Making a Leather & Kydex Hunting Knife Sheath/Sharpener Combo Leather Working ASMR

Рет қаралды 9,213

19 күн бұрын

Watch me make a leather and Kydex sheath complete with built-in diamond sharpening stone for my Buck 119. If you have any questions about the construction ask in the comments and I'll do my best to answer. Enjoy!
follow me on instagram @roadagentleather
The laser used in this video is the excellent Creality Falcon 2 Pro 60W diode. Creality sent this machine to me in exchange for featuring it in one of my videos. I've had several Creality lasers and can recommend them highly.
Below is a link to save my viewers some $ on purchasing a Falcon 2 Pro (use code"FNPALL10"):
s.zbanx.com/r/KyO0CI0P9ZHK
First 100 orders receive a gift worth $199. Orders 101-200 receive a gift worth $50.
Among the customers who place orders during the initial sales period, one person will be chosen for a free order. #CrealityFalcon2Pro, #CrealityFalcon, #Falcon2Pro 60W

Пікірлер: 74

@ItsDburch 15 күн бұрын

Very clever. From old to new techniques, right down to design and attention to detail. Im very impressed.

@RoadAgentLeather 14 күн бұрын

Thank you very much! And thanks for subscribing!

@chipandrews2892 14 күн бұрын

In a word...Awesome! Thanks for sharing!

@TalRohan 17 күн бұрын

beautiful work ...attractive and practical..slightly jealous of that laser cutter thanks for sharing

@RoadAgentLeather 17 күн бұрын

Thank you very much! And thanks for subscribing!

@mario7mag 15 күн бұрын

wow, I don't know what to say but its almost inspiring. Just amazing work, thanks for sharing!!

@RoadAgentLeather 14 күн бұрын

Wow, thank you! And thanks for subscribing!

@deanransom2350 13 күн бұрын

Wow. Amazing work. Way beyond John Rambos knife. Thanks for sharing. What's next? I watched all the holster videos, dog collar, knife sheath (2), and the wrist cuff. I learn a little something from every video project you do, so Thanks. I am currently working on my own 1911 holster using the Hand of God video you did. Keep videoing.

@HauntedChronicles 18 күн бұрын

Absolutely stunning.

@RoadAgentLeather 17 күн бұрын

Thank you so much!

@seatroutking7555 15 күн бұрын

Try Bostix 24/02 two part hyplon glue, I am a RIB boat builder and repair man and it sticks anything to anything it’s also flexible to a point, I glue rubber and over to aluminium, GRP, wood, steel, good marina stores should stock it 👍🏻 nice work on the sheath

@RoadAgentLeather 14 күн бұрын

Thanks for the tip!

@MASI_forging 17 күн бұрын

The Knife is amazing and so is your work, nice piece of work 👍👍

@RoadAgentLeather 17 күн бұрын

Thanks for watching!

@Juronumo 18 күн бұрын

the new laser looks like it can cut cleaner than the previous laser

@RoadAgentLeather 17 күн бұрын

The cut I made with the glued body pieces came out cleaner looking I think because of the glue itself. Whenever I've laser-cut glue pieces like that they always come out looking pretty clean. Not sure why.

@blue8857 18 күн бұрын

Beautiful!!!

@RoadAgentLeather 17 күн бұрын

Thanks for watching!

@sherlock1895 18 күн бұрын

Well done. I really like that. I wish I could find my fathers old hunting knife. It would be great for that. Cheers!

@RoadAgentLeather 18 күн бұрын

Thanks for subscribing!

@jeromedangelo7028 15 күн бұрын

Beautiful AND functional!

@RoadAgentLeather 15 күн бұрын

Thank you!

@edgell3 17 күн бұрын

Very ice work. You have the gift of coming up with something unique for the ordinary. Thank you!😊👍😊😎

@RoadAgentLeather 17 күн бұрын

Thank you so much 😀

@Hisdudeness799 18 күн бұрын

Just when I think it can’t get any better, you top it.

@RoadAgentLeather 17 күн бұрын

Thanks for watching and subscribing!

@Psychobilly 18 күн бұрын

I’ve got an awesome knife that was just recently gifted to me from a friend in Turkey 🇹🇷 where I work. It would make for some great content for you and I would love to have a great piece of your art for it to live in.

@RoadAgentLeather 18 күн бұрын

Shoot me an email with a picture of it. And thanks for subscribing!

@Psychobilly 18 күн бұрын

@@RoadAgentLeather my son sent some to your Instagram

@davehorlacher 18 күн бұрын

Very impressive.. Unique, Functional and Creative!

@RoadAgentLeather 18 күн бұрын

Thank you very much! And extra thanks for subscribing!

@Lorddanielrushton371 18 күн бұрын

Great job, I really lime that design.

@RoadAgentLeather 18 күн бұрын

Thank you! Cheers!

@jeffallen3382 18 күн бұрын

I always like the new ways you cone up with these cool designs!

@RoadAgentLeather 17 күн бұрын

Glad you like them! Thanks for watching and subscribing!

@geraldstamour1312 8 күн бұрын

Dope AF results, @RoadAgentLeather!

@RoadAgentLeather 7 күн бұрын

Thanks!

@bobchronister3429 18 күн бұрын

You continue to amaze…and share great construction tips

@RoadAgentLeather 18 күн бұрын

Thanks for leaving a comment!

@SamakUp 17 күн бұрын

Great work

@RoadAgentLeather 17 күн бұрын

Thanks

@Dynamytguy 17 күн бұрын

At some point, you're going to run out of room to one up yourself. Always amazing. I always learn some new little technique.

@RoadAgentLeather 17 күн бұрын

Thanks for watching!

@iamnoone. 18 күн бұрын

Another great build and also great tunes. You must be getting laser poor by now. LOL

@RoadAgentLeather 18 күн бұрын

Thanks for watching! I figure if a reputable company wants to send me a laser for something I'm already doing, why not?

@iamnoone. 18 күн бұрын

@RoadAgentLeather don't blame you. They can keep sending them to you. Didn't mean any disrespect to you. I was trying to make a poor joke.

@greggsteward2760 18 күн бұрын

Great job!!! It's nothing but beautiful! Also the quality of the video was fantastic! You're an artist for sure!!!

@RoadAgentLeather 18 күн бұрын

Thank you so much!

@NomadShadow1 17 күн бұрын

ahh, I was wondering where you were going with the whole "gluing metal to kydex" lead. Also, dat jungle music 👌

@RoadAgentLeather 14 күн бұрын

Glad you liked it!

@Semerich_Knives 18 күн бұрын

Very cool 👍

@RoadAgentLeather 18 күн бұрын

Thanks 👍 And THANK YOU for subscribing!

@steveholbrook4729 18 күн бұрын

nice work

@RoadAgentLeather 18 күн бұрын

Thanks for the visit. And THANKS for subscribing!

@joshuapoche5137 18 күн бұрын

Man where do you come up with these? You always have the coolest ideas. Do you get inspiration from somewhere or is this straight out of your head? Beautiful work

@RoadAgentLeather 17 күн бұрын

Thanks! I started with the simple goal to have a larger sharpening block fixed to the sheath. Once I have the basic construction in my head, I try to figure out ways to make that basic design pop more artistically; give it some 'wow' factor.

@gabedimeg1082 16 күн бұрын

I love your projects, absolutely beautiful craftsmanship! Do you take orders or sell anywhere?

@RoadAgentLeather 15 күн бұрын

Thanks! I have an Etsy store, but there's only one listing in there currently.

@Bagmaker0 18 күн бұрын

Nice❤

@RoadAgentLeather 17 күн бұрын

Thanks 🔥

@santiagomindel4107 3 күн бұрын

Hello idol, a question, you clean the leather you are going to work with a brush and soap, then you store it wet in a nylon bag, why is it stored in the nylon bag and for how long? Thank you very much for your information and your videos, greetings from the other side of the world (I used Google Translate to translate from Spanish to English) 👍🙋‍♂️.

@RoadAgentLeather Күн бұрын

It's called "casing". It prepares the leather to accept tooling/stamps. I put it in the bag to let the moisture fully penetrate the leather and not dry out. It's usually only a few hours. Some allow it to sit over night.

@santiagomindel4107 Күн бұрын

@@RoadAgentLeather Thank you very much for taking the time to respond to me!!! I appreciate it

@tfildaed 16 күн бұрын

Always a treat! Do you designate the order the cuts are made or does the laser software? I notice the stitch holes are done before the cut out.

@RoadAgentLeather 15 күн бұрын

You can designate the order. I do all the scoring/engraving first then make cutting passes last.

@user-ij6ik1fw4k 17 күн бұрын

Классные ножны, один маленький минус, на ремешке фиксирующий рукоять ножа клепка на изнанке будет царапать рукоять. А в целом супер!

@RoadAgentLeather 17 күн бұрын

Perhaps it will. The strap can be rotated to different positions if it becomes a problem. Thanks for subscribing!

@MindField_Custom 18 күн бұрын

How about giving away your old lasers? Let some of us play too.

@silvioreyesq 16 күн бұрын

Hey Agent! I recently bought a laser cutter. I am really happy with the results. But I find really difficult to clean the edges. Almost allways I turn out staining the leather with charcoal. Do you have any advice! Thanks in advance.

@RoadAgentLeather 15 күн бұрын

Thanks for subscribing! I try to clean off the char as much as I can with a damp sponge. I dye almost everything I make, so maybe I just don't notice? Are you leaving the leather natural?

@silvioreyesq 15 күн бұрын

@@RoadAgentLeather Thanks for repliyng. Yes, almost always natural, feibings in my country is too expensive. I mean tooooo expensive. No good stainers around here. Sometimes wax plus oils.