Restoring an Angle Plate || INHERITANCE MACHINING
Рет қаралды 426,068
Күн бұрынWelcome back to the machine shop! This video I’ll be doing a little tool restoration and bringing life back to this rusty old cast iron tool makers angle plate. Of course this will be much much more than just a rust removal job. This is a precision tool so I need it to be perfectly square as well. We’ll spend a lot of time at the surface plate with the surface gauge and you can count on a ton of precision surface grinding plus some action on the vertical milling machine. Including slot milling, chamfering, and some attempts at fly cutting with a boring head. Along the way I find myself roped into a couple side projects making and repairing some other tooling fixtures to get me there. In the end I take the angle plate for a spin to finally finish off the sine plate build.
#inheritancemachining #machineshop #hobbymachininst
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
And a special thanks to my "Micrometer" level patrons!
Lachlan L., Jim A., Benjamin D., Grant F., Brendan W., Caleb T., Stephen Maus., Samuel G., Ralph M., Brenton, Ethan B., Chris W., Esti-Mari D., Matthew K., Terence K., Charles P., Michael T., Ben M., Jim H.
TIMESTAMPS
0:00 Intro
1:01 Cleaning
2:27 A Taste of Milling
3:14 A Quick SIDE PROJECT!!
6:19 Back On Task...
7:29 Re-slotting the Slots
8:40 Grinding!
9:54 Face 2
11:10 Final Touches
11:52 The Purpose
12:32 An Actual Quick Side Project
13:04 Indicating and Grinding
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Restoring an Angle Pla...
© 2022 Inheritance Machining, LLC. All Rights Reserved.
@InheritanceMachining Жыл бұрын
Thanks for watching everyone! Be sure to tune in in 2 weeks or turn on the notification bell for the next upload on Friday August 19th!
@toddsmash Жыл бұрын
for Todd's sake can we please have a bloody video of just side projects!!!! In all seriousness...the side projects are a big part of the reason i like watching your videos.
@InheritanceMachining Жыл бұрын
@@toddsmash Did you catch my mill upgrade video? Exclusively side projects. 21 to be exact! And I'll probably be doing more of these
@The.Talent Жыл бұрын
@@InheritanceMachining So it’s quite clear that the problem with all of this equipment that you’ve inherited is rust and corrosion over an extended time. Is there a good method for storing all of these items that doesn’t involve frequent re-application of rust inhibiting oil and wrapping in wax paper? Or is that the standard? I guess you could also blue the parts but that comes with it’s own challenges and also isn’t perfect long term. I’m not a machinist. Like you, I’m a mechanical engineer, but I do love this stuff!
@InheritanceMachining Жыл бұрын
@@The.Talent I can’t really speak from experience here. But I can say that my shop has a dehumidifier running non stop where the shop these came from had poor climate control and also was abandoned without and climate control for 2 years. My hope is that frequent use, oil, and a dry shop will cover me
@toddsmash Жыл бұрын
@@InheritanceMachining I did. The work you did on it was awesome! I was telling my missus about your shop and ideas I had for mine. I'm just being a bit selfish. When I see that counter pop up on screen it makes laugh. Gonna be a good content!
@colinfurze Жыл бұрын
id just be really pleased with those clamp slot things you made to hold the sine plate with haha
@InheritanceMachining Жыл бұрын
😂 Thanks, Colin!
@Philyshark7 11 ай бұрын
13 mil subs and only 1 reply
@thomaskletzl6493 10 ай бұрын
@@Philyshark7now its 2
@thomaskletzl6493 10 ай бұрын
@@Philyshark7wait 4
@shaneod6664 9 ай бұрын
A fabricator that appreciates machinists? Welcome friend!
@christiandynes9451 Жыл бұрын
I could watch your videos for hours. You are quickly becoming one of my favorite channels
@InheritanceMachining Жыл бұрын
Glad to hear that! Thank you!
@samjohnson7325 Жыл бұрын
I’ll second that
@toddsmash Жыл бұрын
@@samjohnson7325 I third it. If that's a thing. if its not it is now.
@THusbands Жыл бұрын
Definately
@argee55 Жыл бұрын
I totally agree. Guess that makes me fourth. Randall in Winchester, Kentucky.
@simonhoey6575 Жыл бұрын
Brandon, I must say. The speed at which your channel has taken off is astounding. Most people spend multiple years building a channel to your level of popularity. This only shines a light on how you came out of the gates with excellent quality. Keep up the great work!
@InheritanceMachining Жыл бұрын
Thank you so much! I'm definitely surprised as well at how well the channel is growing. I have to give a lot of credit to my wife though. She has been on KZfaq for years now and helped me a ton. And still does! Thanks again!
@simonhoey6575 Жыл бұрын
@@InheritanceMachining That's great that you've had an experienced mentor. Thank her for us!
@InheritanceMachining Жыл бұрын
@@simonhoey6575 Will do!
@kurtfrancis4621 Жыл бұрын
@@InheritanceMachining A fellow engineer as a wife and experienced YTer? And she helps you set up move and set up shop on top of that? She is exalted among women!
@InheritanceMachining Жыл бұрын
@@kurtfrancis4621 She is indeed!
@FlaminChicken231 Жыл бұрын
it always amazes me to think, that under all of those years of rusting, just a few thou under the surface lays a perfectly good tool fit to be used for future generations. I'm a woodworker, not a machinist, but to an extent, the same holds true for wood. I've used old barn wood that had probably been sitting in the same place for over 50 years, and after the first layer of dirt and age had been removed, you'd never be able to tell just how mangy a piece really was before you put your hands on it. every time I'm down in my woodshop, I get to uncover the beauty of the wood underneath so many imperfections, and its truly the reason i keep doing what i do. watching videos like this only reinforces that idea in me.
@Sam_596 Жыл бұрын
"Have you ever started a project knowing exactly what you want the end product to be but no clue how you'll get there?" (paraphrased) I am a programmer. You just described a solid two thirds of all personal projects I've undertaken.
@judelarkin2883 3 ай бұрын
Have you ever noticed how much time hobby machinists spend making tools to do machining? It’s an awesome project and I’m green with envy of the shop. I just think it’s a funny observation that some machinists only seem to do machine tool projects.
@CorbinMusso88 Жыл бұрын
I kinda wish I had a grandpa like yours. I gotta build up my tool collection from scratch. You’re extremely blessed, man. AND you’re doing it all justice. Keep making videos. You got a subscriber for life.
@InheritanceMachining Жыл бұрын
Not a day goes by that I'm not thankful for what I have but more importantly the time I got to spend with my grandfather. Thank you so much for the support
@c4t4l4n4 Жыл бұрын
Each project ( & side projects) reinforces the foundational aspects of your machining skills. By improving your tools, you'll achieve consistency and repeatability in your measurements and dimensions. You are well on your way to becoming a toolmaker and it is a pleasure to watch this journey. 😊
@InheritanceMachining Жыл бұрын
Thank you! There's so much to learn so I'll get there one step at a time. But that's also why I love this so much!
@mrkenenglish Жыл бұрын
Side Projects! Your storytelling is fantastic, and the production values are great. Keep at it, I'm loving your channel!
@InheritanceMachining Жыл бұрын
That is very much appreciated! Thank you!
@3089io Жыл бұрын
Your editing is superb.
@InheritanceMachining Жыл бұрын
Thanks 😁
@edwinmerino2147 2 күн бұрын
You’re the man. Thank you.
@acky12489 Жыл бұрын
I'm a CNC machinist by trade but there's just something so satisfying about manual machines. Found you a couple days ago and have been binging through your videos. Keep up the good work friend.
@michaelespiritu2908 Жыл бұрын
Your videos are top notch and entertaining.
@jikemenkins7098 Жыл бұрын
10/10 you have some of the best home shop videos on YT right now. I'm glad you got the 246 blocks whipped into shape as well as the angle plate. Both are quite useful to have around, and now yours are in tip-top condition! It was a pleasure watching. FYI my vote is for longer less condensed videos, but I'll take what ever I can get 🙂
@InheritanceMachining Жыл бұрын
Wow thank you! I would 100% make these videos longer if I had the time! I spend just a long at the computer as I do in the shop 😂
@WmSrite-pi8ck Жыл бұрын
If you like this Channel go check out This Old Tony. He is basically the godfather of home shop videos. You can tell Brandon watches his videos by the videos Brandon puts together. And, of course, the godmother BlondiHacks is evident in Brandon's videos too.
@InheritanceMachining Жыл бұрын
@@WmSrite-pi8ck Both very big inspirations for me personally!
@Delta19G Ай бұрын
Thank you for sharing you’re amazing work
@Lone-Wolf87 Жыл бұрын
That was very relaxing to see how those rusty parts became brand new again. Well done. 👍👍👍👍
@InheritanceMachining Жыл бұрын
Thanks! The transformation was surprising to me as well!
@kgregory666 Жыл бұрын
Great work as always. I appreciate that you explain HOW and WHY you are doing what you're doing. I work in a prototype/job shop and precision is the name of the game.
@InheritanceMachining Жыл бұрын
Thank you! The precision in a lot of my projects isn't always strictly necessary but normally driven by a compulsion to do the best I possibly can.
@BruceNitroxpro Жыл бұрын
@@InheritanceMachining , I KNOW that feeling! We forget how our feelings make us driven to some levels not considered necessary, but totally believable!
@fellipec Жыл бұрын
Best machining channel of the month* on KZfaq. (* For months that This Old Tony don't upload videos)
@InheritanceMachining Жыл бұрын
😂 he set's the bar high! But ill take it
@Adler983 4 ай бұрын
Have you ever... YES!!! I have this old motor lying around and every other part of the car that was attatched to it. I went on dismanteling and ended up with a total stripdown. I am only procrastination away from building this in line four cylinder with only one cam to live up again.... Thank you for putting in this extra stress when you decide to film it all for us!
@henryworkswoodandmetal Жыл бұрын
Great project, even better narrative 👍
@InheritanceMachining Жыл бұрын
thank you!
@brianaustin5278 2 ай бұрын
I absolutely love your videos. I've been binge watching for the past couple of hours. I myself am a fellow machinist of 26 years. And I still see a few things you're doing that I didn't even think of!
@stevenking6400 Жыл бұрын
Inheritance machine shop is fast approaching being my favourite machining channel we all love a side project in the home shop
@InheritanceMachining Жыл бұрын
thank you so much! There are so many side projects if I didn't show they I wouldn't have much to show at all 😂
@Basdekip Жыл бұрын
I have no idea what this thing is, what it does and why its usefull, but this is some great stuff to just watch, listen and relax to.
@BruceBoschek Жыл бұрын
More than 30,000 subscribers in such a short time is evidence of the interest in your content and the valuation of your presentation. It is really satisfying to see those tools come to life, looking better than new. Thanks for your efforts to share this work with us.
@InheritanceMachining Жыл бұрын
It's surprising to me fore sure but I'm thankful for every last one of them. Thanks for the continued support, Bruce!
@Joemonster111 Жыл бұрын
Damn this channel is getting more and more entertaining. Thanks for the videos my man!
@InheritanceMachining Жыл бұрын
Thank you so much!
@GARFIAS8800 Жыл бұрын
Great videos, I started watching your channel since you started posting videos and I really like your content. As a fellow machinist myself i have learned some new tricks thanks to you. Keep up the great work.
@InheritanceMachining Жыл бұрын
That's great! I appreciate you following along
@Wintersmachineshop Жыл бұрын
Turned out to be a very nice piece , never hurts to have options . Great grinding methodology and order of operations. Nice work , thanks for sharing.
@InheritanceMachining Жыл бұрын
Thank you! One day everything in here will be cleaned up.
@danielsnyder656 5 ай бұрын
It's funny watching this video now. When you were fly cutting the face, I kept saying to myself "You have a precision machinist jack and a huge fly cutter already!" then I realized this video was before you made both of those.
@ZGreason Жыл бұрын
Eventually I see you making precision tools like Robrenz and Ox Tools. Keep up the good work
@InheritanceMachining Жыл бұрын
Those guys amaze me. Thank you!
@scottphilips8514 Жыл бұрын
I worked in a tool and die shop out of high school , I forgot how much I like machining 👍🏻, even if it is watching someone else
@patrickmazzone9066 Жыл бұрын
Excellent workmanship
@InheritanceMachining Жыл бұрын
thank you!
@RedDogForge Жыл бұрын
the marketing dept down at kurt are geniuses. lol. that logo makes every makers vid an advertisement for them.
@jodyvanliew2514 8 ай бұрын
You won't ever regret the work you did to get that angle plate correct . You can never have enough fixturing options .
@jessefoulk Жыл бұрын
I love the format of the channel. Very interesting. I keep returning. Keep it up.
@InheritanceMachining Жыл бұрын
Thank you! Will do
@thejonathandoan 9 ай бұрын
08:24 I never knew just how much I love a good chamfer until KZfaq suggested your channel. Thanks for scratching that itch oh so well!!
@Georgiaguntraining Жыл бұрын
Fascinating insights into precision. Thank you.
@user-kc4oj9xh1t Жыл бұрын
Such a high quality content, one of my favorite KZfaq channel, thank you for another video!
@InheritanceMachining Жыл бұрын
I really appreciate that! Thank you for following!
@joshuarikard3106 Жыл бұрын
Always excited when these videos drop! Honestly the best machining channel on YT!
@InheritanceMachining Жыл бұрын
thank you so much! 😁
@DavidLindes Жыл бұрын
I came to your channel to look for something else to show someone, and somehow realized I'd missed this video! A sort of blast from the past, because it's clearly of an older chronology in the life of your channel, and yet I'm still so glad to have picked this bit up. Dunno how I missed it in the first place, but, now I'm back up to speed! :)
@edsmachine93 Жыл бұрын
Very nice work. Thanks for sharing. Take care, Ed.
@InheritanceMachining Жыл бұрын
Thanks Ed!
@rodbutler9864 Жыл бұрын
Outstanding!
@rc_kev1231 Жыл бұрын
Love your videos! Made me smile to hear 12mm referred to as 0.475"
@InheritanceMachining Жыл бұрын
😂 Thanks!
@merkyworks Жыл бұрын
Watching this is very calming
@andrewdolinskiatcarpathian Жыл бұрын
Oh my, each project gets even more satisfying to watch than the previous. I so have surface grinder envy 👌👏👏👍😀
@nocturnhabeo 5 ай бұрын
NICE thanks for the video! I love tools to make tools to make tools videos!
@devinhiatt9995 Жыл бұрын
That sin plate be lookin crisp.
@InheritanceMachining Жыл бұрын
😎
@RedDogForge Жыл бұрын
its rarely a wasted effort when the end result is finished tools
@guataco Жыл бұрын
This is mesmerizing. Thank you. Very good filming.
@InheritanceMachining Жыл бұрын
😁 thank you!
@mikchrungBLADES 2 ай бұрын
Looooooove the intro music...clean and crisp...
@charlvanniekerk8009 Жыл бұрын
Its always a pleasure to watch you work. I certainly did marvel at the angle plates beauty at first and then was even more impressed by the reason you needed it! One more super accurate and functional tool to add to the shop. Brilliant!
@InheritanceMachining Жыл бұрын
Thank you! I getting there one step at a time!
@jeffwalker7185 Жыл бұрын
It is so satisfying and relaxing to watch your videos. Thank you.
@InheritanceMachining Жыл бұрын
Much appreciated!
@Brazos_Bait_Co. Жыл бұрын
Thanks you for another great video!
@6jonline Жыл бұрын
Just found your channel and binged all your videos over the last couple days. For this one, and lots of your other tools that don't like rust, spray them with fluid film, then wipe off the excess after about 20mins.
@InheritanceMachining Жыл бұрын
Thanks for the tip! I use a product that I think is similar called ACF-50
@carlhitchon1009 Жыл бұрын
A+ photography (and monologue).
@InheritanceMachining Жыл бұрын
Thank you!
@tomwagemans1872 Жыл бұрын
Nice to watch this on a saterday morning with a cup of coffee. Thanks!
@InheritanceMachining Жыл бұрын
Love to hear it. Thanks for watching!
@samsomething298 Жыл бұрын
Usually with content like this creators bore me with pointless information or whatever. But with your videos I genuinely can’t skip any of it because you’re just that entertaining with the way you present it.
@InheritanceMachining Жыл бұрын
I really appreciate you saying that. Thanks so much
@petermarsh4993 Жыл бұрын
Dear Brandon, not quite Suburban Tools but a long way through your journey. Thanks for sharing your lovely work.
@InheritanceMachining Жыл бұрын
Don Bailey is great! Surface grinding is one of the deepest rabbit holes one can get into for sure. Thanks!
@nunyabusiness3612 Жыл бұрын
Fantastic as always Brandon, thank you 🙏🏾
@InheritanceMachining Жыл бұрын
Thanks, N!
@Brandon-sc1fz Жыл бұрын
It’s ToT with slightly less dad jokes. Nice job 👍
@SuddenSpark 6 ай бұрын
Seriously enjoy your videos, how you process various problems, safe in the knowledge that you can fix it. Awesome. Well done sir! 🤘😎
@ridley674 Жыл бұрын
I love the little edition to what you previously done and then added this in order to improve that, so its not just one project done and the next. Love watching it though, very satisfying.
@InheritanceMachining Жыл бұрын
They are usually all connected in some way, shape, or form 😁
@tink2805 Жыл бұрын
The age old quest of chasing squareness
@ironlionwelding686 Жыл бұрын
Great work.
@eatenkate Жыл бұрын
You truly are an improver of Fridays!
@InheritanceMachining Жыл бұрын
😁 I aim to please!
@BCHonea Жыл бұрын
Love the content, love the narrating. Still improving in everything your producing. What a man!!! Your pops would be so proud
@InheritanceMachining Жыл бұрын
😁 thank you so much!
@jris Жыл бұрын
Restoring the usefulness of an old tool is never a waste.
@InheritanceMachining Жыл бұрын
True!
@mrgunn2726 Жыл бұрын
Another great video! Boy that surface grinder sure is handy!
@InheritanceMachining Жыл бұрын
Thanks! I use it basically any time I have the slightest excuse 😆
@dylanschmidt4166 Жыл бұрын
Dude I still can’t get over how beautiful that surface gauge turned out. I’ve been loving all of your videos too, they’re so good.
@InheritanceMachining Жыл бұрын
Thanks, man! I'm surprised how much I find myself using it too. Definitely the most worthwhile project to date.
@jackdelancey248 Жыл бұрын
Well worth my time, I always look forward to your projects 👍
@InheritanceMachining Жыл бұрын
Thanks!
@robbiepotts8541 Жыл бұрын
Great channel! I like all of the side projects that come up. Story of my life when trying to get something done.
@InheritanceMachining Жыл бұрын
Thank you! I don’t think there is a person alive that doesn’t have this problem 😂
@BruceNitroxpro Жыл бұрын
@@InheritanceMachining , Trust me, there are. LOL
@billabernathy1541 Жыл бұрын
That is some very nice precision work. Thanks for sharing. Very satisfying.
@InheritanceMachining Жыл бұрын
Thanks, Bill!
@timmymartin317 Жыл бұрын
Another great video in the books. Keep up the great work!
@InheritanceMachining Жыл бұрын
Thank you!
@vladyslavkotov7570 Жыл бұрын
The quality of vids are insane, narration is soothing and quiet. That's a 10)
@InheritanceMachining Жыл бұрын
Thank you so much!
@WeGoWalk 9 ай бұрын
Smooth, shiny, and square!
@tylerkrug7719 9 ай бұрын
Wow! You are really good at machining!
@yeagerxp Жыл бұрын
Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself, 🇨🇦
@InheritanceMachining Жыл бұрын
thanks!!
@camhutch8149 Жыл бұрын
Odly satisfying, well done
@InheritanceMachining Жыл бұрын
Thanks!
@Dusty_Ford Жыл бұрын
Exactly 15 minutes, nice!
@InheritanceMachining Жыл бұрын
Not on purpose but fits in a work break nicely 😉
@gensys244 Жыл бұрын
so enjoyable to watch amazing work fully reepect your care for detail
@InheritanceMachining Жыл бұрын
thank you!
@HP_rep_mek Жыл бұрын
That came out great👏
@InheritanceMachining Жыл бұрын
Thanks!
@martinu2725 Жыл бұрын
How does their channel only have 30k subscribers!? Come on KZfaq algorithm get recommending! Great video once again.
@InheritanceMachining Жыл бұрын
We'll get there slowly but surely. Thanks for the support!
@MisFakapek Жыл бұрын
Enjoyable as usual. Looking forward for weekly schedule some time in the future
@InheritanceMachining Жыл бұрын
I'd like to get there as well. Thanks as always!
@vayandas Жыл бұрын
I gotta say i ADORE what you are doing, so glad you popped up in my recommended a few months ago and god yes, side project galore is bane of my existence too xD
@InheritanceMachining Жыл бұрын
😂 the side projects come with the territory! I appreciate the support and kind words! thank you!
@aerobill8554 Жыл бұрын
Wonderful stuff. As a non-machinist myself I’m learning a lot. I thought I understood the step method at first, it now I’m doubting.
@RedDogForge Жыл бұрын
if ever an object begged for a bath in evaporust its that plate lol. that stuffs amazing.
@TobiasHoffmannWup Жыл бұрын
Always a pleasure seeing you upload!
@InheritanceMachining Жыл бұрын
😁 thank you!
@mattym8 Жыл бұрын
Very nice. The chamfers were the most satisfying
@InheritanceMachining Жыл бұрын
😁 thanks!
@mauserkk98 Жыл бұрын
Every side project is a bonus .
@InheritanceMachining Жыл бұрын
😁
@TrPrecisionMachining Жыл бұрын
good job..thanks for your time
@InheritanceMachining Жыл бұрын
thanks for watching!
@ThesisTheFox Жыл бұрын
beautiful video as always Brandon stay awesome and keep up the amazing quality
@InheritanceMachining Жыл бұрын
Thank you so much! Will do!
@bigdickdude007 Жыл бұрын
Now this is the type of machining channels i would want to spend hours watching ,, great work bro
@InheritanceMachining Жыл бұрын
thanks, man!
@johnlocke9609 Жыл бұрын
haha! The company was thinking: You finish the blocks!
@teebu Жыл бұрын
I have very little knowledge or interest in machining, but your videos are so good I watched them all. There is something relaxing about them. I enjoy good problem solving.
@InheritanceMachining Жыл бұрын
I love to hear that. Thank you
@Saminvent05 Жыл бұрын
Like side project inception!
@InheritanceMachining Жыл бұрын
😂
@natewarner359 Жыл бұрын
Good job
@MTknives Жыл бұрын
Looks great, nice work!
@InheritanceMachining Жыл бұрын
THanks, man!
@Ioughtaknowbetter Жыл бұрын
Nice! I have so many personal projects I want to do to this level of precision but at the moment I have to concentrate on making the Work stuff perfect. Someday, though. Your precision is an inspiration!
@InheritanceMachining Жыл бұрын
Thanks, Mark! It really does take so much longer once grinding gets involved. If I were machining for customers I would be in the same boat as you
@be007 Жыл бұрын
nice cleanup and accuratie !
@InheritanceMachining Жыл бұрын
Thanks!
@jamesmclemore7112 Жыл бұрын
Just stumbled upon your channel and wow, I think I’ve found a new favorite. Keep the great content coming!!
@InheritanceMachining Жыл бұрын
That is very kind! Thank you and welcome!
Inheritance Machining
Рет қаралды 648 М.