala na gledanju!

@UaeDelta 2 жыл бұрын

Attention to detail, beautiful.

@josevandui1104 2 жыл бұрын

Magnífico trabalho, com perfeição e um ótimo designer. Viva

@crashspine Жыл бұрын

but it is very dangerous!

@nolsp7240 Жыл бұрын

As a once young architect I once dreamed of being able to design floating stairs. After spending decades as designer/builder for young families, families with seniors, renovations when we had to haul heavy stuff up and down stairways, etc., I accept that I have to content myself to admiring other designers' projects such as this. 🙂

@thanhtrungnguyen2478 Жыл бұрын

Dec 😘😂 và

@ma-lakshmifabricator7549 6 ай бұрын

Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍

@xzytqweo3538 2 жыл бұрын

Excellent job! Those floating stairs really go with the style of the house. Can not wait to see the next part.

@lignumchannel 2 жыл бұрын

Glad you like them! :)

@bobomounten3098 2 жыл бұрын

Dobar Projekt 👍Pozdrav od Makedonija 🇲🇰

@dubrun Жыл бұрын

Que método interessante. Parabéns pelo belo resultado.

@OriginalJetForMe 2 жыл бұрын

I’m impressed you were able to drill all those holes precisely enough. The drill plate must’ve helped a lot. I hate trying to get holes precise on concrete surfaces. Nice work!

@Keechization 2 жыл бұрын

start the holes slow at like 20% power and allow the bit to collar, then let it rip

@OriginalJetForMe 2 жыл бұрын

@@Keechization the bit always walks for me.

@christophbrandt4250 2 жыл бұрын

Using a centre punch on the wall also works quite well, and also drilling with a smaller drill first a small pilot hole first, then go for the actual diameter :-)

@lignumchannel 2 жыл бұрын

@Rick Thank you! Most of them turned out great but few were a few mm off due to rebar. I adjusted those holes with heavy duty biax tool.

@OriginalJetForMe 2 жыл бұрын

@@lignumchannel Too bad you couldn't bring the robot arm in to drill the holes!

@nicolek4076 2 жыл бұрын

Wow! Dramatic staircase! And a very pretty cat in your workshop.

@lignumchannel 2 жыл бұрын

Thank you! 😊

@diyman4257 2 жыл бұрын

this is just wow.. excellent job.

@jackdelancey248 2 жыл бұрын

Always impressed with your work. This house is on another level. Looking forward to the next vid.

@lignumchannel 2 жыл бұрын

Thank you very much! :)

@ivanwalker3391 2 жыл бұрын

Stairway to heaven. Absolute precision. Beautiful. Keep 'er lit Bro!

@lignumchannel 2 жыл бұрын

Thank you very much Ivan! :)

@Ich__yo__best 2 жыл бұрын

Thank you to share always your beautiful job !

@lignumchannel 2 жыл бұрын

Thank you! 😊

@davorb6509 7 ай бұрын

Bravo , lepo narejeno in lepa predstavitev poteka dela . Bravo mojster !!

@testpsd6915 2 жыл бұрын

Beautiful design and excellent craftmanship

@lignumchannel 2 жыл бұрын

Thank you very much!

@JellyBean-vs4dw 25 күн бұрын

Wow, what a fascinating concept! Building a console staircase sounds like a creative and practical solution for optimizing space while adding a unique touch to any home. Exploring the Buildovate CRM could greatly assist in overseeing construction projects similar to this one!

@DIYHSH 2 ай бұрын

I am also making a cantilever staircase in Korea. Thank you for the great video.

@robertevans6481 2 жыл бұрын

The things you come up,like to pick your brain on thing's. That is some cool stair's,i bet the tops of them will look cool. Waiting patiently for part 2 ...have a great week..

@lignumchannel 2 жыл бұрын

Not quite sure how I will finish them but there is plenty of time until then.. They come last after all the interior will be done. Thank you Robert, Have a great week also! :)

@julieta203 Жыл бұрын

Did you consider doing them in concrete tied into the wall? I had similar floating stairs done with concrete and with solid timber treads. The concrete treads where actually tapered from outside edge to wall (thicker at wall connection and had nice curved edges).

@tomsdreamshopworx 2 жыл бұрын

I am subscribed to several hundred channels you are in my top 10! Keep up the great work the house is coming along nicely.

@kulibangunan8700 2 жыл бұрын

kzfaq.info/get/bejne/p9CenLN9nK7YiaM.html

@lignumchannel 2 жыл бұрын

Thank you very much! Good to see you here all these years:)

@garretths 2 жыл бұрын

Super cool stairs and video. Only Lignum would build a jig out of a 12x12 beam, not like all these other hacks using plywood and mdf!

@lignumchannel 2 жыл бұрын

First thing that I found laying around the corner ;) Glad you like the video! Thank you! :)

@onderyurdaer 2 жыл бұрын

Good work! Congratulations.

@torguy5763 Жыл бұрын

Love the choice of music, so glad you didn't put that depressing rock music everyone seems to do when it comes renovating/construction.

@jayko4934 Жыл бұрын

놀랍네요. 능력자이십니다.

@OneSmellyTaco Жыл бұрын

'"Making a console staircase and having some yoga pants walk them up for clickbait" got it.

@felixmartins2437 2 жыл бұрын

Mettre du scellement avant fixer les marches pour que ça plaque bien, très bonne idée !

@bobfred1974 8 ай бұрын

mesmerising, just breathless cirurgic artesanal job

@GoranVego Жыл бұрын

What do you think about using thread locker on the bolts?

@psidvicious 2 жыл бұрын

I hate to sound pretentious, but unless you actually have experience working on similar work as this, it’s hard for people to really appreciate what you’re doing here. With the amount of skill, precision and most of all the thought that you’re putting into each of the elements on this house. It really is cool to watch when you know that this stuff is not nearly as simple as it looks. Outstanding project! 🤜🤛

@NathanNostaw 2 жыл бұрын

Very nicely made. Looks great

@lignumchannel 2 жыл бұрын

Thanks a lot 😊

@kmonnier 2 жыл бұрын

Music and work, so beautiful!

@lignumchannel 2 жыл бұрын

Many thanks!

@isailwind3471 5 күн бұрын

no handrails violates every building code known to man. 😂

@Stefan_G 2 жыл бұрын

Very nice👍. What did you do between the consoles and the wall?

@Buildingenjoyment Жыл бұрын

Love the staircase❤

@pharaon6718 2 жыл бұрын

I can't wait to see how you are planning to hide those bolts that sticking out 😎

@lignumchannel 2 жыл бұрын

I have a plan😉

@stanimir4197 2 жыл бұрын

one simple way would be having nuts with caps. After cutting the threaded rod, the unscrewing action of the existing nut would reform back the threads. Then screw the nuts with the caps.

@Helloverlord 2 жыл бұрын

Awesome! A simphony of everything!

@lignumchannel 2 жыл бұрын

Thank you very much! :)

@Codger2015 Жыл бұрын

Loved this vid about your steel stairs. You all have such excellent content. A real pleasure watching you work your magic. Is there a part 2 for these stairs? Is this in your house build for which you have 12 episodes?

@lxndr9690 Жыл бұрын

Yes, it’s in there house. I’m also waiting for the woodworking part

@gerardfenn3988 Жыл бұрын

Did you have to re-tap the threaded rods after cutting them with the angle grinder? I would think so. Maybe you know a trick you can teach me?

@MLG-gx9sp 2 жыл бұрын

Very nice house sir! Does the wall that you made the staircase on have a specific role? Because it is made out of concrete and i can only think it's an antiseimic wall on your load-bearing structure.

@lignumchannel 2 жыл бұрын

You are exactly right. We are in a quite active seismic region and a percentage of walls in each direction have to be from reinforced concrete. Glad you like it! Thank you😁

@FromTheHeartWoodMK 2 жыл бұрын

First! Such incredible work as always! Wood worker, CNC robot coder, house builder and amazing metal worker, what can't you do? Keep it up man!

@lignumchannel 2 жыл бұрын

congratulations :) The fastest finger! Thank you very much, and I'l do my best.

@AlexanderZapataIndividual Жыл бұрын

The stairs to heaven I see.

@CeicelRockMonster Жыл бұрын

Love the classical music more videos should be made with such music

@uw960 Жыл бұрын

Amazing! Can you say how much the material cost please? ☺️

@temyraverdana6421 2 жыл бұрын

Nice work guys, a wonderful staircase skeleton. Anyway, really you never found rebar in concrete wall? You are very lucky because I remember there is a lot of rebar in that wall 😅 Thanks for share and see you next

@lignumchannel 2 жыл бұрын

I did but it didn't deflect the drill bit too much. I was fortunate that distance in between each step is almost the same as double distance on the rebar mesh, steps are cca30cm apart and mesh was 15x15cm. so if I missed it on the first step, I was quite sure I wont hit any at all.. I hit a couple on the horizontal direction though.. Thank you for watching! :)

@bughethewall1991 Жыл бұрын

Nice work as always, but the bars holding the landing are way too much near the edge. For an M8 with transversal load minimum distance is 50 mm. Hope for you it will have no problems 😁

@mohamedawaad7029 2 жыл бұрын

normaly we use fixbolt or fisher or akmon bolt some thing like that but what you used instead of that ?

@asia.gulf.engineering9481 Жыл бұрын

Very good technical work

@lorgerdat Жыл бұрын

Nice work lingam

@insurmountablemind2467 2 жыл бұрын

Gorgeous!

@lignumchannel 2 жыл бұрын

Thank you! 😊

@WillLeingang 2 жыл бұрын

You really stepped it up on this one. Great work! Clearly you are taking this build to new heights. Looking forward to part 2!

@lignumchannel 2 жыл бұрын

Thanks a ton! :)

@doubledarefan Жыл бұрын

Stepping up your pun game.

@LightGesture Жыл бұрын

Idk about leaving it open... but looks cool. Would it have been easier to put the books in the wall at the time of the pour?

@trubovarov 6 ай бұрын

Чудесная музыка Вивальди и красивая попка! Лестница кстати тоже ничего получилась😊

@sergiotorres8976 Жыл бұрын

Hola Genial el trabajo , queria saber si me podias pasar los planos de los aceros de cada paso de la escalera :)

@BostonMark Жыл бұрын

Beautiful job💪

@alexey5407 2 жыл бұрын

очень круто! молодцы

@LLLaguyangdirekomendasikan Ай бұрын

Menonton terasa lebih nyaman lagi mendengar musiknya menggunakan headphone 😇😇😇😇😇😇 MANTAP

@ESSENZAHERRERIA-vy3ff Жыл бұрын

Amazing bro, amazing, congratulation 👍👍👍👍👍

@luciflash 2 жыл бұрын

Did all the stairs turn out to be the same height? Or did you make the holes bigger in the stairs, so you had some wiggle room, and aligned them to a sign on the wall?

@lignumchannel 2 жыл бұрын

I got them precise +- 1-2mm , this is plenty for final tuning with the wood cover. I drew position of each step on the wall but still managed to hit some rebar. I adjusted those holes with heavy duty biax tool.

@davecurda2350 2 жыл бұрын

Love the classical music on your videos.

@lignumchannel 2 жыл бұрын

Glad you like it! Thank you Dave :)

@oilot8699 2 жыл бұрын

항상 기대를 저버리지 않는다 마감이 더 기대가 됩니다

@supersasquatch 2 жыл бұрын

Looks super safe and not dangerous at all

@lignumchannel 2 жыл бұрын

Yeah, It also looks like it is not yet completed and this is only just the base.

@deronburton2994 Жыл бұрын

What did it look like when you finished the trim?

@acraftman2823 2 жыл бұрын

Your going to have some awesome wall space and the volume 💰, there is a guy has a channel called the nito project that does some interesting wall finishes "organic" , but with your robotics and design skill I am sure you will have a treat in store for everyone. I could see some cool geometric plywood panel treatments or maybe a homage to your luthier skills .

@lignumchannel 2 жыл бұрын

Glad you like it! That concrete wall bill be covered in steel panels of various heights to give it a mosaic look. the stairs will be wooden with steel pipes as guard going up to the ceiling. I thought about wood cover for the wall but there is enough of it already with the beams and the ceiling so wood will come on the kitchen side. I'm thinking of some pattern like I did the guitar case if you looked that video, but on the whole wall. Hope it wont be too much and overwhelming.

@lanzaroteenbicicleta5055 3 ай бұрын

if you had used enough leveling mortar, it wouldn't have been necessary to insert compensating wedges. Is this true?

@officalcanavar2641 2 жыл бұрын

Bro you are a Maestro 👌🏼👌🏼

@lignumchannel 2 жыл бұрын

Thanks ✌️

@smekbiggy2670 Жыл бұрын

Those bolts could hold a crane

@VanDerPol 2 жыл бұрын

What an elegant staircase! Did you calcute the needed steel thickness (if yes: how?) or did you go by feel/experience?

@RubyRhod 2 жыл бұрын

I guess these stairs would hold up tons. The bolts look like M20, glued in, the square tube could be 100x100x4.. and there are two of them.. tons!

@lignumchannel 2 жыл бұрын

I got the minimum tubes and anchors in the main project from certified civil engineering office when I was applying for a building permit. Calculated were 50x50x4 welded to 10mm plate and m14 anchors. I used 60x60x4 welded to 12 mm plate and m16 anchors. Just to sleep tight.

@zstarwarsz 2 жыл бұрын

@@lignumchannel overbuilding ftw. few $ upfront=longevity without a worry.

@stanimir4197 2 жыл бұрын

If anything that's way, way overbuilt.

@stanimir4197 2 жыл бұрын

@@RubyRhod at 5:52, you can see it's wrench 24 - so M16.

@YusufYusuf-ew2vo 3 ай бұрын

THANK YOU FORM INSIPIRATION IM FROOM INDONESIA IM GLAD YOUR VIDEOS IM very happy🎉🎉

@ellieboa 2 жыл бұрын

Looks great!

@lignumchannel 2 жыл бұрын

Thank you very much Ellie! :)

@jasonb4350 2 жыл бұрын

Cool, and I’m positive it is sturdy, but I would still not be able to walk up them .

@lignumchannel 2 жыл бұрын

glad you like it! :)They will be much safer when they get finished.

@gavinhay6627 Жыл бұрын

is that a standard method for fixing such a staircase ? I wouldn't have thought gluing threaded rod into the wall would be sufficient over time. surely having the rod go all the way through the wall to a backing plate on the other side would give a much stronger hold.

@royflacko6531 Жыл бұрын

I would never trust this.

@Effectivebasketball Жыл бұрын

OMG overkill big time. What are that stairs for 2-3 tones weight?

@H2OGAME 8 ай бұрын

Последний болт в керамоблок, это как ложка дегтя в бочке меда) Мне интересно, если ума не хватило рассчитать высоту верхней площадки, так нельзя было ухо длинней сделать?

@ronnyvanderwee417 2 жыл бұрын

cool and clean !

@user-mi8bx2zl1f Жыл бұрын

Brad is insane!!! How will you then plaster and level the walls if you have already installed steps?

@lignumchannel Жыл бұрын

Who says plaster goes on that wall?😉

@simlowsb 2 жыл бұрын

Bravo... I like your video

@electric876 2 жыл бұрын

Great job.

@lignumchannel 2 жыл бұрын

Thank you! Cheers!

@wintercoder6687 Жыл бұрын

My favorite part was the very brief cameo at the end.

@cesarosorio1057 7 ай бұрын

Gracias te amo ❤

@mattblack9069 Жыл бұрын

Was the chem set 2k or 1k looks like a standard epoxy grout?

@user-qu2pv2wp3o 5 ай бұрын

how did you manage to put the nuts on the screws after cutting them ??

@sanathoibalaishram5211 2 жыл бұрын

Best thumbnail

@omarherrera10001 Жыл бұрын

hola ustedes podrán recomendarme algún anclaje, he utilizado cf 890 de fester poliester pero tuve muchos problemas con la cánula pues inmediatamente al utilizarlo se endureció y no permitió aplicarlo, en su video observo que no hay problemas saludos de México gracias