Great work. Plus here's a couple of tips from a (now old and) very experienced wood worker. 1. Add a 90 degree cross piece underneath and at the beginning of your track board. Always quicker. 2. Leave your track board sticking out the other side of your fence for clamping (hand spring clamps are enough) as well as a 45 degree guide (cutting with saw at 45 degrees). 3. Trim the abrasive paper a little further, even micro granules will dull your blade. I've added these refinements after decades of using this kind of system. Also, an 8 foot version for large panel board can be helpful too. I've usually kept both in the workshop.

For goodness sake, use a push stick when using that circular saw! It takes a small lapse of concentration or a moments slip to lose fingers/thumb (@27secs). I have been working in wood for well over sixty years and the most precious and valuable item in the workshop is yourself. Keep safe and thank you for posting.

The simplest design I've seen yet works great, great idea to use a sandpaper backing to provide grip, well done.

i just built one. Never so easy for me to using a circular saw. Before I was scared to use it and afraid to cut my finger and never can made it straight cut. Now I did. Thank u so much for this design easy and simple. As female, I love it.

You left me speechless man! That is a super effective tool with no effort and you made it in less than 1:30 minute !! If you will come to Italy I'll offer you a coffee

Очень понравился столик 4 в 1ом. Из всех просмотренных на ютуб самый простой и доступный в изготовлении.

This guy is the Einstein of DIY.

It's amazing how stupidly simple ideas there are to make work easier. :-))

Great idea and I made mine today. Instead of sandpaper, I put small drops of clear silicone on the bottom and it works great. I also bring two spring clamps with me. I plan to keep it in my truck to use to break down plywood I buy at Lowes in the parking lot. Cool idea.

The simplicity is genius 😂👍🏽

That’s pretty darn clever! I think I would still use just a spring pinch clamp on the ends to keep it from moving though. To be safe.

I have seen lots of DIY saw guides but this is simplest and easiest of them.

Best and simplest one I’ve seen so far. Thanks

I got a piece of wood flooring with the rubber backing on it, been saving for I don't know what. Will see if it works tomorrow. Nice idea, thanks for your time.

The sandpaper on the bottom is an awesome idea.

I would use the rubber mesh that you can buy at Home Depot and other places. It's more secure and will not cause any damage. And it comes in various colors.

Brilliant! As Muadibe mentioned, "Simple is always the most practical". I'm going to make one this weekend. Thank you for sharing this idea!

That's a very interesting idea with the sandpaper; I'll have to try it. I have used a variation of this for 40 years. I use 1/4" fir plywood for the base (no need to go thicker), and a narrow strip of the same 1/4" ply for the guide. I never clamp the guide; because the good side of the wood is face down for a clean cut, I use two 3/4" nails to secure the guide, which when done I loosen, leaving the small nails in the guide for next time. Works very well.

I like you because you do simple tools to help us. Thanks a lot for share with us.🙏🙏🙏🙏🙏

Call me paranoid, but I would still clamp it. Especially on more expensive wood. Love the idea and I can use it for other things. Thanks

Haha, finally I find it fast and easy to make it, GREAT

Ah, nothing like the ol K.I.S.S. principles without all the "bells and whistles" (and B.S.)! Nice job!

Превосходно! Быстро! И конструктивно!

Very good idea for a framer, quick, simple cheap and don't have to mess around with a chalk line.

What a brilliant and simple idea. Thank you.

Me abriste la mente... ahora si me dan ganas de aprender a trabajar la madera luego de ver tus vídeos. Sos un genio

This is really good for rough work. Not so much for finish or fine work. I really like this device. I'll make a couple of them with different grits.

That is quite simply genius! Simple but brilliant. Thanks for sharing the tip.

That is so simple yet so useful and something a person with my skill level can make.. Thanks for the great idea

Another "now why didn't I think of that?" moment.👍👍👍👍👍

Just nice. I have Never thought about Sand Papier 👍👍👍👍😉

The most simple. The best Idea!!!!!!

Simple and easy are the best! Thank your for sharing.

When I saw the window in the suggestion margin, I thought - oh no, not another one! I was WRONG! Simple and effective , great idea and uncomplicated video. Thanks for both. 👍🏼🤓

The BEST ideas are usually the SIMPLE ones - WELL DONE! Subscribed. Sadece güzel açık bir huş ağacı kullanmakla kalmayacak, aynı zamanda kontrplağın su geçirmez bir yapıştırıcıya sahip olmasını sağlayacağım, çünkü bazı yerler çok nemli bir havadır.

Everyone stop making circular saw guide videos... this is the best of the best.

best and simplest hack for this problem i’ve seen.

Amazing simplicity in this!!! Love watching you work!!

Anti-slip circular saw guide would have been more descriptive. Anyway it's a great idea.

De los mejores de youtube. Simples, sencillos, pero muy funcionales sus creaciones.

In my country this would be called stupidly simple😁 great work mate your head is working unbelievably straight forward👍👍

Ty for making a video that doesn't over complicate. Exactly what I was looking for!

It's nice and inspiring how far you've come, seeing where you are today and where you started. Congratulations.

Отлично, мои поздравления за работу и ваши учения, привет из Аргентины.

And for those of you that don't want to put scratches in the piece you retain... replace the sandpaper with neoprene strip from ebay.

I like this idea. It’s simple yet effective. And cheap.

Fantastically simple 👌 thank you

I'm making that, thank you, right to the point!

Simple, practical. Good job and thanks for the idea.

Great idea !!! Outstanding work. Thank you for sharing.

No entiendo el idioma pero el video, es muy claro, y la guía facil, de hacer. Muy práctico. Felicitaciones a su autor ! Saludos desde Colombia

Ustam merhaba. Çok pratik ve kullanışlı bir klavuz olmuş. Ellerine sağlık.

Absolutely brilliant!.. so easy. Glad I saw this before spending ages making one of the other, fancier designs :-))

where was my brain when i made mine? sometimes the clamps move the guide (too often), most times they get in the way. cool tip!!!

Simple is always the most practical.

Оригинально! А я заказал лезер, чтобы линию направления рисовал, а надо-то было всего лишь фанерку отпилить. Отличная идея сделать направляющую, автор молодец!

Skateboard grip tape would be easier to get. Basically sand paper but more durable

Clever, thank you.

Simple yet genius! Great idea buddy.

Thank you. I’m going to make my own instead of buying.

very simple good idea Allah bless u

Excellent. The big brands won't like it though.

Other easy and practical project. Tomorrow I'll make mine. Thanks

Excellent jig! Keep it simple....... Thank you.

Great idea!! I could use a guide at times, but the cost verses the use was tough. I will jump on your idea and make myself one. Thanks for the video.

Brilliant in its simplicity!

Very simple and efficient. We'll done my friend

Thanks for not dragging this out. Good, short video.

I give this Idea a 8.5 / 10

Great idea,nice

So simple but great, thanks going to build one.

Don’t use sand paper. Use a bicycle inner tube cut in strips. Glue two or three strips lengthwise on the bottom of the guide.

Simplicity at is finest.

Excellent and the simplest way to explain it!

NICE VIDEO ....! VERY GOOD PROJECT ...!! KEEP GOING ...

Very good idea... I will surely make one... Self clamping with Sandpaper

Best, and simplest one, I've seen yet!!

Outstanding work. I'm lost for words

I am going to make one of this for me. Great projet!!! Excelent idea.

Спасибо. Хорошая идея по использования наждачной бумаги.

Love the idea of using sandpaper as a gripper.. Nice one

Awesome tip, thanks for sharing

Excelente, me gustó mucho... Es simple, fácil de hacer y sobre todo eficiente.

Lol I will have to modify mine after seeing this, great idea 😹🤗

So simple and we didn't have to watch a 20 minute video and listen to a hole bunch of crap

Amazingly simple and effective!

Excellent idea! Thanks!

Lovely, how simple I wish I had thought of this !

Very good video, simple and direct

Simple and attractive, Thanks.

So the real secret is in the sandpaper........ingenious !

Wow! That's Great Idea.

Super simple but a great design. Thank you for sharing 👍

Man! Why didn't I think of that? Great job.

The best of the best !! (Less is more)

Thank you. Great idea !! You made my day.

Elinize sağlık. Pratik ve güzel bir uygulama. Benim için çok yararlı oldu.

Very clever man God bless you.

It's good for rough wood or to be painted surfaces, but for laminated or finished plywood it will spoil the surface.

very simple very effective very useful