Making a magnetic knife holder | epoxy resin and plum tree

Рет қаралды 27,925

4 жыл бұрын

This was a bit of a trial project. I have never done a knife holder. Pouring epoxy and planing some planks was an easy stuff. But figuring out what magnets to choose and how deep imbed them into wood. That was the most interesting part. It turned out fantastic. Looks super vibrant and works just great.
Best wishes to @simon.bites
SOUNDTRACK:
Huma-Huma - Whiskey
Ampletunes - Bones
WEBSITE:
chiselsplay.com
FOLLOW:
/ chisels_play
/ chiselsplay
www.tiktok.com/chiselsplay/
Sincerely THANK YOU!

Пікірлер: 77

@semoffg 2 ай бұрын

gorgeous work bud!!

@ScreaminBaby Ай бұрын

Really nice!

@ilianadimitrova397 Жыл бұрын

That's the most beautiful knife holder I have seen. Great job!

@Chiselsplay Жыл бұрын

Thank you so much

@pablos.cargoe7101 Жыл бұрын

Excellent product and presentation! Thank you.

@Chiselsplay Жыл бұрын

Thanks for watching

@zedmelon 8 ай бұрын

Beautiful piece. Good work!

@MyNigellus 4 жыл бұрын

This looks brilliant, satisfying. Good job

@Chiselsplay 4 жыл бұрын

thank you!

@KelAZ1 3 жыл бұрын

This piece is both beautiful and functional! I hope your friend appreciated it!

@Chiselsplay 3 жыл бұрын

Thanks a lot! I hope they do;))

@brianhenry5834 3 жыл бұрын

very nice, just the ideas I needed. thanks

@sinisterwoodworkcarpentry 8 ай бұрын

Awesome! 🤘

@ericselstad8257 3 жыл бұрын

That was great! Nice job!

@Chiselsplay 3 жыл бұрын

Thank you!!

@hardrock1826 Жыл бұрын

Excellent workmanship. I'm hoping to make a magnetic knife block myself. You have certainly given me some really great ideas. And something to work toward. The video was inspiring. Thanks

@Chiselsplay Жыл бұрын

Thanks sooo much! Best of luck with your project;))

@user-du2of3lh1g 5 ай бұрын

Crazy I got about 6 pieces of plumb drying and I'm going to do the same thing beautiful wood!!!!!

@scottpetrie8707 3 жыл бұрын

Awesome

@RandomAs77 2 жыл бұрын

Looks great 👍

@Chiselsplay 2 жыл бұрын

Thanks;)))

@iloveschicken6527 4 жыл бұрын

Very nice!

@Chiselsplay 4 жыл бұрын

Sissy B thanks

@jonathancordova9301 3 жыл бұрын

Looks beautiful man. 👌🏽

@Chiselsplay 3 жыл бұрын

Thanks 🙏

@cbfowler 3 жыл бұрын

Well done... and what a lovely knife holder you've just made. I love it. Well done. :-)

@Chiselsplay 3 жыл бұрын

Thanks a lot! Thanks for watching!!

@JohnathanAulabaugh 2 жыл бұрын

Very nice

@redendeleon2208 4 жыл бұрын

very good

@paulchallinor5013 2 жыл бұрын

Neat!

@steveskinner8088 2 жыл бұрын

Nice work

@Chiselsplay 2 жыл бұрын

Thanks 🙏

@innuendo4469 10 ай бұрын

Do you get a lot of marriage propositions? I am joining the queue! BEAUTIFUL workshop, BEAUTIFUL holder, and you seem a good person.. and I am in love now. not sure with what more - your craftmanship, your persona or your workshop

@esencix 3 ай бұрын

Amazing video. Questions: what type of oil did you use at the end? did you sprayed water before sanding? and did you use the finest sandpapers? also, what did you use in the small holes before sanding, is it more epoxy or glue? thanks for a great video

@user-kl6sw9pq2i 4 жыл бұрын

Не зря подписался, увидел отличную идею.

@brianhenry5834 3 жыл бұрын

FYI, just bought the magnets on Amazon prime, check the N rating, some sites don't specify

@mrpatching9586 2 жыл бұрын

Please list the products you use in your explanation and links to buy it. Thank you.

@Dusty727 2 жыл бұрын

Great job! I love it! Must try. What kind of silicon do you use to hold the wood?

@Chiselsplay 2 жыл бұрын

Just regular off the shelf one

@phananhnguyen1819 4 жыл бұрын

Labas diena :”>

@kc8lae 4 жыл бұрын

Great job on the video. Love how you built the knife holder! Was wondering what size magnets you used?

@Chiselsplay 4 жыл бұрын

Thanks! I've used a row of 10 (50mmx10mmx5mm N52) neodymium magnets 3-5mm below the surface. It was an overkill, you could stick an axe on it (small one :D). Anyhow, I could have use a bit smaller magnets.

@kylekm1000 3 жыл бұрын

That looks awesome! What type of finish did u use? I’m also making something similar and trying to decide what to use. I was thinking mineral oil/beeswax since it will be in contact with knives which will cut food.

@Chiselsplay 3 жыл бұрын

I’m pretty sure I used rubio Monocoat on this one. My thought behind it was that it’s not a cutting board and food won’t have direct contact with it. It’s like tabletop. You put your tools on it, but you don’t eat straight from it (at least not too often:DD). Though foodsafe finish is also a good choice, but some refreshment might be needed from time to time.

@kylekm1000 3 жыл бұрын

Makes sense! Thank you!

@colormereal6731 4 жыл бұрын

what kind of tapes are you using between 1:21 - 1:35? Making a knife holder of my own :)

@Chiselsplay 4 жыл бұрын

I’ve used simple masking tape on the bottom of those planks just to prevent silicone from seeping into the wood grain. And I’ve used simple packing tape (make sure it’s made out of polyethylene) so epoxy wouldn’t stick to it. Any tape made out of PET(E) will work, packing tape seems to be the cheapest. Good luck with your build!!

@buckkw5108 Жыл бұрын

Mommy bought you some nice tools..😅

@DJP89 4 жыл бұрын

what are those brackets called that you screwed into the back to mount to the wall?

@Chiselsplay 4 жыл бұрын

keyhole bracket. Thanks for watching!

@jayD26665 2 жыл бұрын

What kind of tape is that?

@eladsinay6914 2 ай бұрын

i noticed you disconnected your vacuum hose when planing. Any reason you do that? lol i ask but i think i know because i didnt and i just found out what epoxy can do to your dust collection system ... the pvc pipes, the motor and pretty much every part of my system.

@Chiselsplay 2 ай бұрын

The reason was a bit different. We used to giveaway our wood dust and chips to be used as bedding for horses. Epoxy was not on the wish list for these gorgeous animals 😂

@eladsinay6914 2 ай бұрын

@@Chiselsplay haha i never knew that they use the wood chips for horse bedding. my niece rides every week. ill have to see if i can do the same. They really are majestic beautiful animals. ut i still stand by epoxy going thru the dust collection is like a cancer.

@cbfowler 3 жыл бұрын

Hi, sorry if this is a stupid question, but let me ask... is the magnet within the grey resin or are they magnets which you wedged into that slot you cut into the wood with that Festool machine?

@Chiselsplay 3 жыл бұрын

I have placed the magnets in the slot. Epoxy is just for looks;))

@banxietyfree 3 жыл бұрын

Great video? What is the thickness of the wood between the magnets and the knives?

@Chiselsplay 3 жыл бұрын

Thanks for watching! Its about 3mm. But it all depends on the magnet size and strength. I did a test with the magnets I got and 3mm seemed to be the sweet spot

@TheKevinlefty Жыл бұрын

Great work! Where can i order those magnets?

@Chiselsplay Жыл бұрын

Somewhere online I’d guess:D it’s been a long time ago since I’ve built it

@Chiselsplay Жыл бұрын

Chiselsplay.com if you were asking about the workpiece

@jriquelmy 4 жыл бұрын

Awesome job! So how deep did you place the magnets into the wood? Do you have links to the magnets and hanging hardware you used?

@Chiselsplay 4 жыл бұрын

I don’t have links, I bought those locally. I’ve installed magnets from 3-5mm below the front face. I’ll check the magnet dimensions for you

@Chiselsplay 4 жыл бұрын

I've used a row of 10 (50mmx10mmx5mm N52) neodymium magnets

@m1ci 4 жыл бұрын

@@Chiselsplay very nice piece of work. I have a question about the chosen magnets. Do you think stronger/or less strong would be better? Will you take another magnets if you would do the same thing again? Also, would you recommend to install the magnets closer to the front face? For example 2mm. I am asking because I'm also planning to do smth similar :)

@Pens-and-morez 2 жыл бұрын

What magnets do you use?. Link please

@Chiselsplay 2 жыл бұрын

I bought it locally. I used small neodymium magnet bars. You’ll have to google it. Thanks for watching;))

@Pens-and-morez 2 жыл бұрын

@@Chiselsplay ok thank you for replying 😀

@victorialong6767 2 жыл бұрын

I have tools and knives. I have only the fridge to use what suggestions you have for a proper build? 2 cleavers, 2 chef's, 4 petit chefs, 4 santokus, 1boner, 1 carver, 1 bread, 4 filet, 1 deli, 2 can openers, 1 sharpener, and 2 shears? I assume a few magnetic strips i have black stainless fridge and want complementary holders. Contact me if you would want the task of the build epoxy of course.

@Chiselsplay 2 жыл бұрын

Could you reach me out via krikstopaitis@gmail.com. BTW, Thanks for watching!!!

@mrpatching9586 2 жыл бұрын

Actually do you know the strength of the magnets please.

@Chiselsplay 2 жыл бұрын

Thanks for asking. I've used a row of 10 (50mmx10mmx5mm N52) neodymium magnets 3-5mm below the surface. It was an overkill. Anyhow, I could have use a bit smaller magnets.

@buckkw5108 Жыл бұрын

Mommy bought you some nice tools..😅You don't have any knives? Come to work at Mama's you can make em all day long..lot of money in it..🙄

@almitchell5768 3 жыл бұрын

No instructions as the video went on, no explanation as to why he did things in a certain way or order, sorry not a helpful video for someone trying to learn

@Chiselsplay 3 жыл бұрын

Thanks for your opinion. I guess I’ll have to make a new one with proper explanation;)) anyway, thanks for watching!! If you have any questions about the build, I can answer those for you;)) cheers!! Stay safe;)