Making a Crazy Part on the Lathe

Рет қаралды 529,676

4 ай бұрын

In this video I made a crazy piece on the lathe! Try to guess what I'm going to use this piece for. I was inspired by several craftsman, which sold their products on Marketplaces.
I hope you like it! If you have any questions on the used tools, materials or the processes, write it in the comment section - I will try to answer as soon as possible!
If you want to support my channel hit the like, leave a comment, subscribe and share my work! Thanks for watching!
Check out my videos:
• Crafting a Thermos Mug from Metal and Wood →→→ • Crafting a Thermos Mug...
• Making a Crazy Part on the Lathe →→→ • Making a Crazy Part on...
• Turning a Cube on a Lathe →→→ • Turning a Cube on a Lathe
• Incredible pattern on the lathe →→→ • Incredible pattern on ...
• I made a Diсe from steel and brass leftovers →→→ • Crafting Your First Di...
🔔 Subscribe Now 🔔 to our channel and turn on the notification bell. Join us on this exciting adventure as we unravel the magic of metal, machinery, and artistry.
00:10 Sharpen a 35-degree cone
02:15 Cut the right-hand thread with a pitch of 4 mm with a reverse cutter
06:15 Basic workpiece turning
06:35 Part cutting
07:55 Drilling with an 8.5mm drill bit and tapping m10 threads
08:30 Cut the drill bit from its shank
08:55 Shank turning and threading m10
09:55 Final result
#lathe #lathemachine #lathework #latheturning #metalworking #metalcrafting #diy #howitsmade #MetalArtistry #TurningMetal #MetalShaping #DIYCraftsmanship #LatheSkills #ArtisanCrafts #turningwood #carpentry #LatheSkills #ArtisanCrafts #turningwood #carpentry #lathework #metalworking #metalcrafting #MachiningMasterclass #ArborCrafting #MillingBladeMounting #PrecisionMachining #MetalworkingSkills #MachinistTips #CraftingArbors #EngineeringPerfection#MachiningMasterclass #ArborCrafting #MillingBladeMounting #PrecisionMachining #MetalworkingSkills #MachinistTips #CraftingArbors #EngineeringPerfection #BrassTapping #PrecisionCraftsmanship #Craftingpattern #patternmaking

Пікірлер: 57

@daphoosa 4 ай бұрын

I made two of these in tech college. Someone asked if we could machine them. The instructor handed me the materials and a crappy print, and I did it. Mine were 4in Dia and 10in long (100mm x 250mm). I used an Acme thread, but I no longer remember the pitch. The customer was super happy with them.

@LatheLegends 3 ай бұрын

It's great!

@karlfimm 4 ай бұрын

I remember seeing a device like this, which bolted onto a vehicle in place of a wheel, advertised in the 1970s. Split wood really easily but always looked a bit dangerous.

@LatheLegends 4 ай бұрын

Hello! Yes, you're right. This device is a bit dangerous.

@georgeabramian120 2 ай бұрын

There is a tool called an ax that is more useful and cheaper.

@LatheLegends 2 ай бұрын

That's true! Axes are versatile tools for many tasks.

@Said_2.28 4 ай бұрын

1. Адаптер sds-plus, стоит копейки. Портить бур и тратить время на изготовление адаптера, не рационально. 2. При заклинивании в дереве дровокола и попытки его выкрутить на обратных оборотах - выкручивается адаптер, а не дровокол. Это даже ребёнку понятно.

@DavisMachine 19 күн бұрын

Consider using a negative lead for roughing to improve tool life and take heavy consistent cuts

@user-ji2nf7nz4o 4 ай бұрын

wow, your accuracy is amazing!

@LatheLegends 4 ай бұрын

Hi! Thank you so much 🙏🙏

@lifco.hydraulics 2 ай бұрын

Amazing work.

@LatheLegends 2 ай бұрын

Glad you think so, I'll keep working to amaze you even more!

@user-qf5fy1hl1n 4 ай бұрын

FT-11 good lathe

@LatheLegends 4 ай бұрын

Hello! I agree with you. FT-11 is a great lathe

@RustyInventions-wz6ir 2 ай бұрын

Very nice work

@LatheLegends 2 ай бұрын

Thanks for your review 🙏

@Gjed16 4 ай бұрын

I did suspected it would be for wood splitting when I first saw it. I can't find info on FT-11 lathe. You seem to have some sort of CNC type control with auto feeds. Is that somthing you've added? Can you provide some wider views of the lathe? And finally what is the machine you show in the center of your home page picture? Thank you for some very entertaining videos. Good work.👍👍⚙🏆👏🇨🇾🇺🇸

@LoBeau53 4 ай бұрын

I suspect he was hand feeding the cross slide for the threading process hence the reason for the inverted tool and reversed spindle. Any errors in hand feed rate would be less catastrophic and correctable as the tool would be moving away from the taper rather than into the material.

@LatheLegends 4 ай бұрын

Hello! Thanks for your comment! You are absolutely right 😊

@LatheLegends 4 ай бұрын

Hi! Thanks a lot for your feedback and questions 😊 I have a simple universal FT-11 lathe without CNC and without additional non-standard fixtures, everything is turned on the feeds and manual movement of the cutter 😊 😀

@cx144 4 ай бұрын

from France : very nice work, your lathe allows you to activate the 2 feeds at the same time?

@LatheLegends 3 ай бұрын

A big Hello to France! When tapping, only the longitudinal movement of the cutter is activated and the transverse movement of the cutter is manually driven

@cx144 3 ай бұрын

OK ! very well, i understand but very difficult to be régular !@@LatheLegends

@puntoyfinal2553 4 ай бұрын

Como haces para el movimiento simultaneo del carro longitudinal y del transversal. Imagino que el longitudinal va en automatico para hacer la rosca y el transversal lo haces con mucha habilidad por cierto, tu de forma manual. Y una pregunta mas : La rosca es a izquuerdas me parece. Y pregunto porque la haces a izquierdas. Felicidades y gracias por el video.

@LatheLegends 4 ай бұрын

¡Hola! Gracias por su pregunta. El avance longitudinal se realiza mediante el tornillo de desplazamiento y el avance transversal se realiza manualmente. La rosca o roscas son a derechas porque el portabrocas gira en sentido contrario y la fresa se desplaza de izquierda a derecha.

@ACHaceASMR 4 ай бұрын

El movimiento transversal se hace por medio de un dispositivo que se llamardo "charriot" que sirve para hacer conos, es todo manual, vos lo moves y le das los grados de inclinación que quieras

@puntoyfinal2553 4 ай бұрын

@@LatheLegends aprendido y comprendido . Muchas gracias. He observado que para el roscado la cuchilla está colocada con la parte cortante hacia abajo porque el torno está girando al contrario. Eso no me había dado cuenta antes. Gran habilidad la suya amigo para hacer ese roscado cónico. Gracias por el vídeo excelente.

@puntoyfinal2553 4 ай бұрын

@@ACHaceASMR si eso lo sé pero en ese vídeo hay más cosas que un simple como. Hay un cono roscado.

@JohnnyIrish553 Ай бұрын

Wow, nice work man! Is this an NC-machine?

@LatheLegends 25 күн бұрын

Thank you so much! It's not an NC-machine

@user-un2qx7hr5x 3 ай бұрын

I can't get enough of your channel! 😁

@LatheLegends 2 ай бұрын

I'm so grateful for your support and encouragement! It keeps me motivated to create more content!

@technicalt.r.p 3 ай бұрын

❤❤

@salcudeanantonio1365 2 ай бұрын

❤

@Lesnik-om6hc 4 ай бұрын

Работа хорошая. Но топориком было бы быстрее. Да и дрель не рассчитана на такие нагрузки.

@PundhyLuzino Ай бұрын

Woow ini bagus kawan

@huntingandstuff9489 4 ай бұрын

Is this a cnc lathe?

@LatheLegends 3 ай бұрын

Hello! It's a simple lathe.

@IshmaelNdayikeza 25 күн бұрын

Fabrication mecanique

@marcelitolinga4071 29 күн бұрын

Taper attachment

@christiankrippenstapel4336 2 ай бұрын

What about hardening?

@LatheLegends 2 ай бұрын

The product can be hardened, but it serves well as it is!

@joed3786 3 ай бұрын

There is a Taper Attachment on that Lathe. Why are you using the compund?

@900stx7 2 ай бұрын

I've never seen a taper attachment that would cut at that much angle. Maybe five degrees max.

@sacundim 4 ай бұрын

This is a bit similar to a part that many old spring-powered clocks have, called the fusee, which is a sort of continuously variable transmission to output a constant torque as the spring winds down. The spiral has a gear at the bottom and a chain or cable goes around the spiral grooves with the mainspring pulling on it, so as the chain unwinds the spiral means the gear ratio changes. See for example: kzfaq.info/get/bejne/ntlyedRlnJe6fJs.html

@LatheLegends 3 ай бұрын

Thank you so much for your comment and interesting video!

@thehaser6148 4 ай бұрын

Wood splitter

@LatheLegends 4 ай бұрын

Hello! Yes, you're right)

@AngopPecheneg 3 ай бұрын

Абсолютно бесполезно и только зря потраченное время как мое так и автора.

@caseynash9729 25 күн бұрын

Looks like a bolt remover

@TokyoNightGirl-fk4cn 2 ай бұрын

👍💜💜💗💗💜💗🤍🤍🤍

@LatheLegends 2 ай бұрын

😍😎

@user-yp9pz2sn9v 3 ай бұрын

Ого, хорошая идея от британских учёных 😂. За те деньги кругляка, электричества, бесполезной работы станка, покупки мощной дрели ?! Можно было купить хороший топор и нанять украинца поколоть эти дрова, еще бы на пиво осталось.