Making A Russian Hatch Leather Phone Case Using A Sewing Machine

Рет қаралды 7,220

2 жыл бұрын

I am making a russian hatch leather phone case in this video. I am going to use a sewing machine for the stitching, you could do this part by hand sewing, all the other techniques that I show are relevant whether you hand sew or use a machine. I was very pleased with the final result.
This is the other video that I mentioned, where I made a phone case hand stitching the leather.
• Making A Leather Phone...

Пікірлер: 46

@yeskov7814 2 жыл бұрын

Привет из Москвы.

@jimathey6153 2 жыл бұрын

Hi Harry, OLD LEATHER SMITH here, Very Nice, I like it, I myself do 2 steps different, 1. I ALWAYS install chrome tanned Sheep inside so there's no way 2 get scratches 2 the plastic face, I even do this 4 a lap top case, any time there is a possible chance of scratching, on phones, 2. I always have a flap, keeps out RAIN, GOD'S BLESSINGS ✝️⚾🙃

@jimc4731 2 жыл бұрын

Fine job Harry! Keep up the good work JIM

@steveparise52 2 жыл бұрын

Love to see your leather work

@Oakleaf700 Жыл бұрын

Gorgeous!

@xa9590 Жыл бұрын

Nice work

@harv700 2 жыл бұрын

Thank you ... Great to see a leathercraft video again!!!!

@wmc7870 2 жыл бұрын

A bone folder in a phone holder! 🙂 Great video Harry. Wayne.

@leslieharper5897 2 жыл бұрын

Hi Harry love your videos it would be interesting if you done a tutorial on making Moccasins.

@erhandmade4466 2 жыл бұрын

I like your videos. They are very useful. Every time when I watch them I learn something new. Thank you very much and keep teaching me🤓

@harryrogers 2 жыл бұрын

Thanks very much.

@patriotcam1776 2 жыл бұрын

Your a genius. I been at leatherworking for 5 months now. I'm still learning. I tried to make this case myself and I made it too tight. Your idea saved me ty

@harryrogers 2 жыл бұрын

That's great Michael, thanks.

@frankdenton171 2 жыл бұрын

Harry, Thank you for your input and advice.

@judithclauss5515 2 жыл бұрын

Excellent. Thank you!

@TundraRun 2 жыл бұрын

Great craftsmanship as always Harry

@JoKe4244 2 жыл бұрын

Good evening from Norman, Oklahoma, USA. Thank you for sharing your talents and expertise.

@harryrogers 2 жыл бұрын

Hello SouKan, and thanks.

@charliekingpine3893 2 жыл бұрын

Many thanks that's a good tip, nice one

@flatdog- 2 жыл бұрын

Thank you Harry

@bigchiefleatherworks7245 2 жыл бұрын

Excellent, I often have trouble with phone case dimensions.

@PaulSmith-rd8yc 2 жыл бұрын

Nice KZfaq clip Harry. Will check it out when I see you next

@user-qi1cm4ig4s 2 жыл бұрын

My favorite cologne is English leather, old formula)))

@servicesepatupaksurya8507 2 жыл бұрын

Need it..

@geoffharris7297 2 жыл бұрын

lovely case where did you source the leather from?

@zeez9053 2 жыл бұрын

Nice work got one in stiffer leather with an elasticated pull tag to make it easier

@harryrogers 2 жыл бұрын

Hi that sounds good, and no danger of it falling out.

@zeez9053 2 жыл бұрын

@@harryrogers no snug fit .Thats why there is a pull tab that that pushes it up from bottom as it’s tricky to pull out with fingers only

@ooslum 2 жыл бұрын

Hi Harry, always watch but not made yet. I practice in my head and thought an additional strip of leather between the 2 sides as a spacer might stop the pinching. Have you tried it or does it cause other problems? Nice case👍

@harryrogers 2 жыл бұрын

Hi Alan, perhaps give it a go, though a bit of pinching keeps the phone in position.

@2194steve 2 жыл бұрын

Hi Harry love your videos, I have a question for you what’s the best sort of thread to use on leather upholstery both for a machine and by hand? Mines a singer 66 hand cranked from 1935 works a treat! Fabulous stitches . Many many thanks Regards Steve

@harryrogers 2 жыл бұрын

Hi Steve for the Singer 66, Gutterman upholstery thread is good. I use bonded nylon in my bigger machines and Ritza Tiger thread for hand sewing as it does not rot.

@MUSZTARDA18 2 жыл бұрын

Do you have your store?

@trevymond 2 жыл бұрын

How do you oil this machine, can you please make a video on how to?

@harryrogers 2 жыл бұрын

Hi I am sorry but I no longer have this machine. There are manuals for it on the ISMACS website.

@frankdenton171 2 жыл бұрын

Harry, I have a question. What is your thoughts about the 4180 Adler post machine?

@harryrogers 2 жыл бұрын

Adler have a good reputation. I do enjoy the bottom wheel feed as well as the top roller for wallets etc...flat sewing items...does this Adler have that or is it a feed dog.....choice really depends on what you want the machine for.

@frankdenton171 2 жыл бұрын

I have a shoe repair shop and I'm also doing a lot of things like purses, belts and restoration projects that require a lighter stitch than what I have with my patching machine.

@harryrogers 2 жыл бұрын

@@frankdenton171 Probably not a bad option...Best if you can try a machine to check it suits your needs. Mine is good for shoes wallets and other fine stuff. A 335 type cylinder arm is another option...Good for bags.

@Messenger_of_Allah313 2 жыл бұрын

Could my singer 201k do this with something like Gütermann R753 silk, Red or Royal blue would look awesome ??

@harryrogers 2 жыл бұрын

I think it probably could...I have not tried the silk, bit the Gutermann upholstery thread would probably work.

@Messenger_of_Allah313 2 жыл бұрын

@@harryrogers I should have a shipment of gutermann nylon coming from Germany soon. That stuff is not available in Finland same with that gutermann buttonhole silk. Good thing Germany and Finland are both EU countries.

@harryrogers 2 жыл бұрын

@@Messenger_of_Allah313 Yes lucky to be in the EU!

@Messenger_of_Allah313 2 жыл бұрын

@@harryrogers Well yes and no liked to order small stuff from Japan, but now everything is under tax. So are English silver items antiques, books etc. Damn

@danielcastillo-cg2bq 2 жыл бұрын

Hi Friend I was trying to find your latest video here on KZfaq I have a question. And I don't know if you can help me. I have a pfaff 138 and want to use a small roller foot and wondering if you can help mewith this I saw a video from a pfaff 134 they use a roller foot needle plate and feed dog they mentioned is the same like the singer 31-15 wondering. What is the right roller foot . Needle plate and feed dog for my pfaff138 hope you can help me thanks for reading

@danielcastillo-cg2bq 2 жыл бұрын

Also I forgot to mentioned my pfaff138 also is zigzag