Making a Tap Wrench || INHERITANCE MACHINING

Рет қаралды 706,285

Күн бұрын

Join me in the machine shop where we’ll make a tap wrench. I want it to be really nice, so rather than reinvent the wheel, I’ll be mimicking a Starrett 91C. We will be using the engine lathe and the vertical milling machine for most of this DIY tool project and making use of materials I already have. Which is mostly mystery steel. But the body material just so happened to be marked as O1 tool steel. The design isn’t exactly manufacturing friendly and will require some creative ways to make many of the features. We’ll be getting into knurling, taper turning between centers, hand filing square holes, and radius turning without a radius turner, just to name a few. With so many operations, let’s just hope I get through this without any machining fails *cough cough*
#inheritancemachining #machineshop #hobbymachininst
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
TIMESTAMPS
0:00 Intro
1:36 The Handle
5:00 Finishing the Handle
5:54 The Body (Lathe Operations)
8:04 The Body (Mill Operations)
12:55 The Body (More Lathe Operations)
15:03 The Plunger and Pin
18:03 The Pin and Final Assembly
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Making a Tap Wrench ||...
© 2022 Inheritance Machining, LLC. All Rights Reserved.

Пікірлер: 826

@InheritanceMachining 2 жыл бұрын

Thanks again for watching! As always we'll have another fun project for you in 2 weeks, Friday April 29th at 10am EST. See you then!

@BruceNitroxpro 2 жыл бұрын

Why not buy a proper wrench such as the Starrett one?

@InheritanceMachining 2 жыл бұрын

@@BruceNitroxpro A combination of reasons actually. The Starrett's are pretty pricy for the simple tool that they are. But I also liked the challenge of figuring out how to make one. Plus the feeling of having made a very nice tool is pretty great

@BruceNitroxpro 2 жыл бұрын

@@InheritanceMachining , Gotcha. I hear that you think less is more... cheap that is.

@r.ccustomtruckingsydneyaus4632 Жыл бұрын

how can i buy some of the hand tools you make . . you have a great skill set

@jimmyswollnuts7662 Жыл бұрын

You know they sell these at the store

@barrishautomotive Жыл бұрын

It's so cool that you got to spend that time with your grandfather and to learn these skills. My grandfather was a machinist, but he passed away when I was 6 years old. So I never got a chance to spend that kind of time with him. I still caught the home shop machining bug though, and I've built my own shop in part as a tribute to him.

@InheritanceMachining Жыл бұрын

That's unfortunate but great you found your own way. Sometimes I feel like I'm picking up where my grandfather and I left off.

@budgetbuilds5722 Жыл бұрын

@@InheritanceMachiningmy grandfather was also a tool and die maker at the steel mill. I inherited what was left of his machine tooling. Just recently bought a 144” long 20” swing Lodge and Shipley lathe. Wish he was here to see that monster run. I have never gone back to his grave to visit. Every time I need to chat I light a fire in the wood burner and sling some chips. It will never bring them back but it feels damn good to keep their tools alive. Your story hits home with me and so many others. In a world full of computers and button pushers it’s refreshing to see a master manual machinist at work. Thanks for the content

@andrewbeaver1843 Жыл бұрын

Three men in my family were machinist at one point in their lives, but two were gone before I came about. The third, my uncle was no longer a machinists, by the time I came around. We almost bought a lathe though, but we didn't have the capabilities to move it around in his garage, the electrics to wire it up. However, a friend of mine that I work for may be looking at getting a Bridgeport mill.

@Copilot40oz 2 жыл бұрын

My new favorite machining channel, great editing, great lighting and the best narration. Thanks so much for these videos!

@claudiolorini3311 2 жыл бұрын

still undecided between 'this old tony' and IM, both are so pleasant to watch!

@InheritanceMachining 2 жыл бұрын

Wow, thank you so much! We're really trying our best. Thanks for the support!

@InheritanceMachining 2 жыл бұрын

@@claudiolorini3311 Don't worry. I wont make you choose... just being compared to ToT means so much!

@jamessmith6297 Жыл бұрын

@@claudiolorini3311 Stuff Made Here is another great channel.

@Dangerously2014 11 ай бұрын

couldnt have said it any better

@jimmydiresta 2 жыл бұрын

beautiful!!!

@InheritanceMachining 2 жыл бұрын

Thanks, Jimmy!

@thecomputergeek101 5 ай бұрын

Your opinion really does count. I have seen the things you have made!

@warrenpage6583 Жыл бұрын

I have been a machinist since my UK apprenticeship in 1973 and made a tap wrench plus all the other tools you are making, I now manage Xtrac Transmission's apprentice academy and our apprentices make the very same tools. I managed to acquire the original 1960's drawings published by the EITB, Engineering Industry Training Board. Love your videos and workshop carrying on the creative skill.

@Crxssbxw Жыл бұрын

its rare these days I find a channel that peaks my interest to the level where I can just sit and watch it like a show, not sure whether its cause of the engineering interest I have or the fantastic cinematography or even maybe a mixture of the two, but thank you for putting the time in and making such a masterpiece but also carrying on the traditions your grandfather taught you.

@InheritanceMachining Жыл бұрын

Thank you very much. I really appreciate that

@nutsandbolts432 2 жыл бұрын

Looks great, excellent editing too. It might be overkill, but would heat treating be needed to prevent a stubborn tap from distorting the plunger or handle? Might mess with the tolerances you have machined, and would need to be polished again, but it would be a tap wrench your great grandchildren can use.

@nickhenscheid369 2 жыл бұрын

Was wondering the same thing - what kind of steel did you use? Obviously doesn't need to be cutting tool hard, but a little harder than mild would probably improve durability

@erikkayV 2 жыл бұрын

I would go so far as to say that it is required for at least the anvil.

@InheritanceMachining 2 жыл бұрын

Thanks! I considered that but just didn't get the time to do it. I'm pretty sure the material for the plunger was just a cold rolled mild steel so could use the help. I definitely hope this is something that get's passed down for generations

@gerlagerweij 2 жыл бұрын

Thought the same, I've made a tap-wrench closer to the "This Old Tony" design. Did heat treat that one.

@steveclark.. 2 жыл бұрын

@@MF175mp I've experienced the same too, that's how they can sell those Chinese ones so cheaply I guess, no heat treating process.

@cricketthebeardie325 2 жыл бұрын

Your videos are on this old tony and clickspring's level. Amazing work

@InheritanceMachining 2 жыл бұрын

I take that as the highest compliment! Thank you so much!!

@qutlicopatlixhotutti6552 10 ай бұрын

As a mechatronics technician in Germany we had to build a diesel locomotive as first project. This included filing u-steel to dimension and making all the faces parrallel/quare to each other. After weeks of filing the whole day, making the first cuts on the lathe to turn the wheels really was a blessing.

@davidmoffitt981 Жыл бұрын

It's kinda crazy that there wasn't one in his shop, but you did a wonderful job creating something that your grandfather would likely have been quite proud of. Thank you for sharing the journey with us - including the little oopsie moments and the triumphant bits (that pin fit, wowww).

@InternetNightmare 2 жыл бұрын

I think we are seeing another great machining channel being born! Awesome video, awesome project. Keep up the good work!

@InheritanceMachining 2 жыл бұрын

Thank you so much!

@ADBBuild 2 жыл бұрын

Nice job, turned out great! I recently bought a random assortment of old files from an auction for $35 and got lucky as there was one of these Starrett tap wrenches in like-new condition in the box with the files!

@InheritanceMachining 2 жыл бұрын

That is definitely a score! Even used ones on ebay sell for the price of new ones ~$150. Thanks for watching!

@jeremyb.1977 Жыл бұрын

Nicely done! When I saw the lathe that you have, I was excited to see that the one we have at work was not the only one in the world. We have the same model and I really like it.

@InheritanceMachining Жыл бұрын

Thanks and that's awesome! If you guys need any of the manuals just let me know. I have PDF's of them

@dreadnought1984 Жыл бұрын

From one inheritance machinist to another, something my dad taught me: Turn a dead center on the lathe that will fit an R8 collet. Use the dead center on the back (top) of the tap for alignment in the Bridgeport. Keep some pressure on the quill to maintain tap alignment as it threads. Love the channel, looking forward to watching the rest of your content.

@InheritanceMachining Жыл бұрын

Oh that's pretty clever. Thanks for the tip!

@SloppyMechanics Жыл бұрын

really impressive product there at the end

@WIPEYOURLENZ Жыл бұрын

I have never seen a DTI with 4 decimal places before 👍🏻

@briansavage932 Жыл бұрын

This channel is the most comforting and somehow heart-warming thing I've ever subscribed to on KZfaq. My grandpa had a wood shop in a shed in his back yard. He loved to whittle and turn things. It always smelled cedar in there. He was a wise and comforting man and I miss him every day. I have many of his old tools now I treasure them. The way you're honoring your grandfather with these projects makes me feel happy. Thanks, man.

@InheritanceMachining Жыл бұрын

I really appreciated that. And I'm glad you got opportunities and had an interest in some of your grandfathers passions. It's often those that they know the most about and you can learn so much from. PS your nostalgic smells of cedar are equivalent to my nostalgic smells of hot metal and cutting oil.

@danmeyo 2 жыл бұрын

Using tools to make tools, just the way I like it. Just like buying a 3D printer, having it go 24/7 for few weeks printing printer improvement mods. Once finished idle for months. Aw yes

@InheritanceMachining 2 жыл бұрын

This is the way. In your case I refer to it as self replicating robots

@unclewes8850 2 жыл бұрын

LS starret would be proud.

@InheritanceMachining 2 жыл бұрын

Thank you!

@Imsquidy 2 жыл бұрын

I’m really enjoying your channel so far. Thank you for all the work you are putting into these.

@InheritanceMachining 2 жыл бұрын

Glad you like them! Thanks for the support!

@joell439 2 жыл бұрын

Stunning. Grandpa IS so proud of you. 👍👍😎👍👍

@InheritanceMachining 2 жыл бұрын

Thank you!!

@charlvanniekerk8009 2 жыл бұрын

Its always a pleasure to watch a well taught and intuitive individual work. Thank you for sharing the beautiful story that is your grandfathers workshop and now yours, I cant wait to see what you make next and will try to keep my envy separate as I gawk over your machines. Thanks again!

@InheritanceMachining 2 жыл бұрын

Haha! Thank you very much!

@soundabuse Жыл бұрын

One of the most entertaining machining channels here on YT. Great job!

@InheritanceMachining Жыл бұрын

Much appreciated!

@dermozart80 2 жыл бұрын

The quality of your build and your video never ceases to amaze me!

@InheritanceMachining 2 жыл бұрын

Thank you!

@nejclipar 3 ай бұрын

am i the only one that realy likes these restoration videos? it might be becouse i realy enjoy restoring myself😅. please do a video of restoring a batch of stuff. 😁

@SchysCraftCo. 2 жыл бұрын

That tap rench turned out very well. Hopefully you get great use out of it my friend. For many years to come. Can't wait to see more videos soon. And more side projects. Keep up the great craftsmanship and hard work. Keep making. God bless.

@RichardMerrill3Hawk Жыл бұрын

I don't have a milling machine or a lathe, nor will I get them. I just like to watch you work and listen to your director's commentary. It's calming for some reason. Thanks, Brandon!

@InheritanceMachining Жыл бұрын

My pleasure. And thank you!

@robbvk6es Жыл бұрын

I agree the Starret tap wrenches are dead sexy. I made a complete set but changed one feature that is common on most tap wrenches. The knurled handle. when you need to produce a large number of holes the knurling is like a file on the hands. So I leave the ends smooth with just a band at the inboard end for grip when tightening the wrench.

@robertpearson8798 Жыл бұрын

I have two of the smaller Starretts and I’m finding the same thing. I need to keep my index finger on the smooth end when winding out a tap or it gets a little bit irritating.

@MachiningandMicrowaves 2 жыл бұрын

That was a lovely way to spend 19 minutes and 42 seconds! Thanks very much.

@InheritanceMachining 2 жыл бұрын

thanks for watching!

@brianwood5220 10 ай бұрын

You couldn't have bought better. Thanks for sharing.

@clickykbd Жыл бұрын

IT'S LITERALLY ALL SPRINGS! you got me with that one.

@robinadair8631 Жыл бұрын

“Eyecrometer” Just love it! Can’t believe I’d never heard that jem.

@mannycalavera121 2 жыл бұрын

You videos have quickly become one of my favourite 'chill' videos, love the editing and overall vibe.

@InheritanceMachining 2 жыл бұрын

Ah, great! I appreciate that

@todayintheshopbanksy5904 Жыл бұрын

Love that you use your Grandads workshop

@copescale9599 Жыл бұрын

Order of operation and efficient method needs to be practiced in every part of life.

@shadvan9494 9 ай бұрын

I bought a set of the gear wrench taps and thought i had found the best tap wrench ever... then i saw the work of art that you just created. that thing is incredible.

@emanruoy Жыл бұрын

Totally appreciated the comment about making a set of 1-2-3 blocks with a file, I was told that as well but never had to actually do it. I'm fascinated by machining but am an artist at heart, there is no symmetry or exacting precision in the features of a face, and yet... Love your videos. Thanks

@James-gk8ip Жыл бұрын

I've also heard that watchmakers' schools used to have you file a block of scrap into a perfect sphere.

@BurtonsAttic 2 жыл бұрын

Extra fancy, nice! Making a 1-2-3 block with only a files sounds like a lot of fun...

@InheritanceMachining 2 жыл бұрын

Thanks! Is that sarcasm I detect?

@flashgordon6238 2 жыл бұрын

The Tool and Die Maker I apprenticed with said he had to make a perfect solid sphere with only hand files when he apprenticed in Germany.

@InheritanceMachining 2 жыл бұрын

@@flashgordon6238 Now that seems like a real challenge

@BurtonsAttic 2 жыл бұрын

@@flashgordon6238 Like to see the fixture for that!

@nicholasmcneely245 2 жыл бұрын

Best channel I've discovered in 2022!

@InheritanceMachining 2 жыл бұрын

🙏 thank you!

@keithlincoln1309 Жыл бұрын

I can watch this channel all day!

@InheritanceMachining Жыл бұрын

😁 Thank you!

@bobfugazy4916 Жыл бұрын

Nice work and a new word for my vocabulary: eyechrometer. Thank you.

@weepz 2 жыл бұрын

That does look beautiful, love seeing all the planning, trial and error that goes into this.

@InheritanceMachining 2 жыл бұрын

I appreciate that. It's definitely a bit of an adventure going through it the first time

@gerryoneill8881 5 ай бұрын

For someone who claims to have very little machining experience you appear to have a lot of machining experience and good use of how to use tooling and so on to a high enough level. I only recently discovered your channel and it is very good.

@WillyWonkenobi Жыл бұрын

Dude don't apologize for using a tap for that hole, I do this all day and you saved yourself a huge pain in tail, love the videos

@KorianHUN 5 ай бұрын

I love these videos, a bit odd but makes complete sense how many of these operations and design considerations also work for firearm design. The precise fit and aligned notch for the pin are pretty much the same as you see in firing pins for striker fired designs. Of course this is because machining is machining, same tools and machines just a different purpose.

@1911wood 2 жыл бұрын

Very nice. Some other machinists have mentioned making your mark on the tools you make in some way. Someday your tools are likely to be passed on as you’re very well aware. I know Tim Lipton likes acquiring and sharing useful tools. He has appreciation for and shows their mark in the presentation. I hope you agree this project and your collet blocks are worthy of your mark, I think they are. Hey that might be a video in itself, if you do it in an interesting way. I like tool shopping at garage sales. Recently a family was selling off their deceased fathers tools. Two of the siblings were ok with the sale but one sister was a little disturbed. As I was loading a small drill press he had mounted to a homemade table. She was closely watching, I asked her what her fathers name was. She looked suspiciously at me and I explained most of the tools I buy have the owners name on them and how those tools have more meaning to me. She told me his name and watched as I fetched his paint pen and wrote his name on it. She seemed quite pleased with that. I wonder if she took the pen to his other tools after I left.

@InheritanceMachining 2 жыл бұрын

That's really great. I know how it is not being able to hang onto everything from passed loved ones and having to let things go. That one gesture probably made all the difference for her. I'll keep this story in mind if I ever find myself in a similar position. I'll definitely be naming my parts and dating them too.

@jonturn7 Жыл бұрын

Wow. Your videos and works are just phenomenal. Thank you for putting so much effort into creating these. They're a pleasure to watch.

@InheritanceMachining Жыл бұрын

The pleasure is mine! Thank you!

@Horus9339 Жыл бұрын

I couldn't have helped myself but black the knurled handle. I know, please do not shout at me. Beautifully made Sir.

@drheaddamage 4 ай бұрын

Someone gave me a massive tap wrench, when put together it's more than half a meter in length, and I was thinking of donating it... now that I see this video, I think I'll hold on to it a little longer. You never know when you need one!

@BruceBoschek 2 жыл бұрын

Tool making is the epitome of machining and you are proving your ability. The proof is in the pudding, and that pudding is gorgeous. Thanks for the excellent videography, editing and narration. Your channel is going to grow in leaps and bounds.

@InheritanceMachining 2 жыл бұрын

Bruce, thank you as always! I'm slowly picking up on the nuances of precision machining

@Gwlyddyn 2 жыл бұрын

This is quickly getting to be my absolutely machining channel on KZfaq. Lovely done!

@InheritanceMachining 2 жыл бұрын

Awesome! Thank you so much!

@reaper060670 11 ай бұрын

I've seen these Tap wrenches being used all the time by ppl . I've asked a few times but now I know it's a Starrett? They are something else my friend. I bought a nice TAP WRENCH a couple of weeks ago and it's a beauty but this u made leaves it in the halfpenny place or as we used to vsay when Halfpenny's were all the rage in IRELAND back in the 1970's, "The Haypenny place" meaning the cheapo section in the big box stores.. LMAO That is a peach of a wrench man. Well done. G Ur grandad would be well proud of ur work.

@OldIronMachineWorks Жыл бұрын

Branden, was channel surfing KZfaq and stumbled across your channel. Been enjoying it very much. Very enjoyable to watch. I’m sure your channel is going to continue to do very well. And I think it’s super cool that you were able to acquire your grandfathers tools. Keep up the great work. Gary

@InheritanceMachining Жыл бұрын

Thanks so much! Welcome!

@sambow4u 2 жыл бұрын

I Hope & Pray ,,, That watchers/subscribers realize the Value that you Grandfather left for you . I'm sure you do since your a engineer , But Man ,,, What a treasure ! My Grandfather was a Battleship & Boiler maker prior to and during World War II . He was stationed in Washington state & Newport Virginia & when the need was over settle back in the Appalachian Mountains of North Carolina ! Between My Father and Grandfather I was learning the concepts and could read a 32nd tape measure in about the 3rd grade of school ! Graduating from High school , and hard work instilled in my soul , I immediately went to work in High rise steel , after 17 years , I finally fell off a silo and after many surgeries and a year and a half of recovery , I settled in a local machine shop & eventually was into Tool & Dye making ! I've buried my Grandfather & Father & Brother with rings & Pens in their shirts , I had made for them outta Beryllium Copper & Brass that shined like Gold for their funerals . There's nothing like the smell of a Carpenters shop or Machine shop with all the Oak & Maple & cutting oils of the shops ! You'll never have to worry about a job or earning a living in that small shop ! Keep it clean and running smooth and your grandfathers legacy will serve you , your life time and your kids ! What a treasure ! And yes I'm Subscribed and watch all the vids !

@InheritanceMachining 2 жыл бұрын

Wow! Thanks for sharing! I definitely cherish what I have inherited and also know their true value. I also love the smell of a machine shop! Thanks for the support!

@middleway1885 Жыл бұрын

Boop... living life with all the ups and downs, and being blissed for being able to experience unique states...

@user-bf9nv7ld7q 11 ай бұрын

I have zero experience in machining but your videos are awesome.

@isaacandpatigreene8625 2 жыл бұрын

Like butter! Smooth wrench... and great work sequencing!

@InheritanceMachining 2 жыл бұрын

Thank you very much!

@jimclester4754 Жыл бұрын

Jim 922 from Arkansas, I enjoyed watching this project. A demonstration of good skill and machine work.

@InheritanceMachining Жыл бұрын

Much appreciated!

@Dan-K Жыл бұрын

I'll admit I'm jealous of something most people won't understand: you show all the parts (minus time...) of making something, including the inconveniences. In my video work, I basically cut from beginning to end of machining stuff, which is where all the fun occurs. Subscribed!

@alanpecherer5705 10 ай бұрын

I really learn a lot from your OCD. I'm just a drill-press/grinder "machinist" (no lathe, no mill) and ordinarily I'm fairly content to leave finishing marks and overshoot marks on most things, so your attention to detail is both entertaining and instructive.

@eformance Жыл бұрын

All of this Enco stuff you have takes me back. When I started out building my shop I bought a mill and lathe setup that came out of a home shop. The guy bought all of his equipment and tooling from Enco. My lathe is some early-mid 80's Enco 1540 that is actually a 1740.

@straight-san2226 Жыл бұрын

Never thought I will hearing this and never get boring for some reason even do it's all technicality stuff but also interesting this will be my new favourite channel to go to when boring or want to see something amazing and awesome craftsmanship

@InheritanceMachining Жыл бұрын

I appreciate that

@ddistrbd1 2 жыл бұрын

Great video, I thought I'd watch 5minutes of it and get bored but the way it was edited and presented I couldn't keep my eyes off the screen, you have a well-stocked machine shop, and you also have tons of knowledge and experience , I hope to see more of your videos.

@InheritanceMachining 2 жыл бұрын

Hey that's awesome! Thanks for giving it a watch. Definitely more to come!

@SargTeaPot 7 ай бұрын

Found this channel a few weeks ago and have been binge watching it. Absolutely love it! Especially the side projects hahaha

@Carnold_YT 2 жыл бұрын

That is a beautiful wrench, I really enjoyed this video. Great craftsmanship en beautiful editing!

@InheritanceMachining 2 жыл бұрын

Thanks for watching!

@bruceeickholdt9293 25 күн бұрын

I love watching your videos .

@revtmyers1 2 жыл бұрын

I love your channel. I can appreciate the treasures that you have received and respect the cost involved in your inheritance. Though I have no shop such as yours, I treasure some hand tools from my grandfather who was a master craftsman in working with wood. My father passed away last year and left me some tooling from his lifelong career as a machinist doing tool and die work. Much of what I have is far from perfect but worth more than gold to me. Looking forward to what you have in store to share with us in the future.

@InheritanceMachining 2 жыл бұрын

That’s awesome. I completely relate. I couldn’t bear the thought of any of this shop being sold off. It has mare value to me because it was his. Thanks for following along

@jimurrata6785 2 жыл бұрын

Brandon, you've created a really beautiful addition to your shop. 🙂 Something you can take joy in using on many other projects in the decades to come. Your grandfather would be very proud and pleased that his machines are making tools while you learn and gain the experience he shared with you as a kid. Thank you for sharing through your channel! It's inspiring.

@InheritanceMachining 2 жыл бұрын

Thank you so much, Jim!

@fredrossman1189 2 жыл бұрын

I'm not a machinest ,,,, Just a Jeweler,, but I sure enjoyed watching you mess up and recover. Good job.

@InheritanceMachining 2 жыл бұрын

Lol thanks! Biggest perk of being the designer is you can modify the design :D

@normmcrae1140 5 ай бұрын

When I joined the RCAF as an Airframe Technician - we had to make a project pen-holder (it was graded for accuracy)... the actual holders (2 of them) for the pens were to be Hexagonal pieces about 2" long. We had to hand-file both from a piece of aluminum ROUND stock about 5" long, and had a tolerance of .001" in all dimensions. Luckily, I'd had experience working with metal, so I got a pretty decent grade.

@stevestruthers6180 Жыл бұрын

One of my paternal great uncles was a machinist who worked in a petrochemical plant. I didn't learn that until a few years ago. Your video gives me a sense of the things he might have had to do while on the job.

@InheritanceMachining Жыл бұрын

For sure he used a lot of what I show here, and a whole heap more. Thanks for watching

@aaronbuttitchy444 Жыл бұрын

New to the channel… love it. Best bit is the narration and showing your stuff ups… especially the spring loss…

@InheritanceMachining Жыл бұрын

😁 Welcome!

@ccbproductsmulti-bendaustr3200 10 ай бұрын

Great watch, great channel , a pleasure to watch , working my way thru 👍👌 Cheers Chris

@Weasel8904 9 ай бұрын

Absolutely awesome work 👏

@metalgeria Жыл бұрын

It's a pleasure to watch your videos, Thank you very much for sharing.

@InheritanceMachining Жыл бұрын

The pleasure is mine! Thank you

@davidelliott8324 10 ай бұрын

I have binged all of your videos since I found you a few days ago. Hope all the👍 help. Thanks for making me actually laugh out loud at the spring and the pin leaping for the shelter of the mill shavings.

@alandohse1977 Жыл бұрын

Your tap wrench is awesome! So clean.

@aguycalledlucas 2 жыл бұрын

Beautiful work!! And the shop is looking great.

@InheritanceMachining 2 жыл бұрын

Thanks! Yeah we're slowly getting there

@brycejeannotte7699 2 жыл бұрын

That wrench is beautiful! Great job.

@InheritanceMachining 2 жыл бұрын

Thank you!!

@Tuxedo2680 3 ай бұрын

Beautiful work!

@FaisalMughal58123 7 ай бұрын

U r brilliant macanical worker. And good video editor. Sound choice very good.

@hinkleaj1 11 ай бұрын

Really beautiful work!

@tomasn3 10 ай бұрын

Just recently found your channel and I’m glad I have. I’m not a machinist but enjoy watching machining videos and I just wanted to say I like them! Thanks 🙏🏻

@InheritanceMachining 10 ай бұрын

Thanks, Tomas! I appreciate the support!

@who32isit 2 жыл бұрын

I’ve been hanging out for this video. Keep killing it mate, love your work. 👍👌🔥

@InheritanceMachining 2 жыл бұрын

Thank you so much!

@jg_guitar9025 Жыл бұрын

I'm sure your grand-pop would be proud. Amazing channel!

@InheritanceMachining Жыл бұрын

Thank you 🙏

@matthewpond316 Жыл бұрын

I'd love to see that H&H 5C collet indexer restored. The "bigger beefier" indexer!

@N1RKW 2 ай бұрын

Wow! Nicely done!

@3in1Machining 9 ай бұрын

Good project, thanks for sharing

@thecomputergeek101 5 ай бұрын

This looks really good

@mauserkk98 2 жыл бұрын

Most enjoyable, a quality out come.

@InheritanceMachining 2 жыл бұрын

Thank you!

@TheDangerros 2 жыл бұрын

dude your videos are therapeutic for meeee

@InheritanceMachining 2 жыл бұрын

Glad you like them!

@duffshot81 Жыл бұрын

I am really loving your channel! Thank you.

@InheritanceMachining Жыл бұрын

My pleasure!

@Dave.Wilson 2 жыл бұрын

That wrench looks so cool, I bought my last one, but seeing you do this, well I'm just going to have to make the next one.

@InheritanceMachining 2 жыл бұрын

It's a great project and not all that crazy. The feeling of making it yourself is hard to beat!

@Robpearceknives 2 жыл бұрын

Well done! I’m not a machinist, but can’t help but watch every tool machining video I stumble on. Subscribed and look forward to going through your videos from the beginning.

@InheritanceMachining 2 жыл бұрын

Much appreciated! Welcome!

@cameronclarke4062 2 жыл бұрын

Can't wait to see a video on the drafting table. Great channel, love your videos!

@InheritanceMachining 2 жыл бұрын

I might have to slip one in there. It needs some improvements. Thanks!

@raymondclark1458 2 жыл бұрын

Amazing cinematography and editing. Awesome shop and project too. 👍🏻

@InheritanceMachining 2 жыл бұрын

Much appreciated!

@byOldHand 2 жыл бұрын

I loved ⭐️ Gorgeous machinig skills and beautiful edit 👍🏻 Thank you, l had great time while watching.

@InheritanceMachining 2 жыл бұрын

Much appreciated!

@poopfartlord9695 Жыл бұрын

This is such good content. Actually insane for how new your channel is. Too notch in terms of production value, content, and commentary. Seeing machining videos like this makes me feel like picking up one of the lathes or mills I always see on auction for my shed. But as an Electronic Engineer I might stay in my lane for now.

@InheritanceMachining Жыл бұрын

I really appreciate that, man. If you got into this hobby I have no doubt you would enjoy it