out of all the car mod channels i think this is the only one where i actually learn something (apart from motionautotv). most the other channels either buy super expensive parts or get someone else to do the work for them. Fuckin love the content and keep it up Boiz

I predict this thing to turn into a monster one day, like the mr2 on 1320 eating Lamborghinis

new viewer here and big fan so far, i really like what you are doing and your content. I am really impressed with your drive and your mechanical skills! just do it and get it done! you're a hard worker and it shows. keep doing what you do!

You guys are Gs always boosting everything and always dropping videos keep up the good work

your about the only car youtuber that knows his shit and does not fake what he knows you do great work your going to have a blast in that boosted mr2 cant wait

Awesome to see you design your own parts and then install them.... alot of props to you..... very smart guy

Your vids are the best car vids on KZfaq as of now for me. This channel is gonna get big, keep it up!

Damn Kyle, you got some skills bro. That manifold looks great. I just paid $800 for a PLM top mount turbo manifold and 3" downpipe. The one that you made for the hatch looks almost identical.

video quality is improving! I like the music that was added in when you were welding

Boostedboiz have just the right amount of fabrication, fast cars, and fucking off. That's what makes any video they make, one I'll watch

Man, You can weld dime stacks , VERY IMPRESSED ... Great video Great BUILD as well KEEP on going strong buddy

Nice fab work there. Grind, polish, and wrap.

love your videos always waiting for the new ones to come out

It's crazy how much better you've gotten at welding!

This was a very well put together video. More like this and you may just end up the next 'mighty car mods'

pretty good work you doing there mate, subscribed keep it up

Very good videos and love the mr2 keep up the good work !

Are Boosted Boiz and B is for build the only auto vloggers who actually get shit done? BoostedBoiz is my favorite channel.

nicely done, you have some mad welding talent.

Thanx for this video I’m gonna have to learn tug welding I’m nervous about it but gotta do it 👍

Props on the welds.....looking great!!!!

I dig how that high comp motor doesn't hesitate to start

I love watching your videos every time I get a notification "Boosted Boiz uploaded a video" I stop what ever I'm doing I love you guys!

welds look good. love following your videos!

You make tig welding look easy! I can stick and mig weld just fine, but my tig skills are garbage lol! I guess just more practice! Hf tig seems easier though, I only have scratch tig! Looking forward to seeing the mr2 boosted, love the vids, always awesome content!

Those are nice welds. You should do tutorial how to Tig. And aslo what's size of that cup it's huge.

thats sick how yas make your own manis. its basically a homemade ram horn manifold. deff pretty cool.

Mad respect on the DIY turbo mani fold, I know it can be a PITA sometime. looking good

I've got a fever and the only prescription is more BoostedBoiz!

people hate on log manifolds , but i like them , very little boost creep, if any, nice and easy installation. For most people it's all they need for their stock motor power goals.

so..... am I the only one that comes back multiple times a day to see if a new video has dropped? Haha really enjoy watching your vids you guys. keep it up!

jealous of your welding skills man, great work

this was a great video! Nice work

You guys have the coolest videos

good stuff got it done real quick

Great vids man, your a cool guy !!!

Man that camera focus had me imagining what it must be like being Charlie.... 👲🇯🇵

Waiting all night for this

Thank you for showing us how you work on your cars

could u maybe make a small video about the reliability of ebay turbo's? u guys have the experience

Honestly the best channel ever

following this build since day 1! loving the progress on it. i was gonna say... you should just go ahead and cut up the trunk firewall ahead of time. every k series build ends up cuting it up to fit big turbos, it's a lot easier and not really necessary. also, can I ask what welding setup you used for that manifold? tungsten, filler, gas lens size, gas flow etc... it looks soo good for not having backpurged!

This guy is like the DIY king. He's probably gonna build a 1000hp civic from home depot and eBay stuff

First... Noice work... that looks badass! Mr Dos is gonna be a beast!

Are you going to be doing a water to air intercooler? I could see having some cooling/intake temp issues due to the minimal airflow in the rear.

good job as always 👌 🔥

Awesome man

layout some sandpaper onto a flat pane of glass or mirror to resurface the the flange on the header. it works on cylinder heads as well. Also, "weldingtipsandtricks"

Watched this vid while on my lunch break 🤣

Enjoyed the editing of this vid

You are gonna ditch the hatch quite fast for the RWD goodness. Diff is welded or LSD right?

Your channel is way more interesting than haggard garage. Glad to see you guys have a video almost every day.

I normally wake up and watch your recent upload. Today I was like, WHAT'S WRONG? it's ok it's here now

damn that mani looks good nice job

Whaaaaat already? Hell yeah!

Not bad, looking very good, almost like it belongs in there

I was leaving the meet in my v6 mustang but then got boostedboiz notification so I had to turn into the crowd

that's look pretty nice job u did there

Love seeing all the predictions and now he’s one of the fastest sw20s

Sweet log mani!

pretty clean.

this is amazing skill boss . a great thanks and love .....

When you end up doing the next turbo manifold for it, I hope you go with a design similar to the hatch. And actually, you had it right the first time. The pipe should actually be smaller than the whole in the flange. The proper way is: Oval the pipe until it fits in the flange, tac weld it to the flange on the wide sides, then hammer the pipe into the corners with something blunt, weld all the way around inside n out. it'll stretch to fit perfect trust. I think its Finnegans Garage that has a video on how to properly make turbo headers, very informative. I know this one was kinda thrown together as a mock up and to get the car running. But for the next one ;). Anyway. Keep it up. Much love to the boosted bois.

awesome insightful video, would be cool if you made a video on tig tutorial

BoostedBoiz Nice job on the Manifold Bro.

at 9:03 me reaching for my glasses .....you... if i can get this thing to focus "Holy Crap!" I thought it was me lol

Nice DIY manifold!

I literally can't wait for the nex vlog post

Man I wish I had your skills and knowledge. I would love to be able to boost a car in a day. Goals... love from Sacramento, CA #BoostisLife

very nice work 👍

Nice welding, I think you really should sell these kind of manifolds and any other specials.

This car is going to be a blast to drive

that turbo manifold came out nice!

Interesting seeing the t pipes. I would like to see this same config for an inline 6

Great job! Can you tell me which metal pipes did you choose? Thickness and diameter? What type of steel? Thanka

That's a dope manifold

Nice work sir

❤can wait to get my welding skills up❤

finished watching this after watching another channel blow up their turbo car. such refreshing work.

ABOUT TIME KYLE I WAS WAITING

Lookin' good.

Awesome🤘do you think the clutch or injectors will limit it then?

Hey T, do you guys use the compressor maps for selecting the right turbo for the application you want?

How hard is it to weld with tig? I would like to get one and learn. Also, what did you pay for it?

That's the specs on your welder settings? ie. Amps, purge time, cupsize?

hey man do you want a turbo from a 2012 STI? i got one from my job and its just sitting in my trunk

where do you put the intercooler on that thing ? May I suggest a water to air set up?

we dem boiz!!!!

Down and dirty log-style. Bet it still makes good power.

3:00 the camera started to see the world just like i do without glasses

you guys get shit done no question about it

love it

welding timelapse was cool

That Lincoln 3350 helmet, love mine

What are you going to do for an intercooler on the mr2? You gonna do a water to air cooler?

Nice!

Hey Kyle, how much power did you end up making on this? I’m getting something similar

thats whay better than what you had on there before

Beast

Hey I doubt you guys will see this but if the manifold did really get that hot it might be a good idea to have the surface check to make sure it hasnt warped. also do you guys plan on running a scavenging system for the turbo seeing as how close it is to the pan.