Making a Tool & Cutter Grinder - Hemingway Kits

No video

Making a Tool & Cutter Grinder - Hemingway Kits - Part 3

Рет қаралды 13,405

Күн бұрын

Here I build a tool and cutter grinder using plans and materials from Hemingway Kits.
The sheet metal parts were quite sharp and required a lot of deburring. They are all accurately to dimension and square, though.
The plans are nicely printed on A3 paper, although the dimensions are in imperial - not great for my metric machines. Before starting each part, I converted all the measurements to metric.
I wasn't sure how sturdy it would be, given the many sheet metal parts, but the completed machine feels very solid.
Some of the tools I use and would recommend (affiliate links):
Starrett Edge Finder: amzn.to/3wLbqRp
Dykem Layout Fluid: amzn.to/3Tp2Xw1
Starrett Hacksaw Blades: amzn.to/3PdsbuW
CT-90 Cutting and Tapping Fluid: amzn.to/49TH4uo
Eclipse Scriber: amzn.to/4c6Ck6w
STA-BIL Rust and Corrosion Inhibitor: amzn.to/3wFSbIJ
Dremel 3000 Rotary Tool: amzn.to/3Pa3gIH
Trend Digital Level Box: amzn.to/49Z0dee
Sealey Imperial Hex Key Set: amzn.to/3wJFvRd
ElectroCookie Solderable Breadboard: amzn.to/4a1Dez5
Mitutoyo MIT103-129 Micrometer: amzn.to/3wDB9ei
Mitutoyo 103-130 Micrometer: amzn.to/3V4lEGr
Engineer Solder Sucker: amzn.to/438RFiT
3M Silicone Face Mask: amzn.to/3SYOLbu
Irwin Hacksaw Blades: amzn.to/3TpLOlK
Irwin Metal Hacksaw: amzn.to/3V6SvKI
Starrett 117D Centre Punch: amzn.to/3V6hRIG
Big Gator Tools V-Drill Guide: amzn.to/3Tq6hXP
Faithfull Engineers Square: amzn.to/48Jt05p
Milwaukee Set of Drill Bits: amzn.to/48O9uVo

Пікірлер: 18

@howardosborne8647 3 ай бұрын

Looking good,Paul. You will find yourself making a number of modifications and additional attachments as you get more acquainted with the worden grinder. Making up curtain guards to keep grinding debris out of the table slides is one such mod. Adding diamond wheels and CBN grinding wheels on quick change hubs is another useful addition.....the CBN wheel will do a far nicer job of grinding/sharpening your end mills and slot drills than the white grit oxide wheel does and far less grinding dust to contend with. It would be good to see more videos in the future of this grinder and attachments in use

@PaulsGarageProjects 3 ай бұрын

Thanks for the info Howard! Adding a diamond wheel is a good idea, it would be handy to sharpen the carbide tooling that I have. I've got the drill bit attachment, to make next 👍

@nbrworks 3 ай бұрын

Didn't know this one, very cool. Thanks for sharing Paul!

@PaulsGarageProjects 3 ай бұрын

Thank you very much!

@kisoia 3 ай бұрын

Very nice work, thanks for sharing :)

@PaulsGarageProjects 3 ай бұрын

Thank you very much!

@camillosteuss 3 ай бұрын

Indeed!

@bbbnz50 2 ай бұрын

Great work

@PaulsGarageProjects 2 ай бұрын

Many thanks!

@Nobody-ld7mk 3 ай бұрын

Might not have been a bad idea to squeeze a shot of Dimond dressing the wheel with your fixture. "Great Shop Accessory" 👍

@PaulsGarageProjects 3 ай бұрын

Thanks! There's a shot of the diamond dresser in there, had to do it outside - makes a ton of dust!

@memyselfandeye1234 3 ай бұрын

very nice... Thank You Kindly .. peace

@PaulsGarageProjects 3 ай бұрын

Thanks!

@ParsMaker 3 ай бұрын

nice work, just missing an extractor 😇

@PaulsGarageProjects 3 ай бұрын

I'll install one of them when I build the secret underground workshop!

@ch5139 3 ай бұрын

I’m particularly liking the cold blued parts, can I ask what product you are using for the blueing?

@PaulsGarageProjects 3 ай бұрын

I used Phillips Professional Cold Blue, mixed about 1 to 3 with water. This is the best result I've got, possibly due to cleaning the parts in a tub of acetone before bluing. Also didn't touch the parts with my hands when transferring them to the cold blue. I then washed the parts in water and used WD40 to drive off the moisture. The next day, I coated them in Sta-Bil Rust Blocker, which I hope will help keep them rust free.

@ch5139 3 ай бұрын

@@PaulsGarageProjects thanks for the info 👍