In this video I'll show you how to make a very simple copper leaf to be used in a variety of projects. #copper #maker #metalwork #crafts #metalworking #howto #how #beginnerproject
Пікірлер: 24
@laurareutter69286 ай бұрын
Good demo. It would be great to show steps that you only mention, like smoothing the edges of the leaf.
@timmillervideo10 ай бұрын
I had no idea Ron Swanson worked with copper!
@nopigeon3 ай бұрын
Nice! but how do you 'preserve' the color in the copper for long term. It dissipates with time and atmospheric conditions
@DaveDoesMetals3 ай бұрын
I use a clear coat, the one I use is ProtectaClear because it seems to keep the colors the most accurate. Unfortunately any clear coat will change how light refracts off the surface and changes the color. The upside is that the color shouldn't change much if at all after the clear coat is on because it'll be protected from oxidation. Hope this helps, thanks for commenting.
@nopigeon3 ай бұрын
thank you.... but it's ok if the colors change and evolve. Brings even more life into the piece?
@DaveDoesMetals3 ай бұрын
It certainly can, but if you've got a specific color in mind for the final project I would do some test pieces and see what colors happen after the clear coat. Best of luck in your endeavors.
@THEMIGHTYGAMMONTV Жыл бұрын
It looks great man
@DaveDoesMetals Жыл бұрын
Thank you!
@hughtempleton8640 Жыл бұрын
Absolutely beautiful ❤️ Thank you for sharing your amazing talent 👏
@DaveDoesMetals Жыл бұрын
Thank you!
@mandranmagelan9430 Жыл бұрын
nice :-)
@DaveDoesMetals Жыл бұрын
Thank you!
@Zack-of-tradez Жыл бұрын
I've found that an auto body hammer works well for this as well
@DaveDoesMetals Жыл бұрын
That's a good idea! Thanks
@riptidewilly62644 ай бұрын
What thickness of copper are you using ?
@DaveDoesMetals4 ай бұрын
I think that I was using 26 gauge for this (16 mil). You can use thicker or thinner though, thicker being a little bit harder to cut and work.
@mariposasrizadas19248 ай бұрын
🎉🥀
@desireemccrorey6600 Жыл бұрын
Thanks for the video. I've been dabbling in copper sheet art and fire painting recently. I was wondering about the durability of the copper coloring from the flame painting. Since copper oxidizes so readily, will those colors last or does the copper have to be sealed?
@DaveDoesMetals Жыл бұрын
In my experience, the flame painted colors will last for at least a few years if inside, I still have a few roses from several years ago that were flame painted. The colors have slightly dulled over time though. A lot of creators use a coating to seal in the colors but because any coating will change the way light refracts on the copper, it will change the colors a bit. For example, a shade of purple I like will change to a light brown after coating. Which is a shame. I use rustoluem crystal clear on my roses a lot, and I know people who make copper jewelry use ProtectaClear to coat their copper. I have yet to use it though, as it's a little expensive. If your pieces are going outside or you live in a humid area, I would coat them. I hope this helps.
@getoffthecouch54236 ай бұрын
How thick should the copper be? Where is the best place to buy copper online?@@DaveDoesMetals
@dawnsaffel2620Ай бұрын
Thanks , I had a person come to our club that wants to make a copper leaf windchime. This is perfect info🎉
@DaveDoesMetalsАй бұрын
Glad I could help, good luck with the wind chime!
@dr.froghopper67119 ай бұрын
You should have annealed the copper before you did anything else.
@DaveDoesMetals9 ай бұрын
The copper was dead soft before I did anything to it. Fully annealed. Didn't need to do anything.