No video
Making an Economy Bowl
Рет қаралды 436,726
6 жыл бұрынIn this video I am trying my hand at making a bowl from a board or as some people refer to them an economy bowl. I am still very much a novice wood turner and although this bowl didn't turn out as well as I would have liked I learned a lot by making it. There are a few things I will do differently on the next one that I learned by doing this one and hopefully the results will be better.
The music on this video is from the KZfaq Audio Library and is listed below:
NirvanaVEVO by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommon...)
Source: chriszabriskie....
Artist: chriszabriskie....
Prelude No. 21 by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommon...)
Source: chriszabriskie....
Artist: chriszabriskie....
The Temperature of the Air on the Bow of the Kaleetan by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommon...)
Source: chriszabriskie....
Artist: chriszabriskie....
@georgerothfuss9576 6 жыл бұрын
The third time to watch the video, each time it just becomes a no brainer, but more remarkable what one can do turning.
@roberttill3787 2 жыл бұрын
Dave, i hope you are still making bowls like this. The bowl may have been your first attempt at a bowl like this but its far better than you seem to think. Its great!
@lydian8 5 жыл бұрын
I am addicted to wood turning videos. I've seen tons getting ready to start turning myself. Your work is beautiful. While I won't start here, I aspire to doing something as gorgeous as this one day.
@stephenogutu4535 5 жыл бұрын
Hello
@stephenogutu4535 5 жыл бұрын
I like your wood turning biuttyfull
@danielibnz 5 жыл бұрын
I feel the same. I made my living as a Telecomm engineer and Service Mgr. Now I feel I missed something, which I have to get...
@sameerbaig4335 4 жыл бұрын
Excellent craftsmanship Dave 👏👏👏👏👏👍👍👍👍❤️❤️
@1010mjl1 4 жыл бұрын
Awesome bowl I would have never thought of that.
@DaveGatton 4 жыл бұрын
Thank you for watching.
@muhammedshafi6010 5 жыл бұрын
Great piece of art
@djs240 4 жыл бұрын
Really enjoyed. Nice work
@fixnurac 6 жыл бұрын
Great job Dave. I couldn't figure out how you cut the angles until I realized you had the bed tilted on the band saw. The Bowl looks awesome. Merry Christmas. Thanks for all the information the other day. It was great meeting you. Let me know if you need any more project wood. I have plenty at the house that is dry.
@DaveGatton 6 жыл бұрын
Billy Bob Thanks for watching. I'll give you a call soon.
@ericluscombe3272 2 жыл бұрын
that sure turned out nice
@warrenvannuil8401 2 жыл бұрын
Nice bowl Dave
@DaveGatton 2 жыл бұрын
Thank you.
@Rebiai 3 жыл бұрын
that is art. real and useful art. great work
@briangossett 6 жыл бұрын
Well done. I am making my first attempt at one of these bowls. I wish I had seen your video sooner. 😀
@elliottsimkins74 2 жыл бұрын
Great job!!
@DaveGatton 2 жыл бұрын
Thank you! I appreciate you watching!
@martinwhitman1705 6 жыл бұрын
I agree with Mark........ Merry Christmas and have a Great and Safe New Year..............
@DaveGatton 6 жыл бұрын
Martin Whitman Merry Christmas to you and thanks for watching Martin.
@joshiaswithshivam5256 4 жыл бұрын
Mr. Dave you impressed by art and Passion . In this age you do hard work
@matthewclemente420 4 жыл бұрын
Great Video ! I love your design execution and quite video
@danielibnz 5 жыл бұрын
OMG, good video, process, and a wonderful idea, perfectly manufactured. Thanks for sharing. God bless you
@grain-diose 5 жыл бұрын
Great economical solution!
@AllenOxendine 3 жыл бұрын
Watching again, I’m a beginner turner so I need all the help I can get lol. Beautiful Piece
@AI_CANISTER 5 жыл бұрын
I've watch many of this kind but this video makes me fell to be like u... Ur so creative... If I want to be a wood turner ur the one I will learn from... # 5 stars ✋
@thesaltycracker7102 5 жыл бұрын
Very well done. Excellent video.
@anthonymaida5718 6 жыл бұрын
Thanks Dave Beautiful Bowl, I will have to try one someday.
@moonwoodworks4607 5 жыл бұрын
That's a great looking bowl there. One of these days, sooner or later I'll get the tools to cut stuff and make bowls like that also.
@massilamany 5 жыл бұрын
Very nice work.
@mostabcher5093 4 жыл бұрын
الاتقان يريح النفس وينشر السعاده شكرا عملك المتقن اسغد ارواحنا من مصر احترامي وتقديري
@DaveGatton 4 жыл бұрын
Thank you.
@ldzeppelinsurban 5 жыл бұрын
Super beautiful, GREAT job!!! The only thing slightly negative I'll say (and believe me, I'm reaching here!) is Titebond 3 leaves dark joints. Titebond 2 is just as waterproof (relatively speaking) with lighter joints.
@evandrouniao 5 жыл бұрын
Great Job And thanks for posting !
@DaveGatton 4 жыл бұрын
Thanks for watching.
@jaymyers7900 2 жыл бұрын
Ahhhhh the drum sander.....don't have one, so I assume that proves to be a major hindrance in making these and other segmented type bowls
@rinofriio97 5 жыл бұрын
Wow is that ever beautiful.... You know you're a artist when you can do that...I know you are... Loved watching. Thanks so much
@DaveGatton 4 жыл бұрын
Thanks for watching.
@Gasparin-ix6uv 5 жыл бұрын
Beautiful job
@MoonpieCreations 6 жыл бұрын
Came out nice. I think the great thing about these bowls is the ability to make some great designs easily. If you would have offset each layer you could have had changed what the bowl looks likes. Kind of a swirl pattern. Just a thought for next time. Ken
@DaveGatton 6 жыл бұрын
Ken Moon - Moonpie Creations Thanks Ken. Yes I plan to try many different patterns for different looks. Thanks for watching my friend.
@elsayedmamdouhelsayedmoham1542 5 жыл бұрын
Excellent work from Cairo
@SterlingsWoodcrafts 6 жыл бұрын
Never seen one done this way, very cool Dave, Beautiful
@DaveGatton 6 жыл бұрын
Thanks for watching Sterling. You should try one. It sure uses a lot less wood this way. :-)
@maazy900ichwa2 5 жыл бұрын
Great job very nice
@thehamlinwoodshop 6 жыл бұрын
Merry Christmas Dave. Thank you for all your work this year!
@DaveGatton 6 жыл бұрын
The Hamlin Woodshop Thank you so much for the kind words.
@ljgault 2 жыл бұрын
Just found this video, that came out nice..
@essamafifi5285 4 жыл бұрын
This is beautiful art
@mickegayver 5 жыл бұрын
très beau travail !! monsieur !!
@mdavies441 6 жыл бұрын
Very nice Dave!
@antoniobaggio2356 5 жыл бұрын
Ótimo trabalho, parabéns
@kazadthebad9995 5 жыл бұрын
Beautifully made project, I also have the amazing little Nova Comet 2 lathe 🤘
@DaveGatton 4 жыл бұрын
Thanks for watching. The Nova Comet II is a great little lathe.
@richardentwistle8980 4 жыл бұрын
Great video and fabulous bowl ! Two side thoughts: great to see I am not the only one to use my table saw or bandsaw top as a workbench and thought about your angled cutting and neighbor from many years ago who had , think it was called a ring master or ring maker and it sort of used your method. I think the company went under as I have not seen or heard about them in years. I'm looking forward to watching your other videos.
@bradqueen8483 6 жыл бұрын
Absolutely beautiful bowl Dave! I just started turning myself but I'm still on twig pots and mushrooms. Be careful with that bandsaw. Mine bit me the other day now I can't do anything for several weeks. Been woodworking for 35 years and this was my first accident with a saw. Got complacent. 😔
@jamersonbarbo2640 5 жыл бұрын
Beautiful...
@edkorsberg6441 5 жыл бұрын
Can you share the dimensions of the circles you cut and also at what angle did you set the bandsaw at? What a great idea, I would love to see if I could repeat what you have done if you are willing to provide details.
@khaledwoods58 5 жыл бұрын
nice work
@seyievetolohe2151 5 жыл бұрын
I wish I could create something like this. Great job👍👍👍👍
@DaveGatton 4 жыл бұрын
Thank you!
@jackskelton6773 5 жыл бұрын
Amazing 👍👍👍👍👍
@LoneWolf-yp2mo 5 жыл бұрын
Awesome job ! I believe the lathe is the greatest tool for individual creativity !! I'll be looking for your next project ! In the mean time, you have inspired me to get back out in my shop and come up with something on my own .... or just copy THIS beautiful work of Art !! Thanks again !!!
@georgerothfuss9576 6 жыл бұрын
I like the construction process, starting with the glue up but then the bandsaw thru me, not expecting that, but efficient.
@DaveGatton 6 жыл бұрын
George Rothfuss it a different way to make a bowl without having 3/4 of your material in shavings on the floor when you're finished. :-)
@georgerothfuss9576 6 жыл бұрын
Indeed, a smart use of resources. As I watched the video it became clear that that is a much more econimical way to use wood.
@DaveGatton 6 жыл бұрын
George Rothfuss Yes. The original glue up was 24" long by 6" wide and 1" thick.
@almuslawi 5 жыл бұрын
You are really creative
@53Richy 5 жыл бұрын
Wonderful
@masf1977 6 жыл бұрын
Very nice Dave! Merry Christmas!!!
@DaveGatton 6 жыл бұрын
Manny S Thank you for watching Manny.
@1369Lizard 3 жыл бұрын
Great video and technique! I noticed you are using Titebond III, totally waterproof glue. I love Titebond glues but find that the III has a darker color and makes bond lines more apparent. I am going to try to copy your work but use Titebond II which is very water resistant and makes bond lines less noticeable in my opinion. I have no plans to have this bowl submerged for any appreciable time. I am now going to look for your later versions. Thanks!
@burnettescustomwoodworks5834 6 жыл бұрын
Beautiful
@MAGICTOUCH_MUMBAI 5 жыл бұрын
Hi there, I am from India, I am in the field of Laser cutting and Engraving, you have titel of your video "economic" but you have did lot of work ... Very nice video and hattsoff your work... Like it
@stuinNorway 5 жыл бұрын
The "economy" in the title comes from using thinner strips of wood and gluing together, rather than use a single, large expensive piece of timber. Thus is can often be made using offcuts from other projects rather than buying new wood.
@DesertBumWoodWorkn 6 жыл бұрын
Nice Bowl Dave. Merry Christmas and Happy New Year to you and your Family
@DaveGatton 6 жыл бұрын
DesertBum WoodWork'n Merry Christmas to you and thank you so much for watching.
@rasputinalive8688 5 жыл бұрын
Amazing
@HarnealMedia 6 жыл бұрын
Very nice Dave.
@DaveGatton 6 жыл бұрын
Harneal Media Thanks for watching Steve.
@darioprimeiro 5 жыл бұрын
Nice work - Congratulations
@garymac121 4 жыл бұрын
Dave this is a beautiful bowl and the wood grains are terrific ! I saw you angled your bandsaw table. Can you tell what angle you used? Thanks and all the best!
@DaveGatton 4 жыл бұрын
Thanks for watching Gary. The angle is 45°.
@g-codeonedesign9578 6 жыл бұрын
Great video Dave !
@DaveGatton 6 жыл бұрын
Gcodeonedesign Thanks Juan. Much appreciated.
@Kaasbaas045 5 жыл бұрын
Real craftsman
@samroberson6921 5 жыл бұрын
I am not much a fan of segmented bowls, but I like what you have done on this bowl. I love the way cutting each ring at an angle preserves the "stripes." Never would have thought of that. Any thoughts on how to minimize the glue lines for each layer? All-in-all a good job, Dave.
@kishoreelalgurjar9293 5 жыл бұрын
Sam Roberson hii
@-ZIO 3 жыл бұрын
very efficient use of hardwoods.
@skydiver72 4 жыл бұрын
Amazing...
@maribelru2011 3 жыл бұрын
You are living my dream life! Wood, glue, tools, ample space...sigh
@eliasmirartes4264 5 жыл бұрын
Lindo projeto parabéns.
@bobbyorr6560 6 жыл бұрын
nice job Dave, good on you
@DaveGatton 6 жыл бұрын
bobby orr Thank you for watching Bobby.
@karlmaskos751 3 жыл бұрын
Two questions if I may, what angle was your bandsaw when you cut the blanks and wide were those cuts as everything lines up so well
@Belg1970 3 жыл бұрын
Doesn't look like you got a reply to this question?
@karlmaskos751 2 жыл бұрын
@@Belg1970 nope but I did try one and tried about 30 / 35 degrees with some success but still learning
@karlmaskos751 2 жыл бұрын
Pat I see further below he mentions 45 degrees enjoy
@rajeshkrtewari2543 5 жыл бұрын
DIVINE WORK.....SIR 💯/💯
@DaveGatton 4 жыл бұрын
Thanks for watching.
@stewart51able 6 жыл бұрын
beautiful...!
@tdkrei 5 жыл бұрын
HI Dave, you must have a much better perspective with band saw cutting than I , tried one of these and a complete disaster. I have however turned over 50 segmented with great (I think) success. Nice job.
@jashanjgally1098 5 жыл бұрын
Very nice 🙏🙏🙏🙏👌👌👌👌
@thuwira1985 4 жыл бұрын
Amazing 💪
@user-lu6ud1rr1p 5 жыл бұрын
very good
@oscarmwamburi4678 2 жыл бұрын
From Kenya.. good job Sir.what angle did you tilt the band saw. Thanks
@mversantvoort 6 жыл бұрын
Cool idea to save some money!
@DaveGatton 6 жыл бұрын
Maikel Versantvoort Thank you for watching Maikel.
@carljohnmccracken2713 5 жыл бұрын
beautiful..
@rangaguru6258 4 жыл бұрын
You are great good job
@PawPawsWorkShop 6 жыл бұрын
I believe you did an excellent job
@amitatmsu 3 жыл бұрын
Great idea sir. You saved lot of wood in making of this pot. Why no epoxy coatings, is it to avoid it for applocation related to food?
@carybrown3192 5 жыл бұрын
Some commentary explaining your steps would be helpful!( even subtitles)
@edejamircosta 4 жыл бұрын
Shooooooooow.............parabéns!
@sovadinda1802 4 жыл бұрын
How nice
@georgerothfuss9576 6 жыл бұрын
Merry Christmas Dave
@DaveGatton 6 жыл бұрын
George Rothfuss Merry Christmas George.
@bw162 3 жыл бұрын
Dave, I think you need to use more glue in those glue-ups. 😆
@navjotsingha1110 5 жыл бұрын
Nice
@AffordBindEquipment 5 жыл бұрын
God gave us 10 glue spreaders and I am glad for once to see someone using them. Love the music.
@loustick2688 4 жыл бұрын
C'est magnifique 🥰
@richardking4725 5 жыл бұрын
Thanks Dave
@mallen100000 6 жыл бұрын
Nice bowl for being number 1
@DaveGatton 6 жыл бұрын
Mark Allen Thanks for watching Mark.
@josechaves8256 4 жыл бұрын
Congratulations for this beautiful work. Please can you tell me how you made the bevel in the wood?
@daisyishii3438 4 жыл бұрын
Mágico 😍
@VovaEntertainment 4 жыл бұрын
yield beauty
@nctplarry 4 жыл бұрын
Great job, Dave! At what angle do you put your band saw table when you cut those sections? I think I have that info in some notes around here, but cannot find them at the moment. I have a few pieces of cherry, walnut, maple, mahogany, and bubinga that I think would make a great gift for a Christmas party at the Toyota Foundation where I am consultant. High fives, sir! Greetings from the Elvis Presley Birthplace -- Tupelo, MS!
@nctplarry 4 жыл бұрын
Found the info in my notes. The first cut is made at a 90-degree angle. Each subsequent cut is made with the table tilted at 45-degrees. While there are variations to these, those two angles seem to be the most common. Keep up your great work!
@michaelbarsamian3244 5 жыл бұрын
Hi Dave, watched your video a few times on the economy bowl. I'm missing a few things alone the line. You glued about 8 boards the first time. Did you glue the second set to the first set or double sided tape between. I've tried this on thinner wood and didn't do so well. you do have great control of the band saw on the semi circles. I'd like to hear back from you ..Thanks Mike
@laralara6438 5 жыл бұрын
Bayıldım. Very good
@petricabistricean1806 2 жыл бұрын
super tare
@DaveGatton 2 жыл бұрын
Thank you.
@michaeldean-jackson8242 5 жыл бұрын
Greetings from South Africa. Like you, I too have only begun woodworking late in life. I came across your video and was amazed. At what angle did you cut the half-rounds (I think one calls them that) before the gluing process and lay-out began? Thank you for sharing this video. Regards. Michael Dean-Jackson
Klondike Craftsman
Рет қаралды 83 М.
Woodworking Craft
Рет қаралды 273 М.