No video
Making Cribbage Boards
Рет қаралды 77,967
Күн бұрынHow to make a cribbage board!
Cribbage boards are super fun to make and made even easier with templates. You don't need a CNC to pull one off! They’re great gifts and add a unique item to your product line for all you side hustlers.
-⏱Timestamps⏱-
00:00 How to Make a Cribbage Board
01:11 Edge Grain Board Option
02:02 Templates
06:19 Edge Profiles
06:46 Drilling Holes
11:00 Surfacing After Drilling
11:34 Peg Storage
22:00 Sanding Progression
22:38 Finishing Options
26:01 Final Notes
If you’re unfamiliar with cribbage, it’s a great game that uses the board and pegs to keep score. It’s a fantastic two player game, but can also scale up to more players. Might be that perfect pandemic game for you and your circle. A handmade board only heightens the experience. We love to travel with ours to coffee shops, bars, or getaways.
-📸Instagram🎥-
/ 6_8woodworks
-💻Website💻-
www.sixeightwo...
-💲Armor Tool Discount💲-
Use promo code 2IOVMXAQ9W at www.armor-tool... to save 10% on your order! Mobile workstations, clamps, pocket hole jigs, and more!
-🔨Tools/Supplies I Use🔨-
www.amazon.com...
-As an Amazon Associate, I earn from qualifying purchases.-
Cribbage Template: amzn.to/3fJjLul
Cribbage Pegs: amzn.to/2PD2YOI
Magnets: amzn.to/3utnhwQ
Table Saw: amzn.to/2OoTI04
Planer: amzn.to/3mnA4OC
Orbital Sander: amzn.to/3mmxMzo
Router: amzn.to/3sUkEUs
Trim Router: amzn.to/2OpHNiC
Spiral Straight Bit: amzn.to/39PAx79
In the video I used Osmo Polyx. This is a great finish that has some unique steps for application. For more on the application process, check out this video around 13:30. • Modern Table with Dowe... If you choose to use this finish for cribbage boards, just be sure to not let any pool in the holes, or the wax will harden. The spray lacquer I mentioned, is the easiest finish for cribbage boards. All of the finishing supplies can be found here: www.amazon.com...
There are loads of other options for peg storage. For another idea that might give you inspiration, check out my Cribbage story highlights on Instagram: www.instagram....
@Glock2201 2 жыл бұрын
Another awesome video. You do such a great job of explaining what you are doing and mention all the options. I actually like the idea of them coming apart rather than swiveling so you only have the board while playing.
@SonOfPatriots 3 жыл бұрын
I love how you showed mistakes you made and how to avoid them. Most WW channels "never" make mistakes 👌🏻
@SixEightWoodworks 3 жыл бұрын
Appreciate that. Yeah, we all make them. It’s just how we pivot and adjust the project.
@nicholassels7411 3 жыл бұрын
The Rockler jig he mentioned does come with the self-centering drill bit. It also stops at the proper depth as well. It's what I use and the results are fantastic
@patrickdougherty5921 8 ай бұрын
I have a Rockler Drill Press Jig, or "Portable Drill Guide". I absolutely love it, and it's probably more practical in most situations for a DIYer than going up river on some sketchy craigslist ad and buying a 500lb drill press covered in dust in some old guys machine shop. Which oddly has like 50 chain saws hanging, with an eerie windchime going off in the distance as the fog starts to roll in with the fast approaching nightfall....
@503grown Жыл бұрын
Absolutely beautiful work! I made my first board today with the same template you used. I absolutely love the card and peg holder. Can't wait to try it out! Thanks for the great video
@SixEightWoodworks Жыл бұрын
awesome! Happy pegging!
@lincolnstewart6919 3 жыл бұрын
You sir, just earned a subscription! Great video, can't wait to see more! And bonus points for being a Hawks fan!
@SixEightWoodworks 3 жыл бұрын
Love it! Go Hawks!!
@haroldoliver2331 3 жыл бұрын
Great cribbage a boards, thanks for the help and all the resources!!!
@SixEightWoodworks 3 жыл бұрын
Hope it helps! Great game and fun to make boards.
@vfxsoup 3 жыл бұрын
Why do you only have 10k subs? You should be closer to 300k+ and likely will soon. The videos are great and very well narrated and put together. Was thinking a CNC could be a good way to go with the holes. But drill press just as cool!
@SixEightWoodworks 3 жыл бұрын
😆 Appreciate it! Just started making more KZfaqy videos earlier this year, with the full narration and such. Guess it makes sense as I’m a verbose teacher. Yeah, CNC would be the cleanest approach. Just not available to most. Template route definitely works.
@timlist4173 3 жыл бұрын
I think I will give this a go. Thanks for the links and the inspiration.
@SixEightWoodworks 3 жыл бұрын
Have fun with it!
@timlist4173 3 жыл бұрын
@@SixEightWoodworks ordered one from rockler, the 2 player version.
@peterspencer396 2 жыл бұрын
Absolutely wonderful! These are beautiful! Well done!
@TotalBoat 3 жыл бұрын
Great tutorial! These cribbage boards are beautiful and so fun!
@SixEightWoodworks 3 жыл бұрын
Thanks guys!!
@Paulboylegacy 3 жыл бұрын
Really good job, know what I am going to add to my product in the new year. Thank you.
@bryanschlosser857 3 жыл бұрын
Nice work, now I need a drill press. Go Hawks!!!
@SixEightWoodworks 3 жыл бұрын
Appreciate it! Definitely check the online classifieds. Always some deals to be found. Go Hawks!
@alexedwards8750 Жыл бұрын
Great video, really appreciate the detail
@NM-mh2if Жыл бұрын
Love the projects you are making. Thanks for these videos. Could you please consider making a video on your router table and maybe sometime a drill press table?
@SixEightWoodworks Жыл бұрын
Appreciate it. It’s definitely on my list. Hope to get it out sometime this next year.
@jordanmattievisuals Жыл бұрын
Such a great (helpful) video! Thank you!
@SixEightWoodworks Жыл бұрын
Glad it helped!
@dansiemens8953 3 жыл бұрын
Roto hinge works good for the swivel option
@SixEightWoodworks 3 жыл бұрын
I’ll look into it! 👍
@RandyJohnsonCoral 11 ай бұрын
Great Job
@jimshowtovideos Жыл бұрын
You do very nice work, thanks for the video.
@SixEightWoodworks Жыл бұрын
Appreciate it!
@jamzach4 3 жыл бұрын
Really nice man. Great ideas and great options
@SixEightWoodworks 3 жыл бұрын
Appreciate that!
@GingerWoodworks 3 жыл бұрын
Very nice!
@SixEightWoodworks 3 жыл бұрын
Thanks Rob!
@NikolajLepka 3 жыл бұрын
Just use a magnet in the middle for the swivel That way you can slide the whole thing off if you want or just swivel it Et voila, best of both worlds
@mauriceryton 3 жыл бұрын
Nice work.
@SixEightWoodworks 3 жыл бұрын
Thanks so much!
@mynewone2011 3 жыл бұрын
great video just hit the subscribed button now i have somthing to do in the winter months in victoira bc canada when all we get is nothing but rain
@SixEightWoodworks 3 жыл бұрын
Awesome! Yeah, we’re just down a boat ride away from you in Lake Stevens, WA. You should check out my buddy Brad’s stuff over at instagram.com/rough_seas_woodworks?igshid=gmgmjj43ri3i He’s further up the island from you and does amazing stuff!
@dennisbeamish9058 2 жыл бұрын
Hi -- Great tutorial - thanks. I can't find your information about where to buy. that metal template. Can you please advise the name etc. Thanks Dennis Beamish Cambridge Ontario Canada
@lauriepierce7679 Жыл бұрын
I can only find the small straight kit online. Where can I find the other ones?
@durtybob1 2 жыл бұрын
Love your content I'm taking a shot at a cribbage board and I'm getting some splitting around the peg holes would using painters tape on top of the board cure that?
@carterdaggett4849 2 жыл бұрын
Hello! What are the exact measurements of the template used in this video? Thanks!
@HalibutHook 10 ай бұрын
Do you have a link for the magnets?
@jacobg9262 3 жыл бұрын
“You want to make sure you have nice, clean holes”
@DarkGuitars Жыл бұрын
Go hawks!
@SixEightWoodworks Жыл бұрын
Go Hawks!
@annelimerivaara2628 2 жыл бұрын
What a great video! What router bit did you use for the step cuts? I heard you say cove and bead but I was wondering what size you used! Thanks!
@esurfrider7687 3 жыл бұрын
How to finish a board before applying epoxy, any suggestions?
@patriotwoodworker6092 Жыл бұрын
Very nice! How much do you sell these for?
@jamesmacintyre1415 2 жыл бұрын
May have to try this in the spring as a new project. But 400 holes. I may need some jamming tunes for that task hours i asune
@SixEightWoodworks 2 жыл бұрын
You do get in a groove after a while
@samhandwich3965 3 жыл бұрын
How thick is the top board, looks like an inch?
@markeliasson7165 5 ай бұрын
What is the thickness of the two pieces? I assume the bottom is 1" since card boxes are 3/4".
@SixEightWoodworks 5 ай бұрын
Yes, about 1”-1 1/4” for the base
@robertmodric7965 2 жыл бұрын
Where would you buy the pegs
@Astrogazzr 3 жыл бұрын
Love this video. I've been wanting to make a cribbage board for a while and this really helps. Just one question about how do you keep the holes clear of finish if you want to use the liquid poly?
@SixEightWoodworks 3 жыл бұрын
Thanks. I definitely prefer the spray. But you can have a toothpick handy or a cotton swab if you go too heavy.
@jtswoodworking4857 3 жыл бұрын
Love the videos! Question for you. Where do you purchase your hardwoods?
@SixEightWoodworks 3 жыл бұрын
Thanks! Crosscut Hardwoods in Seattle or Edensaw in Port Townsend, WA.
@jeffshippee 3 жыл бұрын
Can you demo how to make one like your “family “ Board with removability cover? Please 😃
@SixEightWoodworks 3 жыл бұрын
I’ll add it to the queue. Pretty similar process. Just tricky to get those thin magnets into the cover.
@TheRealtree2 3 жыл бұрын
Great video. I just got the rockler template and am having horrible tear out between holes. Any suggestions?
@SixEightWoodworks 3 жыл бұрын
Thanks! That’s a bummer on the tear out. If it makes you feel better, I definitely get some. Best solution is to make sure the template securely attached, where it can’t keep lifting with sawdust getting underneath it. Higher speed on the drill press, if you’re not already at top speed??? Best of luck!
@eldonwalker8426 Жыл бұрын
Do you need to use the drill after finishing to clean out the holes
@SixEightWoodworks Жыл бұрын
If you’re using a hard wax, you’d need to clean out the holes with a skewer or something small. After doing these, I’ve gone back to other oils or the spray lacquer to eliminate that step.
@koalafan1576 2 жыл бұрын
What does the 6:8 mean?
@HalibutHook 8 ай бұрын
Have you had a problem with the drill bit tearing out wood under the template?
@SixEightWoodworks 8 ай бұрын
100% Couldn’t ever figure out why. No matter how tight it was to the wood’s surface or speed of the bit. If you figure it out, let me know!
@HalibutHook 8 ай бұрын
@@SixEightWoodworks did you find a way around it?
@stevesiefken6432 3 жыл бұрын
Do you use a lathe to turn the pegs?
@SixEightWoodworks 3 жыл бұрын
I don’t. These are metal pegs i ordered online.
@brading84 3 жыл бұрын
Where did you get the large diameter magnets??
@SixEightWoodworks 3 жыл бұрын
They’re listed under the project parts at this link: www.amazon.com/shop/6_8woodworks?ref=inf_pub_6_8woodworks
@dcaudio1 3 жыл бұрын
What brand drum sander did you get and how much was it?
@SixEightWoodworks 3 жыл бұрын
I have the Supermax 19-38. About $1,500 great unit and worth the investment. I talk more about it in this video: kzfaq.info/get/bejne/er6fZqykr6usY5c.html
@ArticleFive 2 жыл бұрын
Love channel. Please get and wear a mic. Much easier to hear.
@willmotz92 2 жыл бұрын
Ok where do you get your pegs at I've been making crib boards for years but can never find pegs
@SixEightWoodworks 2 жыл бұрын
Here’s where I got the pegs: amzn.to/3qN1RfO
@davidflores4398 3 жыл бұрын
great video! my wife & i own a locally carpentry company & have a client who is wanting a board. this is definitely going to help me a lot! gained a subscriber & we will be checking out your instagram page! what are the dimensions that you use for the pocket of cards to accommodate the entire box?
@SixEightWoodworks 3 жыл бұрын
Awesome! For the card storage, I just trace the card box and add about a 1/16 “ around. If your pencil comes out a bit from the box while tracing, you don’t even need to measure. I’m ok with a little wiggle room.
@mylesnampel7613 3 жыл бұрын
What kinds of wood do you use?
@SixEightWoodworks 3 жыл бұрын
Primarily walnut, maple, cherry, ash, sapele, and Padauk. Quite a few other species mixed in with these boards and other projects.
@mylesnampel7613 3 жыл бұрын
Thanks
@David-fv7zg 2 жыл бұрын
Are you going to add more inventory to your store?
@SixEightWoodworks 2 жыл бұрын
Hoping to later this summer.
@samueldecelles6646 2 жыл бұрын
I bullding a cribbage board based on Asterix the Gaul
@johnhanzalik4382 Жыл бұрын
Would you sell a board by chance?
@kenmcmurray4006 2 жыл бұрын
I really want to be the guy who does the first dislike in a couple videos, but I just can't, well done!
@SixEightWoodworks 2 жыл бұрын
Appreciate it!
@denisdesjardins837 Жыл бұрын
You talk to much
@johnhanzalik4382 Жыл бұрын
Would you sell a board by chance?
@SixEightWoodworks Жыл бұрын
I’m hoping to make some more later this spring. Been a while since I’ve had any available on my website.
@StrongerByGraceDesigns Жыл бұрын
Helpful video! Thank you!! Someone asked me to make a lake one, and I know nothing about cribbage. I have been learning about the game and watching some videos on making them. You explain well!
@paulajones2318 Жыл бұрын
How do we buy aboard from you?
Olde Shed Workshop
Рет қаралды 6 М.