Making a Steel Cabinet part 1

No video

Making a Steel Cabinet part 1

Рет қаралды 167,478

Күн бұрын

This video is part one on making a steel cabinet. The material is 16 gauge cold rolled steel and angle iron. I apologise for the choppiness, still getting the hang of this whole editing thing...

Пікірлер: 44

@mitch3384 Жыл бұрын

I've just been given a MIG welder (and an Arc Welder.. but something tells me I'll be starting with MIG) and I need to build lockers for my sharpening business so people can drop knives and tools off, fill a form out, leave payment and lock it all safely outside my house. Thanks so much for this video, it gets me so far ahead in planning.

@LakeridgeWelding Жыл бұрын

That's awesome, sounds like a fun project!

@jonathangerbino2621 2 жыл бұрын

I love how the dog keeps slowly inching the frisbee towards you as the project goes on. Excellent work on the cabinet body!

@andersonpyaban8042 3 ай бұрын

Very skilled fabricator

@hms1688 2 жыл бұрын

It looks good, we are also a strong manufacturer of sheet metal fabrication in China, with high quality and competitive price.

@SuperdaMachine Жыл бұрын

very useful video

@danocronopolis 6 жыл бұрын

heckin' nice project. also, super nice shop! i love the grinder rack at 5:40. wouldn't mind a shop tour vidjeo, i dig your organizational setup.

@LakeridgeWelding 5 жыл бұрын

Thanks, I appreciate that! Good idea on the shop tour video, it would be a real short one though haha! Thanks for watching!

@saadalenazi 3 жыл бұрын

Great work man.

@adityabiyani387 4 жыл бұрын

you are the best thanks

@LakeridgeWelding 4 жыл бұрын

Thanks for the kind words, glad you liked it!

@dnr9886 3 жыл бұрын

Making identification attempts for the variety of twice-speed songs in the background audio is successful as additional entertainment

@LakeridgeWelding 3 жыл бұрын

Haha some of it might be 4x to 8x speed!

@martinsteelcustomizer6233 4 жыл бұрын

Nice

@martinsteelcustomizer6233 3 жыл бұрын

Nice..job.

@jonathanclendenin3604 3 жыл бұрын

I just did a project that used 16ga steel sheet. Had some warping, but I see where you used the angle iron, I'm assuming that was to counter that?

@LakeridgeWelding 2 жыл бұрын

Yeah, I think this was 14ga so not quite as prone to warpage. I didn't have access to a brake press at the time and I wanted to see how it would turn out with the angle. I didn't plan on having the doors formed, that was kind of a nice surprise, I was planning on building them with angle like I did the cabinet.

@iggydayo 5 жыл бұрын

Part 2 please!!

@gilbertovelez345 3 жыл бұрын

REALLT STEEL ANGLE WITH STAINLESS STEEL THATS DO NOT CONTAMINTED? OVIUSLY YES

@jerga2002 6 жыл бұрын

Please part 2. Pleaaaaase

@LakeridgeWelding 6 жыл бұрын

José Enrique Roca Sorry it's taking so long for part two, having a new baby kind of changes plans! I will try to get it put sooner than later though. Thank you for enjoying the video!

@fro0tyl0opy87 6 жыл бұрын

Mitch Dunlap hi would also love to see part two. I'm thinking of making myself a metal mail box to hang on my gate but I've no idea where to start hence why I'm watching your videos. If you have any tips for a noob like me, I'd really appreciate it! You're doing a great job by the way and congratulations in regards to your newborn :)

@Dev_Everything 5 жыл бұрын

kzfaq.info/get/bejne/eqhjia2nq6u7eaM.html

@mickjagger8621 Жыл бұрын

What about the door's dude

@philrose7716 Жыл бұрын

How much would it cost for kitchen cabinets in steel?

@LakeridgeWelding Жыл бұрын

A lot. All professional kitchens are stainless steel, it looks great but it's gotta be expensive. Not to mention, there is A LOT of skill involved to fabricate sheet metal without warping, denting, scratching, etc.

@philrose7716 Жыл бұрын

Thank you. Wish you were in Los Angeles

@davidradloff8319 3 жыл бұрын

Is Budweiser the only beer that works for this kind of project or will any cold beer do?

@LakeridgeWelding 3 жыл бұрын

Anything cold, that can respectably be called a beer, will do.

@TreasureDivers 6 жыл бұрын

Great informative vid, thanks for sharing but please get your dog a welding mask, his eyes can be damaged too ! Good luck with your channel

@adamralstein1012 4 жыл бұрын

Brilliant work. Please advice on the sheetmetal thickness for the top and sides. Kind regards

@LakeridgeWelding 4 жыл бұрын

Thanks for watching! I believe I made it all out of 14 gauge steel. I did beef up the top by adding a length of 2" square tube. I wanted the top to be a bit more stout since I was putting a bench grinder and a belt sander on it.

@adamralstein1012 4 жыл бұрын

Great stuff thank you

@AdrianHiggins83 5 жыл бұрын

Hope you continue to make videos

@christiaanvorster1988 Жыл бұрын

What are the width of the sheet metal you used

@spineguy444 4 жыл бұрын

Looking to do something similar. What are the cabinet measurements?

@mpgracing 3 жыл бұрын

At the beginning of the video what is the benefit of shimming the pieces off the table ?

@LakeridgeWelding 3 жыл бұрын

If you're table isn't flat, mine has a crown to it so the middle is higher than the edges, then this helps keep your pieces straight. If you can get away with only using 3 shims then, in theory, your part should come out flat no matter how jacked up your table is.