I've been a woodworker for over 30 years and there's nothing wrong with using the miter gage and rip fence the way you did in this video. There's no off cut off to get pinched between the blade and fence. Keep up the great work!
@axa.axa.2 жыл бұрын
Hard to believe a guy with this amount of experience and quality tools would use both rip and miter at same time.
@j-woodworking95732 жыл бұрын
Sorry about that. I'll be careful sir.
@danielhanawalt4998Ай бұрын
Good sturdy work bench. I made one similar years ago, maybe 15 or more. Served me well but thinking about building another for different purposes. My new one will be one that folds so it can be out of the way when I don't need it. I have a small shop that has to double as storage and a place for the mower. Nice work on your bench.
@kstewart36573 жыл бұрын
Just finished making this workbench. Easy to build and absolutely solid when completed. Thank you! 😀👍
@j-woodworking95733 жыл бұрын
Pleased to hear that. Thanks for watching sir.
@gregr24342 жыл бұрын
Almost done making this, thanks for the great design!
@mickhvac39083 жыл бұрын
Love that you’ve shown a build with screws and not making it too complicated. Yet this piece is very solid and will serve its duty well.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@richardnash60093 жыл бұрын
Another fantastic project. Thank you 🙏🙏🙏🙏
@danmarcu7554 Жыл бұрын
One of the best video on this subject! Respect!
@zaffman3 жыл бұрын
I’ve been waiting for a video like this one. Very well designed and implemented! I will use this as a basis for my saw bench design. Thank you J!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@ubiratanoliveira6923 жыл бұрын
Se continuar vendo seus vídeos acabo aprendendo alguma coisa. Parabéns.
@danmarcu7554 Жыл бұрын
Just great! I save the plans. Thank you very much for sharing with us!
@sapelesteve3 жыл бұрын
Nicely done J! Now you need to add a vise or two & some hold downs on the top. I know that those wheels are lockable but I think that you will have some movement of the table when planning wood if it's located in the middle of a shop. Anyway, great work........... 👍👍😉😉
@tallermdf23013 жыл бұрын
ME ENCANTAN TUS TRABAJOS, MUY BUENOS, TE FELICITO!! SALUDOS DESDE BUENOS AIRES, ARGENTINA!!!
@frankstover34443 жыл бұрын
Well done brother! Love it!
@j-woodworking95733 жыл бұрын
Thanks for your visiting my channel again sir.
@mrylo13 жыл бұрын
I like it! One of the best looking 2x4 benches I've seen in a while. The only thing I would add is some more bracing for the shelf on the bottom. I usually store some heavy items down there so it could use some more strength.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@Mojarra13 жыл бұрын
Love it, thanks for sharing your job and the planes 👍
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@koccocarrasco56963 жыл бұрын
Excelente trabajo 👍🏻👍🏻👍🏻
@madwilliamflint3 жыл бұрын
That's some gorgeous work.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@paulstanding72673 жыл бұрын
Another nice job well done the most simple design turns out the best 👍take care 👍👍😀
@dontrump52773 жыл бұрын
great work and joinery Cheers from Arizona!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@clausdr76873 жыл бұрын
Great video! I will try to rebuilt it soon! Thanks for the drawing too!
@j-woodworking95733 жыл бұрын
My pleasure. Thanks for watching sir.
@xisotopex Жыл бұрын
solid!
@sepulvedaapt3 жыл бұрын
Thank you this is good work
@alastairleung18833 жыл бұрын
My garage is very small. But I hope to build a smaller version of this to try wood working on. Thank you for making, and sharing this!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@boonphitphanthavong43343 жыл бұрын
I now have to redo my workbench after watching this video. That is simple beautiful workbench. Thankyou
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@keupondestroy911 Жыл бұрын
Merci beaucoup pour la vidéo
@viorsa82003 жыл бұрын
Excelente trabajo,todo a la milésima de m / m como siempre,un saludo cordial y por supuesto un gran like desde Narón, Galicia ( España)
@DvlDawg3 жыл бұрын
Very nice looking work bench, like the way you did the legs and shelving on there too.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@dessertman11813 жыл бұрын
Very well done I’m sure that will be helpful in your shop
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@FutureReverberations3 жыл бұрын
Nice job with tools available to most beginners too! Plunge saw being the only real stretch and that could be replaced with a circular or even hand saw.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@brucecook16533 жыл бұрын
Fantastic fitting.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@silvasos4053 Жыл бұрын
Bela bancada de trabalho. Vou fazer uma igual. Ótimo trabalho. Sou de Tremembé, São Paulo, Brasil.
@muhamadrifky23493 жыл бұрын
I,am amir from indonesia.......good job....mantul...👍👍👍👍👍👍👍
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@rd00543 жыл бұрын
Beautiful.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@rolandgdean3 жыл бұрын
Love the added safety note. Even better the second time around.
@j-woodworking95733 жыл бұрын
Thanks for your kind understanding. Take good care of yourself.
@lovesallweneed3 жыл бұрын
Good work man.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@HiTechDiver3 жыл бұрын
Sweet !
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@ty1on8313 жыл бұрын
Excellent.....
@luizribeiro44623 жыл бұрын
Parabéns, Congratulations my friends.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@Pmwgolf3 жыл бұрын
Nice clean easy sturdy bench. Again, Well done. Idea for next project, Shelving or bookcase You Are The Best
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@user-ud2sv2co2d3 жыл бұрын
안녕하세요 항상좋은영상잘보고갑니다 항상 좋은 영상 올려줘서 감사합니다 항상 감사합니다 고맙습니다 제가 너무 많이배우고갑니다 항상 감사한마음이에요 항상 응원합니다
@j-woodworking95733 жыл бұрын
자주 뵙네요 감사합니다
@user-ud2sv2co2d3 жыл бұрын
@@j-woodworking9573 님 제가 너무 감사합니다 고맙습니다
@hans-peterjordan93983 жыл бұрын
Great Show, 👍❤❤
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@aloisiomoura52103 жыл бұрын
Bom dia!! Ótimo trabalho. Como eu consigo as medidas das madeiras.
@dawitabate92913 жыл бұрын
Yes no more working on the table saw👍👍👍
@warmconservatism2530 Жыл бұрын
수고하십니다~👍
@antonioperez16243 жыл бұрын
Lumber quality in Korea is awesome. You can’t get that quality lumber in the US at any price.
@tomcat42853 жыл бұрын
Neither in australia...
@kingdarkem3 жыл бұрын
You can...if you do it yourself
@j-woodworking95733 жыл бұрын
Thanks for watching sirs.
@doitmervself3 жыл бұрын
My country, Indonesia, has a bunch of great quality lunmber, but it cost so expensive. Not worth for DIY project unless my DIY will making millions prices if I sell it
@denisduvoye42663 жыл бұрын
Hi J. Could you give us the plans? I would like to build exactly the same . Do you think 18mm would be enough to install a router and fences on the table? Thank you for sharing your creativity and knowledge.
@j-woodworking95733 жыл бұрын
The plans have been already opened in 'community section' of my channel. I think it's a good idea to mount router and fence on it. And there won't be problems with it. Thanks for watching sir.
@kstewart36573 жыл бұрын
J-woodworking목공일기 I would like to get the plans. How do I access your community channel?
@izzychen75373 жыл бұрын
@@kstewart3657 kzfaq.infoUgwZjZGC5ugqOi4-lER4AaABCQ (or you can just click on the channel and then on the 'community' tab, it's one of the topmost posts
@nicolasdejardin34123 жыл бұрын
Hello. Nice work, particularly for doing the legs : clever I wonder if making a chamfered around the desk is useful or not? Thanks from France
@j-woodworking95733 жыл бұрын
I don't think you need to champer the plywood tabletop and table bottom. But you would rather champer the regs. Thanks for watching sir.
@EP7DI3 жыл бұрын
awesome job looks like you have nice materials in your country
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@user-ru7kl3qh7l3 жыл бұрын
Неплохо надо взять на вооружение, а то я с этим дедов Ким методом соединения рамки на ус шип паз, вручную , тяжело немного, а здесь удобней
@easterlake3 жыл бұрын
Thanks
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@tfildaed3 жыл бұрын
Beautiful bench. I'm still concerned about, perhaps not you, but someone else jamming the work between the rip fence and miter slide...
@j-woodworking95733 жыл бұрын
Sorry about that. So I gave warning notice in the video. I'll be careful about it when I work and make videos. Thanks for your kind comment sir.
@sungmcho4583 жыл бұрын
미국에서 여러가지 보았는데 2x4 를 이용하여 다리 를 만드는 방법은 편리 할 뿐 아니라 튼튼 해서 좋습니다. This is the best method for handymen!
@j-woodworking95733 жыл бұрын
감사합니다
@sungmcho4583 жыл бұрын
@@j-woodworking9573 Impact Driver 의 출현으로 Glue 를 이용 하고 Chisel/plane 를 쓰는 시간 걸리는 접목 방법은 대부분 필요 없게 되였지요. 미국에서는 많은 사람들이 Handyman 으로 실용적인 방법을 바라지요. Table saw 를 이용 하지 않고 Circular saw 를 활용 하는 방법을 제시 하면 많은 시청자들이 볼것 같군요. 미국에서는 많은 집들이 circular saw 와 Impact Driver 를 가지고 있지요. Impact driver 는 Drill 대용으로 구멍을 뚫는 데도 이용 하고 힘이 좋아 Handymen 의 필수 연장이 되어 가고 있지요.
@j-woodworking95733 жыл бұрын
좋은 정보에 감사드립니다.
@DancingCobra3 жыл бұрын
Great bench and video! Do you have a downloadable plan for this workbench. Or measurements for the pieces.
@j-woodworking95733 жыл бұрын
kzfaq.infoUgwYOoPSRCb6CespW3t4AaABCQ You can find the measurement at the address above. Thanks for watching sir.
@stoffes3 жыл бұрын
love the intro music! is it a name on the sound?
@stoffes3 жыл бұрын
its geographer - Fine line if any1 looking for name :D ^^ gg man
@user-xi2ds7yb2f3 жыл бұрын
Все видео классные ! Но поменяйте уже музыку )
@nomark19783 жыл бұрын
안녕하세요 영상 잘 보고갑니다 혹시 미국에 사시나요? 장비들이 파워매틱 젯.. 미국스러워서 여쭤봅니다..
@j-woodworking95733 жыл бұрын
한국에 있습니다. 장비 구입이 그렇게 됐네요. 감사합니다.
@jeanlouisjacques30873 жыл бұрын
bonjour du mont st michel tres interressant
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@huseyinyuksel783 жыл бұрын
Scales ?
@user-jg3wj4ee1q3 жыл бұрын
3:45 이렇게 두껍게 잘라내니까 끌이랑 망치로 안파도 되고 더 깔끔하고 좋네요 철물점 가서 어떤 날 달라고 하면 이렇게 두껍게 파는거 살 수 있나요?? 이제 막 DIY 관심 가지고 배우는 상황이라 공구들 이름도 잘 모르는 초보입니다 ㅠ
@j-woodworking95733 жыл бұрын
tip2000.bizdaara.com/sell_view.html?no=602212&cid=tip2000&page=&search=&key= 이 싸이트에 들어가서 참고하면 됩니다. 감사합니다.
@user-jg3wj4ee1q3 жыл бұрын
@@j-woodworking9573 다도날이라고 부르는군요 ㅎㅎ 감사합니다!
@kiranbhandare44213 жыл бұрын
👌👌👌👌👌
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@ponwoodstar3 жыл бұрын
Hi, thanks for very nice and informativ videos! Can I ask what make the saw table you're using in your videos? Best wishes, Pontus
@j-woodworking95733 жыл бұрын
Powermatic. PM2000. Thanks for watching sir.
@AndreiIR0003 жыл бұрын
Hi J-woodworking! Excellent video as usual!! :) However, you don't need to apologize at 03:37 for using the fence and mitre gauge at the same time if the cut does not go all the way. The way you used it, can't make an offcut fly off towards the operator so all is good!
@AndreiIR0003 жыл бұрын
... also I love the music at the end of your videos! It really gives a "great energy" as you very well say in other videos.
@j-woodworking95733 жыл бұрын
Thanks for your kind comment sir. And l am happy to see you again.
@muoinon65183 жыл бұрын
👍
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@lancearmstrong32523 жыл бұрын
I would make the top sheet overhang the frame about 10 cm for a clamping ledge.
@j-woodworking95733 жыл бұрын
That would be a great idea. Thanks for watching sir.
@lancearmstrong32523 жыл бұрын
@@j-woodworking9573 Thanks
@mindya17993 жыл бұрын
Never thought I would use "elegant" when looking at a bench. But, damn. That was elegant.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@adukes73173 жыл бұрын
I have to agree with the previous review. That is an “Elegant Work Table”. You are definitely a skilled craftsman.
@totokbudiutomo97893 жыл бұрын
👍👍👍😄
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@user-in3yt5rq1i3 жыл бұрын
잘봤습니다. 상판크기가 어떻게 되나요?
@j-woodworking95733 жыл бұрын
90x180cm입니다. 감사합니다.
@user-zc4gl2ml4d3 жыл бұрын
3:36 이게 무슨 말씀이에요? 자막 이전에 작업인가요? 아니면 자막이후 나오는 작업을 말하는건가요? 그리고 왜그런지도 좀 알려주시면 감사할게요.
@j-woodworking95733 жыл бұрын
앞 뒤 다입니다. 립 펜스와 마이터 게이지를 동시에 사용하여 작업하는 중에 목재가 부드럽게 미끄러지지 않고 덜컥거리거나 약간 어긋나게 되면 톱날의 회전력의 의해 목재가 뒤로 튀어 부상당할 가능성이 높습니다. 반드시 명심하세요. 감사합니다.
@user-zc4gl2ml4d3 жыл бұрын
@@j-woodworking9573 글쿤여 감사합니다~ 조심해야겠어요.
@user-pj6li5mp9o3 жыл бұрын
Фанерный верстак?! Как это по китайски!)
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@huseyinyuksel783 жыл бұрын
width, height cm
@leesimon853 жыл бұрын
1:20 What is the size of the screw? How long? Thanks.
@j-woodworking95733 жыл бұрын
About 60mm long. Thanks for watching sir.
@rubenrodriguez6153 жыл бұрын
disculpe buenas noches podría poner las medidas de la madera
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@woodstory17713 жыл бұрын
Please share dimension your table saw🙏
@j-woodworking95733 жыл бұрын
You can see that in 'community' of my channel. I uploaded it. Thanks for watching sir.
@wernerpfeifer3 жыл бұрын
Why didn't you glue?
@AndreiIR0003 жыл бұрын
I was wondering the same but my best guess is that the only reason that I can think of is that it might be easily detached / unmount at a later time.
@alunmorgan78693 жыл бұрын
Demountable , take it anywhere
@j-woodworking95733 жыл бұрын
Thanks for great explanation. Gluing is much better in this case. I didn't glue for special purpose in the future.
@suby043 жыл бұрын
나무재질이 뭔가요?
@j-woodworking95733 жыл бұрын
일반 2x4, 2x6 공사목입니다. 감사합니다.
@zizai823 жыл бұрын
这摇不了几天就松了吧。
@tomcat42853 жыл бұрын
螺丝应该挺紧的
@mattbuzz3 жыл бұрын
The plans that you leave in the descripción of the vídeo, I cannot Download them, is there another possibility to obtain the plans? Thabk you.
@j-woodworking95733 жыл бұрын
kzfaq.info/love/JYJgssnvQET5PWLQzTlq8wcommunity?lb=UgwYOoPSRCb6CespW3t4AaABCQ You can meet the plan above Thanks for watching sir.
@mattbuzz3 жыл бұрын
@@j-woodworking9573 Thanks!
@wooju77883 жыл бұрын
선생님 가로,세로,높이가 궁굼 합니다 싸이즈를 악고 싶어요
@j-woodworking95733 жыл бұрын
제 채널의 '커뮤니티'란에 들어가면 공개한 도면을 참고할 수 있습니다. 감사합니다.
@danieldorgan40773 жыл бұрын
✔
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@huseyinyuksel783 жыл бұрын
can i take the measurements
@j-woodworking95733 жыл бұрын
I'll post the measurements tomorrow. Thanks for watching sir.
@huseyinyuksel783 жыл бұрын
Thank you
@Art.V.733 жыл бұрын
@@huseyinyuksel78 It's probably no because it definitely hasn't been posted it's been a week, give or take a few days J-woodworking.
@Art.V.733 жыл бұрын
@@j-woodworking9573 It's probably no because it definitely hasn't been posted it's been a week, give or take a few days. J-woodworking.
@j-woodworking95733 жыл бұрын
I have posted it in 'community' of my channel. Please search it there.