Making a Rolling Road Base to Test the RC V8 Car!

  Рет қаралды 1,057,750

JohnnyQ90

JohnnyQ90

5 ай бұрын

I must make the gearbox work, the car has the power to use the 3rd gear and it continues to accelarate.
The engine can be easily fixed. I just need a piston/rod and we're back!
-----------------------------------------------------------------------
►Toyan V8 engine ➜ bit.ly/3V14CG3
►Starter kit ➜ bit.ly/3ldJZXe
►Other Toyan engines ➜ bit.ly/3wxlMAz
►Other V8 engines ➜ bit.ly/3Li50KX
Extra 10% off code: q90
#stirlingkit #WhyWeEngine
---------------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90

Пікірлер: 417
@kovacevd
@kovacevd 5 ай бұрын
You should make a mini dyno 😊
@Dymond-qu8lh
@Dymond-qu8lh 5 ай бұрын
Thats what a rolling road would be
@king_br0k
@king_br0k 5 ай бұрын
With more sensors and maybe heavier rollers this could be one
@TestECull
@TestECull 5 ай бұрын
He did and it was pretty shit.
@CreateEverything9
@CreateEverything9 5 ай бұрын
Good idea man 👍🏻👍🏻
@christopherdriscoll7282
@christopherdriscoll7282 5 ай бұрын
Half way there already.
@Sun-ut9gr
@Sun-ut9gr 5 ай бұрын
Damn, it even throws a rod to scale! ❤Built for a good time, not for a long time! 🤣
@Trickniner
@Trickniner 5 ай бұрын
I was thinking the same. That is a proper engine failure.
@TheGeezzer
@TheGeezzer 5 ай бұрын
Yes I thought exactly the same! I must admit...I was impressed!
@wuddadid
@wuddadid 5 ай бұрын
The same thing happened to my Skoda Octavia last year 🥲
@williamcharles7340
@williamcharles7340 5 ай бұрын
Same thought. Amazing!
@LilMissMurder3409
@LilMissMurder3409 4 ай бұрын
XD
@burgertowngarage
@burgertowngarage 5 ай бұрын
I like that your bandsaw seems to have a turbo blowoff valve :)
@Wazaarbazaar
@Wazaarbazaar 5 ай бұрын
Sounds more like a loose sawbelt
@peigen7151
@peigen7151 5 ай бұрын
That full throttle on first gear was amazing. Can't wait the next video
@quadmechanic2896
@quadmechanic2896 5 ай бұрын
All your videos are inspiring and relaxing, keep up the great work!! P.s. Dont forget about the supercharger. Even if it doesn't make significant boost it's still cool to hear an RC V8 whine!!
@alienrace
@alienrace 5 ай бұрын
No doubt! I think the thing worked, he just didn't richen the mixture enough so it bogged.
@mrpoopybutthole6314
@mrpoopybutthole6314 5 ай бұрын
Never thought I’d see the day when a nitro engine threw a rod
@rigididiot
@rigididiot 5 ай бұрын
The OS twins were fairly known to throw a rod when overrevvedin a steep dive...
@enigma9789
@enigma9789 5 ай бұрын
You never had a Traxxas trx 2.5r? lol
@thomasgoodwin2648
@thomasgoodwin2648 5 ай бұрын
Oil pan failures (when the oil pan fails to hold the contents of the engine) get you every time. ✌🎅👍
@thaphreak
@thaphreak 5 ай бұрын
🎄Merry Christmas🎄Johnny, Thanks for another year of awesome content! I can't wait to see what you have in store for us in 2024!
@danawalters-xu5nu
@danawalters-xu5nu 5 ай бұрын
The good old fashion throwing a rod trick huh? Never gets old.
@redallaround66
@redallaround66 5 ай бұрын
What a bummer, that was a cool little v8. Would definatly love to see a scale dyno to test with, im sure you could figure out the numbers for calculating the results :)
@BIGGELATO
@BIGGELATO 5 ай бұрын
My man needs a long block build with forged internals and billet parts at this point 🤣🤣
@kams724
@kams724 5 ай бұрын
It’s time you machine your own engine
@wesleytaylor1199
@wesleytaylor1199 5 ай бұрын
May the mill be with you my son
@ChummiaChan
@ChummiaChan 5 ай бұрын
This is an awesome Christmas gift to see this thing in action! I love tiny V8 engines put to actual proper work!
@johncaballero8013
@johncaballero8013 2 күн бұрын
Impressive machinist! Magnificent build.
@RC-Closer1313
@RC-Closer1313 5 ай бұрын
Can’t wait to see it up and running again!! It’s such an awesome build. That guy on here said “it’s just a kit, anybody can build it” talking about the engine kit that you START with… is he blind about ALL the custom components that you design and make? Or the car that the engine goes in? He is obviously jealous of your engineering skills and your ability to build something so freaking awesome!! I’ll bet that dude has trouble building a Tamiya car😳… lol
@fabricationnation8052
@fabricationnation8052 5 ай бұрын
It's a bummer you didn't have footage of the rod coming apart.....exelent build my friend
@XxKoRupTioN
@XxKoRupTioN 5 ай бұрын
We’ll never see this thing finished lol
@trabantfreak2370
@trabantfreak2370 5 ай бұрын
so cool to hear and see a RC car making actual gear changes.
@snjert8406
@snjert8406 5 ай бұрын
That shot where you had the entire roller on the lathe and removed the top layer. So. Good. Also, ouch. RIP connecting rod hahaha
@DylanMartinRacing
@DylanMartinRacing 5 ай бұрын
I dont know what’s more cool. This whole ass rig. Or the fact that it threw a rod through the pan like a real V8
@barthanes1
@barthanes1 5 ай бұрын
Awe, man! She threw a rod. This is bad news for you, and great news for me. Now I get to see you make replacements. I'm glad to see your transmission is coming along too. If I had to guess why second gear is not engaging, I would say it's maybe the hard edges where the dogs mesh. Or maybe too much friction.
@LUCALANCONELLI
@LUCALANCONELLI 5 ай бұрын
It's insane how skilled you are on crafting such small pieces with this level of precision while making everything work together. I'm looking at the gearbox and wondering if heat can be a thing in the long term and if it's possible to add something to cool it down. Another thing that came to my mind is to try and balance the wheels (maybe craft some yourself with aluminum? Or just add some weight where neede to balance it off) in order to get less vibration, more grip and less mechanical stress on chassis, suspensions and probably the differential too. I know nothing about rc cars and I'm not a mechanic either so I'm just trying to guess possible issues and most likely saying things you already noticed yourself or decided they are no big deals
@Ni9kye
@Ni9kye 5 ай бұрын
Jhonny, Glow Plugs (spark plugs) are heat graded meaning if you use a hotter plug like the ones you replaced, will advance ignition timing, cooler plug will have opposite effect. your Rod failiure could be because you have inadvertantly advanced the ignition timing!
@Wazaarbazaar
@Wazaarbazaar 5 ай бұрын
Its not a spark plug... the name says it?
@Ni9kye
@Ni9kye 5 ай бұрын
yes your correct, its a glow plug, johnny reffered to it as a spark plug in his video. In any case Not all glow plugs are the same, they are heat graded also there is a diffrance between 2 stroke and 4 stroke glow plugs. it gets a little complicated, but you can measure a noticable diffrance in performance. Peramiters such as compression, nitro content 2 and 4 stroke and desired rpm all come into play. a glow plug manufacture called Model Techniques made an extensive data sheet, listing cases for a full range of their plugs. Back in the Day i had a hot rodded Spitfire using up to 40% nitro methane. Selecting the correct plug was essential... in any case i more than doubled the power( according to the propeller it could swing) Fun times =) @@Wazaarbazaar
@Ni9kye
@Ni9kye 5 ай бұрын
Somthing else to consider maybe to add a varible resistor in the glow plug circut, inorder to adjust the voltage going to the glow plugs, this would in theory allow you to dial in when the mixture ignites, like a crude method of advancing/retarding when the mixture ignites inside the combustion chamber, just a thought.
@russcole5685
@russcole5685 5 ай бұрын
​@@Ni9kyethe power to the plugs is only on during start up, once running they stay lite but the fuel burning
@Ni9kye
@Ni9kye 5 ай бұрын
yes i wasnt 100% sure, i do know some glow motors used to run a constant current to the plugs to prevent them from going out. in which cast it would be possible to run a very cold plug, and utlise a constant current and use a resistor to ignite the fuel at the desired timing! @@russcole5685
@pasathecat8354
@pasathecat8354 5 ай бұрын
finally we see those wheels moving!
@yasha1928
@yasha1928 5 ай бұрын
RIP to that connecting rod, you did well soldier 🫡
@Modna89
@Modna89 5 ай бұрын
Never thought I'd see a tiny v8 throw a row.
@jcooper702
@jcooper702 5 ай бұрын
I'll be honest...I mainly watch the videos to hear that satisfying "click" whenever you torque the fasteners!
@pappaflammyboi5799
@pappaflammyboi5799 5 ай бұрын
The day JohnnyQ90 speaks will be the day he wins the internets.
@phat_gunther
@phat_gunther 5 ай бұрын
The fact your posting on chrstmass day is dedacation. The best channel ever :)
@TranceFur
@TranceFur 5 ай бұрын
Wow, even the catastrophic failure was realistic! 😛
@gibaxavier
@gibaxavier 2 ай бұрын
You are a genius! Congratulations!
@justinnamilee
@justinnamilee 5 ай бұрын
Oh damn, rest in power V8. May your rebirth be that of the pheonix and astound us all with your glorious power.
@seanp2k617
@seanp2k617 Ай бұрын
Real RC hobbyist right here, making your own parts like we did back in the good old days, not this ready-to-crash all-plastic stuff they’ve got out today. We had RC planes for decades with very few problems, but when RTF drones that use a phone as a controller came out, we got all these new regulations. I’m all for getting more younger folks into the hobbies but enough of them don’t pay their dues first and just get into trouble with stuff.
@JT-2
@JT-2 5 ай бұрын
"Everything will be fixed" *Can You Feel My Heart starts playing*
@jonecliptic
@jonecliptic 5 ай бұрын
Amazing work
@ArgyriST_
@ArgyriST_ 5 ай бұрын
Αδερφέ σε παρακολουθώ χρόνια, είσαι πραγματικά απίστευτος.
@vaggosbokaris3310
@vaggosbokaris3310 5 ай бұрын
Παίζει δυνατά να είναι Έλληνας
@ArgyriST_
@ArgyriST_ 5 ай бұрын
@@vaggosbokaris3310 είναι είναι
@aserta
@aserta 5 ай бұрын
0:21 rather than brass, you have two other options (that go two different ways, depending on what you want) that are softer than brass, but stronger than plastic. Tin and aluminium. Tin's going to be heavier and aluminium lighter. I'm not sure what you want of that part, but brass may be too strong and break other bits. Just a thought thrown out there. Merry Holidays! Next year you're going to hit 2 million subscribers for sure! :)
@TheLtVoss
@TheLtVoss 5 ай бұрын
Kinda yes but I doubt that AL will have the hardness too resist the inpact of the dog clutch without Plastic deformation but for sure if he isn't gonna asing a point of fallure the system will do it for him 😅 I recommend a shock absorbing ruber disk in the drivetrain
@SilvaDreams
@SilvaDreams 5 ай бұрын
Nah I'd suggest oil infused bronze, it's specifically made for sleeve bearings and the like so they self lubricate.
@senseishitz2305
@senseishitz2305 5 ай бұрын
bro your vids are so relaxing the asmr of the machines is so good
@dasraiser
@dasraiser 5 ай бұрын
Always fantastic builds, regarding the gearbox, a well timed strobe light may help here :)
@danstump3686
@danstump3686 Ай бұрын
That roller bed you made would be ideal for simple dyno.
@Skiridr22
@Skiridr22 5 ай бұрын
The clutch seems to be holding up great 👍🏾
@ISupportTheCurr3ntThing
@ISupportTheCurr3ntThing 5 ай бұрын
Been watching yoh make this car for what. 2 years now? I love it man. Awesome work
@bakerap2211
@bakerap2211 5 ай бұрын
Damn, it even threw a tiny rod. That’s hilarious.
@protejrm4738
@protejrm4738 5 ай бұрын
waiting till this man makes his own engine
@chrisprobert6
@chrisprobert6 5 ай бұрын
More rotating mass, will need xtra support. Love these vids💪👍
@tomjom4865
@tomjom4865 4 ай бұрын
Love this amazing engineering keep it up
@HBHR
@HBHR 5 ай бұрын
Awesome work keep it up man always looking forward to new mods and builds 🤟
@madmikecustomrcrockcrawlers
@madmikecustomrcrockcrawlers 5 ай бұрын
Happy holidays my friend, been here waiting to see if you were going to work on this car before the end of the year. Can't wait to see all of your hard work pay off and see you enjoying this beautiful car. Keep up the awesome work you're doing.
@paulguerrero972
@paulguerrero972 5 ай бұрын
I can smell those nitro fumes from here!!!! 😅 Awesome job!!!! Bummer on the engine. I guess we get a new video!!!!😅
@ofcs7336
@ofcs7336 5 ай бұрын
Merry Christmas everyone, excellent video as always, this year there will be more good projects.....🤗🤗🤗🤗🤗
@PorscheRacer14
@PorscheRacer14 5 ай бұрын
Uh oh, Rodney came a knocking. I've only ever seen that on full size engines, but I guess when you're experimenting and pushing the limits, even the scale engines can do the same thing.
@PAINFOOL13
@PAINFOOL13 5 ай бұрын
Merry Christmas Johnny 🎉 Nice vid 👌🏻
@chuckjjohnston4568
@chuckjjohnston4568 5 ай бұрын
One of the worst days ever is the one where your engine decides to put a leg out of bed. I've been that soldier once, not an experience I would care to repeat. Love your videos, sorry everything didn't go to plan, Dude.
@jakhazardzn9862
@jakhazardzn9862 5 ай бұрын
Thanks Dude yet another great video
@713Ace529
@713Ace529 5 ай бұрын
Very nice attempt J. 👍
@szymoniak75
@szymoniak75 5 ай бұрын
interesting how even such a tiny rod does so much damage
@cassianomartin2699
@cassianomartin2699 5 ай бұрын
I use ATF oil on my nitro engines when not using them a long time, works quite well. Never had any bearing issues.
@Jrad117
@Jrad117 2 ай бұрын
Trial and error, sir brilliant work.
@WittyScrewdriver
@WittyScrewdriver 5 ай бұрын
You should put knurling on the rollers for better wheel grip
@wtfobiden
@wtfobiden 5 ай бұрын
Precision is artwork
@llspragulus
@llspragulus 5 ай бұрын
Merry Christmas to you and the youtube fam!
@nikolaikalashnikov4347
@nikolaikalashnikov4347 5 ай бұрын
12:15 Connectingrod screw came loose, one side is far more out.
@barrygauci9933
@barrygauci9933 4 ай бұрын
Also bloody brilliant work my friend I genuinely appreciate the work you put in.. your machining is solid man solid as a 🪨
@jessixox
@jessixox 4 ай бұрын
Even the best engineer has a thrown rod.
@cjcantrell80
@cjcantrell80 4 ай бұрын
“Oh darn. Pieces broke. I’ll just have to make more, and better.” I wish I could work in this shop everyday.
@ThePorscheFanBoy
@ThePorscheFanBoy 4 ай бұрын
It sounds so so good bro keep it up you are doing Amazing work
@JustCallMePCra
@JustCallMePCra 5 ай бұрын
What gets me about these engines is. They can range anywhere between 1,000 and 6000 each when he gets a new one he opens it up and runs it right out of the box which usually results in terrible performance and something being broken. Then in the next video you see that you need about $100,000 worth of tools and equipment and about a million dollars worth of knowledge to keep them running
@tommdschohns8718
@tommdschohns8718 5 ай бұрын
Nice one. I made an test stand for my inline 5 cylinder engine. I had some problems with the crank breaking apart but i made a new one out of a solid chunk of steel. I guess setbacks are part of the game right?
@WoodsPrecisionArms
@WoodsPrecisionArms 5 ай бұрын
Bro you do the most beautiful and amazing job on your machine work and that’s coming from a gun smith who machines guns on the lathe and I thought my stuff was small and tedious - not even a match to what you do
@parkerbirch5286
@parkerbirch5286 5 ай бұрын
My favorite Christmas present, thanks.
@Maurice_Of_Wisdom
@Maurice_Of_Wisdom 4 ай бұрын
THE ENGINE UNDER LOAD AND THROTTLE HAS THE SAME SOUND CHARACTERISTICS AS A REAL V8 IT ALSO FAILED LIKE ONE AMAZING VID AS ALWAYS! ❤
@hydraplasm
@hydraplasm 5 ай бұрын
Anyone else's heart sank when he showed that .. (No spoiler) .. at the end??
@ClavellMoton-lk5lq
@ClavellMoton-lk5lq 5 ай бұрын
I like the things you build awesome skills Sir
@wrenchg3954
@wrenchg3954 5 ай бұрын
i always am just waiting for JQ90s next video. in the world today surly biggest gripe has got to be the time between vids. but to my personal opinion the just next level build ideas, and then the powerplant choices with the overall functionality and melodic cohesion. is second to none. JQ focuses on perfect harmony must be achieved because nothing else is acceptable. oh i for got to mention that he's gotta be a self taught, at least in the years ive watched JQ i dont remember seening any custom parts ever tossed to machine another. first shot and never wastes material. JQ when machining could more likely run circles around most machinist instructors here on the tube.
@s_low_s10
@s_low_s10 5 ай бұрын
wonder how much it would take to make this a dyno
@shize9ine
@shize9ine 5 ай бұрын
Make sure your glow plug wires don’t get melted on the headers
@georgiahertzler9403
@georgiahertzler9403 5 ай бұрын
Nice,that sucks the rod broke, and the damaged it did ,wow,sorry,but good video
@georgiahertzler9403
@georgiahertzler9403 5 ай бұрын
😊 thanks
@allanfreret6188
@allanfreret6188 2 ай бұрын
Omg, sound look like a really v8 ❤
@hiperformance71
@hiperformance71 5 ай бұрын
Wow, the conrod left the chat! Fortunately, it only damaged the oil pan and not the cylinder block!! It's time to built a new version maybe? Happy New Year!!
@Timpan1999
@Timpan1999 5 ай бұрын
The dogs on gears in racing transmissions are usually not fully 90 degree to the gear, there's a small angle so that if the gear only slightly engages it will pull itself more into engagement.
@WubbleDubble1
@WubbleDubble1 4 ай бұрын
Honestly it’s a very cool car. With the size of it, 1/4 would be a child power car and 1/3 would be a go kart size! Keep it up, I’ve been watching you for years and hopefully more years to come.
@phoenixsui
@phoenixsui 5 ай бұрын
Amazing, it really sounds like a V8 too. i love V8s :D
@scottmitchell7302
@scottmitchell7302 5 ай бұрын
Nice work johny
@BLVCK6
@BLVCK6 4 ай бұрын
Good lord my ears never heard such harmonious mini v8 iml.
@danw1955
@danw1955 5 ай бұрын
Ouch, too bad about the engine, but nice work on the transmission. A little tweaking on the brass dogs will probably get it to shift. They're always fairly loose in a MC transmission. Usually the 'pin' side is almost round, rather than elongated, to allow plenty of slack for engagement.😉
@MatthewBarnes-2023
@MatthewBarnes-2023 5 ай бұрын
I'm curious as to how much power this V8 makes and then u should test the v12 on this too
@FarmerFpv
@FarmerFpv 5 ай бұрын
I would like to see this car on the road shifting gears as soon as possible. PLEASE! lol. Happy Holidays to the Mini Motor GOAT!
@wags9777
@wags9777 5 ай бұрын
Next should be double 4 to 1 with an X pipe exhaust
@ASFerreira
@ASFerreira 5 ай бұрын
Awesome video 🎉 congrats
@team187rc
@team187rc 5 ай бұрын
Theres another guy on here he trying to stuff same motor into a 1/10th infraction stunt truck Look at this rig its on another level. The build quality 👌🏼 is amazing, heck of a job sir!!!!
@jeremykastrup6907
@jeremykastrup6907 4 ай бұрын
Im impressed with carnage. Rod release is a good one
@CreateEverything9
@CreateEverything9 5 ай бұрын
Perfect project, great video, I love you. Merry Christmas to everyone. Project for the future small dyno for performance measurement.😂
@michaelspencer6693
@michaelspencer6693 5 ай бұрын
Been waiting for the next one
@New2RC86
@New2RC86 5 ай бұрын
Let's be real here man this is fkn awesome one of the coolest vids I've watched in a long time the talent it takes to do some of this work is far beyond my process of thinking lol 😆 so cool brotha thanks for the vid
@Sonex1542
@Sonex1542 5 ай бұрын
Machine new parts... You have the talent.
@SaltyMcBoatFace
@SaltyMcBoatFace 5 ай бұрын
my theory on what went wrong is the added weight in the gearbox , i think the extra centrifugal force may have caused it to become unblanaced under load and put too much force on the bottom end bearings , personally i would re design the geabox from a stonger & lighter metal than brass
@napadan
@napadan 5 ай бұрын
Nice and relaxing 😎
@samtek30
@samtek30 2 ай бұрын
vraiment très bien! (Very good)
@samtek30
@samtek30 2 ай бұрын
je suis Français et je n'ai pas encore le meme niveau que toi...(I'm French and I don't yet have the same level as you...)
@Heavy420D
@Heavy420D 2 ай бұрын
That's sick 🤘
@hunnybunnysheavymetalmusic6542
@hunnybunnysheavymetalmusic6542 5 ай бұрын
FINALLY DITCHING THOSE PLASTIC PARTS!!! TOLD YA THEY WOULD EXPLODE!!! GLAD TO SEE YOU DOING THE RIGHT THING!!! 👍
RC V8 (1:5 Scale) Test RUN!
7:21
JohnnyQ90
Рет қаралды 451 М.
小路飞姐姐居然让路飞小路飞都消失了#海贼王  #路飞
00:47
路飞与唐舞桐
Рет қаралды 93 МЛН
Маленькая и средняя фанта
00:56
Multi DO Smile Russian
Рет қаралды 5 МЛН
Do you have a friend like this? 🤣#shorts
00:12
dednahype
Рет қаралды 40 МЛН
RC V8 Car w/ SUPERCHARGER & Auto Gearbox!
18:45
JohnnyQ90
Рет қаралды 383 М.
E1 - Weismann's 12 Speed 4WD FWD Transaxle
19:57
Pete & Michele's Shop
Рет қаралды 18 М.
Man Builds Hyperrealistic RC Plane at Scale | Airbus A350 Replica by @RamyRC
23:50
I Turn Electric Drill Into V8 Powered Drill
13:26
Lets Learn Something
Рет қаралды 2 МЛН
1/3 scale V10 RC car part 17, Dyno run.
8:20
Keith57000
Рет қаралды 2,7 МЛН
I Build REAL V8 Engine | Assembly and RUN
14:56
RESTORATION KAMASUTRA
Рет қаралды 572 М.
TRAXXAS XRT gets Big Block motor (MORE POWER!!)
14:05
Kevin Talbot
Рет қаралды 2,2 МЛН
Extremely Realistic Micro OHV V8 Sounds Amazing!
18:15
JohnnyQ90
Рет қаралды 259 М.
как спасти усилитель?
0:35
KS Customs
Рет қаралды 387 М.
How charged your battery?
0:14
V.A. show / Магика
Рет қаралды 2,2 МЛН