Johnny, you should mill out some 1 piece rotors for that blower and open up the ports so it actually flows air.
@technicbuilder6410Ай бұрын
And if he gave them some twist they would probably be smoother.
@1one3_RacingАй бұрын
There's a reason nobody does forced induction on RC engines. It doesn't work.
@yoda3549Ай бұрын
real screw/roots blowers have Teflon strips to help seal. i dont know if he could do that too.
@everettstormyАй бұрын
@@1one3_Racing rc airplaned have been using superchargers for a long time lol
@1one3_RacingАй бұрын
@@everettstormy is this an aeroplane?
@GunandgameguyАй бұрын
I have dreamed of seeing a V8 RC car since I was like six thank you for making this I couldn’t stop smiling
@filmgunproductions4448Ай бұрын
The sound never gets old, and hearing it on a moving chassis outside is just fricken amazing
@radweldАй бұрын
You need to ensure the fuel tank remains pressurised by feeding exhaust pressure into it. this way, fuel is always forced into the engine.
@GeomancerHTАй бұрын
Very nice way to blow things up.
@kynghype9715Ай бұрын
@@GeomancerHT Thats how nitro engines work, do your research lol
@tm5123Ай бұрын
@@GeomancerHT All RC nitro engines do this, pretty much.
@mattinwinkymgАй бұрын
@kynghype9715 Geomancer probably thinks EGR valves are a good thing too 😂😂
@kleetus92Ай бұрын
@@mattinwinkymg Lol... oddly enough I got into an argument with someone about that and PCV systems too!
@WhiskeyGulf71Ай бұрын
It stalls sideways because the wheels have stopped turning ! It’s lost its forward momentum, at low rpm you have practically no torque available from the motor, it’s not a diesel engine & you have a huge flat spot in the power.
@andruwmartinez4129Ай бұрын
I'm sure this has a one way bearing preventing that issue
@chevyman5618Ай бұрын
@@andruwmartinez4129it stalled In the beginning of the video when he engaged the clutch then had to give it gas to take off running
@rsquared9703Ай бұрын
It’s a traditional manual transmission. When the clutch is engaged you can’t just stop. I know he put that Revo transmission in but that doesn’t change the direct drive nature of the setup.
@danw1955Ай бұрын
No, the carbs are losing their prime because there's no tank pressure. The diaphragm pumps on the carbs depend on intake pulses to function, and at high rpm the pulses are too close together to provide sufficient volume. That's why you have run a line from the muffler to pressurize the tank. This is done on a lot of RC planes as well for the same reason.
@jimsimone2651Ай бұрын
For curiosity sake since I'm not a mechanic or engineer or mechanically incline... would a check valve "back flow preventor" work similar to plumbing applications?
@KettletriggerАй бұрын
A heavier flywheel may help with the shutoff problem.
@fra572427 күн бұрын
Why??
@goosebox906426 күн бұрын
@@fra5724more inertia, but the problem there is it wouldn’t be as rev happy. It should still rev plenty though because it’s a
@fra572426 күн бұрын
@@goosebox9064 ty
@someonesomewhere_77726 күн бұрын
It would actually reduce the engine RPM; plus he's already burning out clutches on the flywheel he has, so this might not be a good idea. The comments above about pressurizing the fuel tank with the exhaust is probably an easier solution and won't require any additional modification. Seems to me like the system is losing fuel flow to the dual carb setup in a tilted position which is very indicative of low fuel pressure.
@Kettletrigger25 күн бұрын
@@someonesomewhere_777 A heavier flywheel will not reduce engine RPM. It WILL slow engine response due to more inertia, which is why a lightened flywheel is a common performance modification. The downside to a light flywheel is a tendency for the engine to lose RPM quickly...sometimes so quickly that it dies. Which is what might be happening here. Slowing engine response will not hurt the clutch. If anything, it will increase clutch life due to more gradual changes in RPM. Johnny has a lathe and a mill - adding weight to the flywheel shouldn't be a big deal (if that in fact is the problem).
@blueexneticАй бұрын
The effort and determination of this guy is insane. Every time I see one of your video's in my for you page I don't even hesitate to click on them. I am proud to be one of your 1.87M subscribers!
@HolloMatlala1Ай бұрын
I am a here as well....Count me in on this comment
@mickgibson370Ай бұрын
I myself! I had raced Car, Motorcycle, and RC!
@htothec1Ай бұрын
100% agreed. This man has the best channel on KZfaq. One hell of a smart man
@giorgoskaras5399Ай бұрын
Φίλε Έλληνας είσαι σε βλέπω τόσο καιρό και δεν με πήγε ο νους ότι είναι Έλληνας. Μπράβο ρε φίλε συγχαρητήρια, τέλεια βιντεάκια
@panosbosst4176Ай бұрын
Φίλε και εγώ έπαθα πλάκα τον βλαιπω πάνω από 2 χρόνια και δεν μου είχε περάσει ποτέ από το μυαλό 😮
@user-rp8zv8nl6n25 күн бұрын
Ναι ισχύει παιδιά ο τύπος είναι πολύ μυαλό!
@proximo1033Ай бұрын
That is becoming some serious automotive design, i mean that colling and exhaust, you grow my man!
@jared9108Ай бұрын
If you think it’s fuel sloshing make baffles in the tank to reduce the liquid movement. And also the low rpm if you throw the drift tire with a plastic sleeve you can draw your conclusion of fuel loss and or rpm being to low
@CptDallasАй бұрын
Review how gas RC PLANES do it. They go inverted and still have power.
@FSShenanigansАй бұрын
Full size car our fuel cell has foam in it to prevent sloshing may be easier than making baffles
@ZaydHakimАй бұрын
That rc has 4 more cylinders than my Subaru 💀
@dylancoventry9122Ай бұрын
I’ve been watching since you got the V8 and I’m stoked to see it driving and skidding around bro, well done 🙏
@johnkilo3Ай бұрын
At first I was worried JohnnyQ90 wasn't devulging that he is sponsored by Toyan or Sterling Kit, and that he actually gets all these engines for free. You're supposed to let people know if you're sponsored. To be honest, though, I think these videos have made me want these small engines less and less the more of them I see. Imagine spending $1700 on this "supercharged" V8, plus everything else needed to get it to run (and even more if in an RC chassis), and the thing just breaks almost immediately because of terrible manufacturing and tolerances. I'll stick with enjoying watching someone else spend tons of money on getting them to work right.
@OhHeyItsBillyАй бұрын
I don't mind he's sponsored or not. I love the creative process in his videos. I think he does a great job. I love watching all of the unique machining parts and 3D printed parts. Those engines seem on the surface really awesome but I can tell they break catastrophically really easy, the tolerances in the machining process are probably not good at all even though it "looks" good. Being sold extra attachments like superchargers that actually hinder and hurt the motor instead of actually giving more power. You would have to have a bunch of expendable income and enjoy this as a hobby because these motors seem like they're really low quality and horribly made and unreliable.
@johnkilo3Ай бұрын
@@OhHeyItsBilly I don't mind if he's sponsored either, but you're supposed to disclose it.
@Man9482429 күн бұрын
bit rude i do say
@ThatOneGuyWithTheEye24 күн бұрын
You can literally buy a real roadworthy car with a real motor for that price. Most of mine have cost less
@robbosrc13 күн бұрын
I know right here I’m Australia it’ll cost me about 2.5k for just the engine
@thegarynatorАй бұрын
This thing is so dang cool! Thanks for sticking with it and continuing to share!
@mikellewis2346Ай бұрын
Best v8 rc ive seen running an driving so far on KZfaq....❤
@rcOhioАй бұрын
Great test drive! It sounds so good! Thanks for sharing JQ90!
@austinkoeppen6122Ай бұрын
I'm just impressed with how well it starts, I've seen lots of others struggle with these.
@ValerianHD29 күн бұрын
make it loud
@mrtambourineman61073 күн бұрын
He should learn to drive it first!
@ValerianHD3 күн бұрын
@@mrtambourineman6107 no, make it loud first
@lordbunny2416Ай бұрын
U could cut a two slots into the metal, to maintain balance of the clutch and into the friction material, and use two dowel pins plus a lil glue to keep it from delaminating!! Just a thought!! Keep it up, love the Vidz!!!!
@doranjohnson5365Ай бұрын
This dude and these builds inspire me to go learn how to do stuff. So freaking cool. Thanks for documenting this for us, Johnny!
@lhionaleobary2582Ай бұрын
its been more than 2 years followed you and i'v seen this little thing grew and now its 90% finished i am so proud of you. gg and continue let's go to the 2mill
@TheYetiSlayer24 күн бұрын
That's absolutely epic!!! Great job man!!🙌🏻👏🏻
@adamdiaz844229 күн бұрын
I bet that felt great getting it out for a spin congrats bud awsome work
@laurentdarcq5624Ай бұрын
Amazing ! Superb ! Congratulations !
@mohammadaminranjbar9008Ай бұрын
very exciting V8 sound! great work!
@17111993DAVEАй бұрын
I bet youre so happy to see it coming together. I know your viewers are. Way cooler than normal RC cars nitro or battery. Well done.
@mattculpepper6444Ай бұрын
Awesome video as always, Sir. Long time subscriber. As an American, I always love seeing a fire breathing V8, in any form. I hope you can get the blower figured out. Keep up the great work Mr. Q90!
@AngelLuisTrinidadАй бұрын
I will like to shrink myself so I could drive it. Dispite the repairs it needs I still find it perfect and awesome. Great work Johnny.
@waynewilliams855414 күн бұрын
Just get the four- stroke sound is amazing. Phenomenal piece of engineering all around!!
@brettc5386Ай бұрын
I've been waiting for this video for so long and I'm glad it's finally here. But also I can see it needs some refinements in the power band, especially in the low rpm, knowing your potential it would be amazing to see you make turbos like you did for the twin cylinder 4-stroke, but have two different sized turbos and connect them in a compound setup so that way you can get the most torque down low and horsepower up high.
@tuna3461Ай бұрын
That sounds awesome dude holy fuck. This is like the next level in realism. Hearing it pass you even at those low speeds is insane
@tuna3461Ай бұрын
How loud is it? Is it painfully loud like a typical nitro engine?
@richardoeser5643Ай бұрын
Sick! Love seeing them drive and operate
@flashforum939Ай бұрын
What a sweet ride - love the sound
@joequashnock155223 күн бұрын
So exciting to see that beast off the chain and thrashing about! Just like any scratch built DIY project, things are going to happen. I have 100% faith that you will work out the bugs. Looking forward to the next update!!
@NoobAlikeАй бұрын
glad to see it finally roam free on the ground! all that work!
@bigdadgigachad3042Ай бұрын
CONGRATS 🎉👏🏆
@user-pd1vg1qq1x29 күн бұрын
creating a body for the car once it is mechanically sound would be so cool! , it would literally be a mini car! , great vid once again!
@slyknezz6862Ай бұрын
Very Cool!!! Such a unique sound for an rc!
@shkiper4224Ай бұрын
Sounds awesome !
@just.jose.youtubeАй бұрын
Thank you good sir for making our dreams come true! 🙏🙏🙏 A V8 RC... 😍 What a great set if skills you have!
@AceNinja211213 күн бұрын
Johnny is an engineering genius!
@Evans_Man27 күн бұрын
Δεν περίμενα ότι θα έβλεπα τέτοιο διαμαντάκι στην πόλη μου! Πολλά συγχαρητήρια!
@lolbots13 күн бұрын
what's your city?
@shize9ineАй бұрын
im excited to see you make alloy rims next ep!
@Tyblerone23 күн бұрын
Dude these videos are so friggin' cool.
@joshuasterling214424 күн бұрын
It seems like there is a lot of hope for this project to actually come all the way through. Looking great so far and I can see it getting the last 25 percent improvement and then it probably will be the best rc car of its type on KZfaq. It starts, the throttle is responsive and its fast enough to warrant the effort.
@samghost1311 күн бұрын
It sounds awesome!
@TheBeetle7Ай бұрын
Ein Geiles teil, super Arbeit .
@mattbellina548528 күн бұрын
Really freaking awesome!
@jrtate112329 күн бұрын
It sounds cool as hell 🤙🏽
@dfgaJKАй бұрын
sounds sooo good!
@RJ-wy6cx15 күн бұрын
That is absolutely awesome😮
@atishayajain1862Ай бұрын
This thing's gonna burn some rubber 🔥🔥🔥
@mrluken-officialАй бұрын
This thing sounds good!
@fobbitoperator36209 күн бұрын
I can only imagine how long it took you from concept, to making this video of it driving. R&D is an unimaginably arduous task of success & failure, until you get to the point of consistant successive runs of pure V8 stomping runs of smiling, until your face hurts. Some people think making these "toys" is a waste of an adult's time, energy & resources. What low brain wattage floofs don't understand is, this is the very type of activity which gives some of us a reason to wake up on the weekend mornings. Never stop researching, developing, assembling, testing, & succeeding!
@gavriilk744028 күн бұрын
Μπράβο φίλε , Πάχη Συνέχισε έτσι, Και πάλι μπράβο 👍🇬🇷
@Dollfin3424 күн бұрын
This thing is so sick, can’t wait to see the final version
@jakedeutscher6 күн бұрын
This thing is cool man!!
@auwz66Ай бұрын
Excellent stuff! I think you might benefit from a baffle or two (or foam) in your fuel tank.
@Dingle-Berries25 күн бұрын
This guy is smart and clever to figure it out, he knows his car well. Dude built it from scratch
@emerilnutАй бұрын
Sweet! So glad you're at the testing phase. I've been watching the build process and am REALLY IMPRESSED! I don't know if anyone has mentioned it yet or I may grant forgotten if you already thought about this, but have you implemented some runaway protection? You know, how to make the car stop if it loses contact with the radio while under full throttle. Always an issue with nitro RC cars.
@mafroh4733Ай бұрын
I can't wait to hear it tuned!
@jz6425 күн бұрын
Badass good work
@phildavis1282Ай бұрын
Keep it up johnny your just too cool 👍
@TheOfficial_InsaneStangАй бұрын
Dude, ya got this!!! 🤘😎
@fra572427 күн бұрын
Great video!
@EJ-7427 күн бұрын
So awesome to see it driving...
@GavinYАй бұрын
The sound is so good
@flodar1548Ай бұрын
Great job
@projectcar9488Ай бұрын
About time! Make it run alrwady
@sch0neDKАй бұрын
Nice to see it driving :-)
@Tinman6354ty12 күн бұрын
Fantastic model !!! Can’t wait to see it with the supercharger working and a flat out run for top speed. Not much into drifting and burning up the tires. Would love to have one of these, first one I’ve seen with the actual engine being used in a vehicle.👍🏻
@justmechanicthings22 күн бұрын
Wonderful progress Johnny sounds like a nascar
@vincentoden8625Ай бұрын
i think part of the reason it stalls when u slide is causee the engine just doesent have enough energy to keep going when the wheels slow down after a slide. real cars do the same if u spin and dont disengage the cluch
@djbuzzardАй бұрын
Excellent!
@MartyGramRC29 күн бұрын
@JohnnyQ90 - just a thought: set up the throttle and clutch actuations on the same servo (or multiple servos from the same channel) - as you give it more throttle, the clutch starts to engage, and as you let off, the clutch disengages. This would take an incredible amount of fine tuning, but I’d imagine would work extremely well, but still provide that realistic functionality you’re looking for.
@jetegtmeier71Ай бұрын
That is SUPER cool 👍👍👍
@chrisoconnor311919 күн бұрын
You are awesome!
@antoniskotis520822 күн бұрын
Then start from control is very important and awesome
@letsdosomething6691Ай бұрын
I agree with a lot of these comments about the stalling issue. I’m leaning towards the idea that was mentioned about the clutch being still engaged while the car comes to a complete stop. That would definitely stall my car at least. That also probably played a roll in the clutch breaking. If it’s a fuel issue though, my suggestion is try a bigger fuel line, and a carb bowl if they don’t already have one. The bigger line will keep it from hydro locking, and the bowl will help with whatever air still gets through. As for the super charger I’m on team solid rotors lol. Those have to be one, solid, smooth piece to get rid of the slap. They have way too much wiggle being three pieces each. In other news; line lock? Totally unnecessary and would probably destroy the transmission but man would it be cool if it worked. Just sitting there roasting the tires and then turning it off and peeling away. As always, love the video. Keep up the awesome work, and I can’t wait for the next one.
@Pigpin13Ай бұрын
That thing sounds so mean. Love it
@leonardodiamond4374Ай бұрын
this is dope
@raulbustamante833727 күн бұрын
The sound is brutal
@jaybomb5022Ай бұрын
Pulling air bubbles into the fuel line. Add a splitter with 2 inlets inside the tank. Or a piece of fuel filter foam to stop the sloshing.
@benjammin307825 күн бұрын
Amazing totally 👍 on board with your drive in making outer perfection on a machine that’s thrills the senses of WOWness in the ability to create kudos to you bro 🎉🎉🎉🙏👍
@Pelmen.Nik5031Ай бұрын
Круто получилось, осталось только корпус подобрать и будет пушка 👍
@TRFH1Ай бұрын
stalling- could be fuel pickup location on your tank you are using, also can play with the length of the hose from the exhaust to the tank to help keep constant pressure in the tank.
@MDBensonАй бұрын
I'd add a baffled fuel cell to the list too, maybe put some foam in there and or make something custom with a baffled swirl pot built into it, the sort of thing you see on drag cars. The sudden direction changes and inertia were visibly causing the fuel to climb up the side of the tank which as the fuel goes down are probably starving the feed line.
@Shadow0fd3ath24Ай бұрын
thing sounds SOOO good man! Id go to a positive pressure fuel system like nitro cars run normally where it gets some exhaust air to pressurize it
@holdmybeer3931Ай бұрын
It’s getting faster and more responsive 👍
@u.e.u.e.27 күн бұрын
What a nice toy! 😃👍
@mutstumboАй бұрын
Would putting pressure from the exhaust to the tank help with the stalling? Kinda like they do or did with the 2 stroke RC engines? Just a thought. I could and probably am way off base though. Either way, still an awesome video and car. Thanks for sharing.
@projectcar9488Ай бұрын
I’m really excited to see it god
@beyondquestion23 күн бұрын
This is dope, I like what ur doin!^^ Awesomeness!, thx for the good vid, with NO MUSIC, just true sounds, including tools, very rare today!! \O>
@luap9991Ай бұрын
that is awesome
@Darcho13Ай бұрын
It has a terrible understeer, the car doesn't want to turn. And if you apply too much power, it immediately oversteers. I suggest you check your differential (if exists) . This issue causes extra load to your engine and clutch while turning. The car came from a long way, and I love how you build it with great effort and create quality content. Keep on, friend across the pond!
@triynizzlesАй бұрын
I would love to see new rotors for the supercharger!! There's so many videos out there with little superchargers and turbochargers for micro engines like this and none of them ever work. it's so sad I want to see one that works. you can do it!!
@christopherlenahan3906Ай бұрын
My guess is rotor shaft flex and the tolerances of the supercharger synchro gears: -That tri-lobe rotor looks to be a 3D ratio, with 3 segments I doubt it has the rigidity to stay straight under boost. -The synchro gears would need to have insanely tight tolerances and sub tenth backlash to maintain the lobe seal with such small gears/rotors. Even operating with a wet seal design. -If you do decide to make your own rotors, may I suggest a helical tri-lobe.
@gameboy3800Ай бұрын
the motor shutting off when skidding could be something like the oil going to one bank of cylinders instead of staying in the pan? but then itd start running way rougher so idk. maybe you can add one of your older centrifugal superchargers to it instead of the roots blower? with only the one turbine it shouldnt have any collision issues.